X-Git-Url: http://git.annexia.org/?a=blobdiff_plain;f=python%2Fguestfs.py;h=678e298e9eb894271b47df740d09ae34d558bd2b;hb=15e0fd573a87488c66cb3a6f0da01f3ab5f2f6ed;hp=4a23cdbb02037788259fa031ec675b25ca7ae4db;hpb=e118c14b9552de311cbc1734e03a3226b484c1e8;p=libguestfs.git

diff --git a/python/guestfs.py b/python/guestfs.py
index 4a23cdb..678e298 100644
--- a/python/guestfs.py
+++ b/python/guestfs.py
@@ -279,6 +279,15 @@ class GuestFS:
         """
         return libguestfsmod.set_ready (self._o)
 
+    def end_busy (self):
+        u"""This sets the state to "READY", or if in "CONFIG" then
+        it leaves the state as is. This is only used when
+        implementing actions using the low-level API.
+        
+        For more information on states, see guestfs(3).
+        """
+        return libguestfsmod.end_busy (self._o)
+
     def mount (self, device, mountpoint):
         u"""Mount a guest disk at a position in the filesystem.
         Block devices are named "/dev/sda", "/dev/sdb" and so
@@ -700,7 +709,7 @@ class GuestFS:
 
     def mkfs (self, fstype, device):
         u"""This creates a filesystem on "device" (usually a
-        partition of LVM logical volume). The filesystem type is
+        partition or LVM logical volume). The filesystem type is
         "fstype", for example "ext3".
         """
         return libguestfsmod.mkfs (self._o, fstype, device)
@@ -743,6 +752,11 @@ class GuestFS:
         calculated using "strlen" (so in this case the content
         cannot contain embedded ASCII NULs).
         
+        *NB.* Owing to a bug, writing content containing ASCII
+        NUL characters does *not* work, even if the length is
+        specified. We hope to resolve this bug in a future
+        version. In the meantime use "g.upload".
+        
         Because of the message protocol, there is a transfer
         limit of somewhere between 2MB and 4MB. To transfer
         large files you should use FTP.
@@ -1190,3 +1204,106 @@ class GuestFS:
         """
         return libguestfsmod.grub_install (self._o, root, device)
 
+    def cp (self, src, dest):
+        u"""This copies a file from "src" to "dest" where "dest" is
+        either a destination filename or destination directory.
+        """
+        return libguestfsmod.cp (self._o, src, dest)
+
+    def cp_a (self, src, dest):
+        u"""This copies a file or directory from "src" to "dest"
+        recursively using the "cp -a" command.
+        """
+        return libguestfsmod.cp_a (self._o, src, dest)
+
+    def mv (self, src, dest):
+        u"""This moves a file from "src" to "dest" where "dest" is
+        either a destination filename or destination directory.
+        """
+        return libguestfsmod.mv (self._o, src, dest)
+
+    def drop_caches (self, whattodrop):
+        u"""This instructs the guest kernel to drop its page cache,
+        and/or dentries and inode caches. The parameter
+        "whattodrop" tells the kernel what precisely to drop,
+        see <http://linux-mm.org/Drop_Caches>
+        
+        Setting "whattodrop" to 3 should drop everything.
+        
+        This automatically calls sync(2) before the operation,
+        so that the maximum guest memory is freed.
+        """
+        return libguestfsmod.drop_caches (self._o, whattodrop)
+
+    def dmesg (self):
+        u"""This returns the kernel messages ("dmesg" output) from
+        the guest kernel. This is sometimes useful for extended
+        debugging of problems.
+        
+        Another way to get the same information is to enable
+        verbose messages with "g.set_verbose" or by setting the
+        environment variable "LIBGUESTFS_DEBUG=1" before running
+        the program.
+        """
+        return libguestfsmod.dmesg (self._o)
+
+    def ping_daemon (self):
+        u"""This is a test probe into the guestfs daemon running
+        inside the qemu subprocess. Calling this function checks
+        that the daemon responds to the ping message, without
+        affecting the daemon or attached block device(s) in any
+        other way.
+        """
+        return libguestfsmod.ping_daemon (self._o)
+
+    def equal (self, file1, file2):
+        u"""This compares the two files "file1" and "file2" and
+        returns true if their content is exactly equal, or false
+        otherwise.
+        
+        The external cmp(1) program is used for the comparison.
+        """
+        return libguestfsmod.equal (self._o, file1, file2)
+
+    def strings (self, path):
+        u"""This runs the strings(1) command on a file and returns
+        the list of printable strings found.
+        
+        This function returns a list of strings.
+        
+        Because of the message protocol, there is a transfer
+        limit of somewhere between 2MB and 4MB. To transfer
+        large files you should use FTP.
+        """
+        return libguestfsmod.strings (self._o, path)
+
+    def strings_e (self, encoding, path):
+        u"""This is like the "g.strings" command, but allows you to
+        specify the encoding.
+        
+        See the strings(1) manpage for the full list of
+        encodings.
+        
+        Commonly useful encodings are "l" (lower case L) which
+        will show strings inside Windows/x86 files.
+        
+        The returned strings are transcoded to UTF-8.
+        
+        This function returns a list of strings.
+        
+        Because of the message protocol, there is a transfer
+        limit of somewhere between 2MB and 4MB. To transfer
+        large files you should use FTP.
+        """
+        return libguestfsmod.strings_e (self._o, encoding, path)
+
+    def hexdump (self, path):
+        u"""This runs "hexdump -C" on the given "path". The result
+        is the human-readable, canonical hex dump of the file.
+        
+        Because of the message protocol, there is a transfer
+        limit of somewhere between 2MB and 4MB. To transfer
+        large files you should use FTP.
+        """
+        return libguestfsmod.hexdump (self._o, path)
+