X-Git-Url: http://git.annexia.org/?a=blobdiff_plain;f=virt-p2v.pod;h=3018389729954f157a1ee82f5bf815fb621444ae;hb=c0f46d12532b726bdca5e38b551813acadc55d15;hp=cf9cc0ae774ee5abf2a3deb832a73de23ceb3fd9;hpb=b4d5de4486026b6bced5736b1ade74c6c715fc28;p=virt-p2v.git

diff --git a/virt-p2v.pod b/virt-p2v.pod
index cf9cc0a..3018389 100644
--- a/virt-p2v.pod
+++ b/virt-p2v.pod
@@ -84,6 +84,11 @@ In this mode, the live CD attempts to reuse the network configuration
 from the physical machine's root filesystem.  You should probably try
 this method even though occasionally it does not work.
 
+=item Ask for fixed IP address and gateway
+
+In this mode the live CD will ask you for a fixed IP address and
+gateway address, and will configure your chosen interface with these.
+
 =item Configure from the shell
 
 In this mode you will be dropped into a command shell and you will
@@ -99,6 +104,12 @@ interface would be:
 where C<AA.BB.CC.DD> is the IP address and C<GG.HH.II.JJ> is the
 gateway.
 
+=item QEMU user network
+
+This option configures the network for use inside a QEMU user network
+(L<http://fabrice.bellard.free.fr/qemu/qemu-doc.html#SEC30>).  It
+should only be used by developers.
+
 =back
 
 =item Devices
@@ -356,9 +367,35 @@ For a logical volume (eg. C</dev/VolGroup00/LogVol00>), use:
 
 =item C<network>
 
-Set this to the choice for network setup.  Use either C<Some Auto> or
-C<Some Shell> for auto-configuration or shell (manual) configuration
-respectively.
+Set this to the choice for network setup.  Use one of:
+
+=over 4
+
+=item C<Some Auto>
+
+for auto-configuration
+
+=item C<Some Static>
+
+to specify the interface, address, netmask and gateway statically
+
+=item C<Some Shell>
+
+to launch a shell
+
+=item C<Some QEMUUserNet>
+
+to use a QEMU user network (developers only)
+
+=back
+
+=item C<static_network_config>
+
+This setting only applies if C<network> is set to C<Some Static>,
+in which case you should set this to the static network settings,
+a tuple of (interface, address, netmask, gateway, nameserver):
+
+ Some ("eth0", "192.168.2.5", "255.255.255.0", "192.168.2.1", "192.168.2.1")
 
 =item C<hypervisor>