from the physical machine's root filesystem. You should probably try
this method even though occasionally it does not work.
+=item Ask for fixed IP address and gateway
+
+In this mode the live CD will ask you for a fixed IP address and
+gateway address, and will configure your chosen interface with these.
+
=item Configure from the shell
In this mode you will be dropped into a command shell and you will
where C<AA.BB.CC.DD> is the IP address and C<GG.HH.II.JJ> is the
gateway.
+=item QEMU user network
+
+This option configures the network for use inside a QEMU user network
+(L<http://fabrice.bellard.free.fr/qemu/qemu-doc.html#SEC30>). It
+should only be used by developers.
+
=back
=item Devices
=item C<network>
-Set this to the choice for network setup. Use either C<Some Auto> or
-C<Some Shell> for auto-configuration or shell (manual) configuration
-respectively.
+Set this to the choice for network setup. Use one of:
+
+=over 4
+
+=item C<Some Auto>
+
+for auto-configuration
+
+=item C<Some Static>
+
+to specify the interface, address, netmask and gateway statically
+
+=item C<Some Shell>
+
+to launch a shell
+
+=item C<Some QEMUUserNet>
+
+to use a QEMU user network (developers only)
+
+=back
+
+=item C<static_network_config>
+
+This setting only applies if C<network> is set to C<Some Static>,
+in which case you should set this to the static network settings,
+a tuple of (interface, address, netmask, gateway, nameserver):
+
+ Some ("eth0", "192.168.2.5", "255.255.255.0", "192.168.2.1", "192.168.2.1")
=item C<hypervisor>