X-Git-Url: http://git.annexia.org/?a=blobdiff_plain;f=virt-p2v.pod;h=6978b2faf07fa10b0c34afdadad74899cbeccb40;hb=3eb1aa5b513f0ae2bad0ec7a62831714cdb17c14;hp=5d82b38e69d620ff81d9e4c7bd292d163fe5089c;hpb=65b46ce56a110e798c9a21f99eb7969f5ca073e3;p=virt-p2v.git

diff --git a/virt-p2v.pod b/virt-p2v.pod
index 5d82b38..6978b2f 100644
--- a/virt-p2v.pod
+++ b/virt-p2v.pod
@@ -84,6 +84,11 @@ In this mode, the live CD attempts to reuse the network configuration
 from the physical machine's root filesystem.  You should probably try
 this method even though occasionally it does not work.
 
+=item Ask for fixed IP address and gateway
+
+In this mode the live CD will ask you for a fixed IP address and
+gateway address, and will configure your chosen interface with these.
+
 =item Configure from the shell
 
 In this mode you will be dropped into a command shell and you will
@@ -99,6 +104,12 @@ interface would be:
 where C<AA.BB.CC.DD> is the IP address and C<GG.HH.II.JJ> is the
 gateway.
 
+=item QEMU user network
+
+This option configures the network for use inside a QEMU user network
+(L<http://fabrice.bellard.free.fr/qemu/qemu-doc.html#SEC30>).  It
+should only be used by developers.
+
 =back
 
 =item Devices
@@ -176,6 +187,17 @@ addresses are not tested for uniqueness so there is a very small
 chance that they could coincide, which would leave a guest unable to
 access the virtual network.
 
+=item Compression
+
+Choose whether to enable or disable compression on disk images as they
+are copied across the network.
+
+If enabled, the C<-C> option is passed to L<ssh(1)>.  On fast networks
+this can sometimes be slower.
+
+NB: The disk image is still stored uncompressed on the remote host
+however this option is set.
+
 =item Verify and proceed
 
 In this step you are asked to verify the settings above.  If any are
@@ -356,9 +378,35 @@ For a logical volume (eg. C</dev/VolGroup00/LogVol00>), use:
 
 =item C<network>
 
-Set this to the choice for network setup.  Use either C<Some Auto> or
-C<Some Shell> for auto-configuration or shell (manual) configuration
-respectively.
+Set this to the choice for network setup.  Use one of:
+
+=over 4
+
+=item C<Some Auto>
+
+for auto-configuration
+
+=item C<Some Static>
+
+to specify the interface, address, netmask and gateway statically
+
+=item C<Some Shell>
+
+to launch a shell
+
+=item C<Some QEMUUserNet>
+
+to use a QEMU user network (developers only)
+
+=back
+
+=item C<static_network_config>
+
+This setting only applies if C<network> is set to C<Some Static>,
+in which case you should set this to the static network settings,
+a tuple of (interface, address, netmask, gateway, nameserver):
+
+ Some ("eth0", "192.168.2.5", "255.255.255.0", "192.168.2.1", "192.168.2.1")
 
 =item C<hypervisor>
 
@@ -399,6 +447,11 @@ reserved for Xen guests.  These MAC addresses are not tested for
 uniqueness so there is a very small chance that they could coincide,
 which would leave a guest unable to access the virtual network.
 
+=item C<compression>
+
+Set this to C<Some false> to disable compression, or C<Some true> to
+enable compression, or C<None> to ask the user.
+
 =back
 
 =head2 ISO ATTACHMENTS
@@ -444,6 +497,12 @@ where C<qemuimage.img> is the name of the QEMU/KVM image.
 
 You can also supply an C<HDB> parameter to specify a second disk.
 
+=head1 MAILING LIST
+
+Please direct questions to the et-mgmt-tools mailing list
+L<http://www.redhat.com/mailman/listinfo/et-mgmt-tools>
+<et-mgmt-tools @ redhat . com>
+
 =head1 SEE ALSO
 
 L<virsh(1)>,