X-Git-Url: http://git.annexia.org/?a=blobdiff_plain;f=guestfish-actions.pod;h=04343af2d9bc33999664f8592de1f96811ddd8db;hb=cead6fe22d32e8fcdb26c60fdad5db49bf3f0ec0;hp=62688eed114a46fa588ee08c0377647ac2f91595;hpb=b03ee3675bed8d739ae722ed8c030ae02b3cb0ed;p=libguestfs.git

diff --git a/guestfish-actions.pod b/guestfish-actions.pod
index 62688ee..04343af 100644
--- a/guestfish-actions.pod
+++ b/guestfish-actions.pod
@@ -403,6 +403,20 @@ The first character of C<param> string must be a C<-> (dash).
 
 C<value> can be NULL.
 
+=head2 cp
+
+ cp src dest
+
+This copies a file from C<src> to C<dest> where C<dest> is
+either a destination filename or destination directory.
+
+=head2 cp-a
+
+ cp-a src dest
+
+This copies a file or directory from C<src> to C<dest>
+recursively using the C<cp -a> command.
+
 =head2 debug
 
  debug subcmd 'extraargs ...'
@@ -415,6 +429,19 @@ There is no comprehensive help for this command.  You have
 to look at the file C<daemon/debug.c> in the libguestfs source
 to find out what you can do.
 
+=head2 dmesg
+
+ dmesg
+
+This returns the kernel messages (C<dmesg> output) from
+the guest kernel.  This is sometimes useful for extended
+debugging of problems.
+
+Another way to get the same information is to enable
+verbose messages with C<set-verbose> or by setting
+the environment variable C<LIBGUESTFS_DEBUG=1> before
+running the program.
+
 =head2 download
 
  download remotefilename (filename|-)
@@ -428,6 +455,29 @@ See also C<upload>, C<cat>.
 
 Use C<-> instead of a filename to read/write from stdin/stdout.
 
+=head2 drop-caches
+
+ drop-caches whattodrop
+
+This instructs the guest kernel to drop its page cache,
+and/or dentries and inode caches.  The parameter C<whattodrop>
+tells the kernel what precisely to drop, see
+L<http://linux-mm.org/Drop_Caches>
+
+Setting C<whattodrop> to 3 should drop everything.
+
+This automatically calls L<sync(2)> before the operation,
+so that the maximum guest memory is freed.
+
+=head2 equal
+
+ equal file1 file2
+
+This compares the two files C<file1> and C<file2> and returns
+true if their content is exactly equal, or false otherwise.
+
+The external L<cmp(1)> program is used for the comparison.
+
 =head2 exists
 
  exists path
@@ -449,6 +499,38 @@ The exact command which runs is C<file -bsL path>.  Note in
 particular that the filename is not prepended to the output
 (the C<-b> option).
 
+=head2 fsck
+
+ fsck fstype device
+
+This runs the filesystem checker (fsck) on C<device> which
+should have filesystem type C<fstype>.
+
+The returned integer is the status.  See L<fsck(8)> for the
+list of status codes from C<fsck>.
+
+Notes:
+
+=over 4
+
+=item *
+
+Multiple status codes can be summed together.
+
+=item *
+
+A non-zero return code can mean "success", for example if
+errors have been corrected on the filesystem.
+
+=item *
+
+Checking or repairing NTFS volumes is not supported
+(by linux-ntfs).
+
+=back
+
+This command is entirely equivalent to running C<fsck -a -t fstype device>.
+
 =head2 get-autosync
 
  get-autosync
@@ -502,6 +584,24 @@ For more information on states, see L<guestfs(3)>.
 
 This returns the verbose messages flag.
 
+=head2 grub-install
+
+ grub-install root device
+
+This command installs GRUB (the Grand Unified Bootloader) on
+C<device>, with the root directory being C<root>.
+
+=head2 hexdump
+
+ hexdump path
+
+This runs C<hexdump -C> on the given C<path>.  The result is
+the human-readable, canonical hex dump of the file.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
 =head2 is-busy
 
  is-busy
@@ -690,7 +790,7 @@ as necessary.  This is like the C<mkdir -p> shell command.
  mkfs fstype device
 
 This creates a filesystem on C<device> (usually a partition
-of LVM logical volume).  The filesystem type is C<fstype>, for
+or LVM logical volume).  The filesystem type is C<fstype>, for
 example C<ext3>.
 
 =head2 mount
@@ -746,6 +846,22 @@ the list of devices (eg. C</dev/sda1>, C</dev/VG/LV>).
 
 Some internal mounts are not shown.
 
+=head2 mv
+
+ mv src dest
+
+This moves a file from C<src> to C<dest> where C<dest> is
+either a destination filename or destination directory.
+
+=head2 ping-daemon
+
+ ping-daemon
+
+This is a test probe into the guestfs daemon running inside
+the qemu subprocess.  Calling this function checks that the
+daemon responds to the ping message, without affecting the daemon
+or attached block device(s) in any other way.
+
 =head2 pvcreate
 
  pvcreate device
@@ -823,9 +939,13 @@ Remove the single directory C<path>.
  set-autosync true|false
 
 If C<autosync> is true, this enables autosync.  Libguestfs will make a
-best effort attempt to run C<sync> when the handle is closed
+best effort attempt to run C<umount-all> followed by
+C<sync> when the handle is closed
 (also if the program exits without closing handles).
 
+This is disabled by default (except in guestfish where it is
+enabled by default).
+
 =head2 set-e2label
 
  set-e2label device label
@@ -934,6 +1054,35 @@ C<path> should be a file or directory in the mounted file system
 
 This is the same as the C<statvfs(2)> system call.
 
+=head2 strings
+
+ strings path
+
+This runs the L<strings(1)> command on a file and returns
+the list of printable strings found.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
+=head2 strings-e
+
+ strings-e encoding path
+
+This is like the C<strings> command, but allows you to
+specify the encoding.
+
+See the L<strings(1)> manpage for the full list of encodings.
+
+Commonly useful encodings are C<l> (lower case L) which will
+show strings inside Windows/x86 files.
+
+The returned strings are transcoded to UTF-8.
+
+Because of the message protocol, there is a transfer limit 
+of somewhere between 2MB and 4MB.  To transfer large files you should use
+FTP.
+
 =head2 sync
 
  sync
@@ -1084,7 +1233,22 @@ As a special case, if C<size> is C<0>
 then the length is calculated using C<strlen> (so in this case
 the content cannot contain embedded ASCII NULs).
 
+I<NB.> Owing to a bug, writing content containing ASCII NUL
+characters does I<not> work, even if the length is specified.
+We hope to resolve this bug in a future version.  In the meantime
+use C<upload>.
+
 Because of the message protocol, there is a transfer limit 
 of somewhere between 2MB and 4MB.  To transfer large files you should use
 FTP.
 
+=head2 zero
+
+ zero device
+
+This command writes zeroes over the first few blocks of C<device>.
+
+How many blocks are zeroed isn't specified (but it's I<not> enough
+to securely wipe the device).  It should be sufficient to remove
+any partition tables, filesystem superblocks and so on.
+