(* libguestfs
- * Copyright (C) 2009-2010 Red Hat Inc.
+ * Copyright (C) 2009-2011 Red Hat Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
]
let test_functions = [
- ("test0", (RErr, test_all_args), -1, [NotInFish; NotInDocs],
+ ("test0", (RErr, test_all_args, []), -1, [NotInFish; NotInDocs],
[],
"internal test function - do not use",
"\
] @ List.flatten (
List.map (
fun (name, ret) ->
- [(name, (ret, [String "val"]), -1, [NotInFish; NotInDocs],
+ [(name, (ret, [String "val"], []), -1, [NotInFish; NotInDocs],
[],
"internal test function - do not use",
"\
It converts string C<val> to the return type.
You probably don't want to call this function.");
- (name ^ "err", (ret, []), -1, [NotInFish; NotInDocs],
+ (name ^ "err", (ret, [], []), -1, [NotInFish; NotInDocs],
[],
"internal test function - do not use",
"\
*)
let non_daemon_functions = test_functions @ [
- ("launch", (RErr, []), -1, [FishAlias "run"],
+ ("launch", (RErr, [], []), -1, [FishAlias "run"; Progress],
[],
"launch the qemu subprocess",
"\
You should call this after configuring the handle
(eg. adding drives) but before performing any actions.");
- ("wait_ready", (RErr, []), -1, [NotInFish],
+ ("wait_ready", (RErr, [], []), -1, [NotInFish; DeprecatedBy "launch"],
[],
"wait until the qemu subprocess launches (no op)",
"\
remove them, unless you want to retain compatibility with older
versions of the API.");
- ("kill_subprocess", (RErr, []), -1, [],
+ ("kill_subprocess", (RErr, [], []), -1, [],
[],
"kill the qemu subprocess",
"\
This kills the qemu subprocess. You should never need to call this.");
- ("add_drive", (RErr, [String "filename"]), -1, [FishAlias "add"],
+ ("add_drive", (RErr, [String "filename"], []), -1, [],
[],
"add an image to examine or modify",
"\
-This function adds a virtual machine disk image C<filename> to the
-guest. The first time you call this function, the disk appears as IDE
-disk 0 (C</dev/sda>) in the guest, the second time as C</dev/sdb>, and
-so on.
-
-You don't necessarily need to be root when using libguestfs. However
-you obviously do need sufficient permissions to access the filename
-for whatever operations you want to perform (ie. read access if you
-just want to read the image or write access if you want to modify the
-image).
-
-This is equivalent to the qemu parameter
-C<-drive file=filename,cache=off,if=...>.
+This function is the equivalent of calling C<guestfs_add_drive_opts>
+with no optional parameters, so the disk is added writable, with
+the format being detected automatically.
-C<cache=off> is omitted in cases where it is not supported by
-the underlying filesystem.
+Automatic detection of the format opens you up to a potential
+security hole when dealing with untrusted raw-format images.
+See CVE-2010-3851 and RHBZ#642934. Specifying the format closes
+this security hole. Therefore you should think about replacing
+calls to this function with calls to C<guestfs_add_drive_opts>,
+and specifying the format.");
-C<if=...> is set at compile time by the configuration option
-C<./configure --with-drive-if=...>. In the rare case where you
-might need to change this at run time, use C<guestfs_add_drive_with_if>
-or C<guestfs_add_drive_ro_with_if>.
-
-Note that this call checks for the existence of C<filename>. This
-stops you from specifying other types of drive which are supported
-by qemu such as C<nbd:> and C<http:> URLs. To specify those, use
-the general C<guestfs_config> call instead.");
-
- ("add_cdrom", (RErr, [String "filename"]), -1, [FishAlias "cdrom"],
+ ("add_cdrom", (RErr, [String "filename"], []), -1, [DeprecatedBy "add_drive_opts"],
[],
"add a CD-ROM disk image to examine",
"\
This function adds a virtual CD-ROM disk image to the guest.
-This is equivalent to the qemu parameter C<-cdrom filename>.
+This is equivalent to the qemu parameter I<-cdrom filename>.
Notes:
=back");
- ("add_drive_ro", (RErr, [String "filename"]), -1, [FishAlias "add-ro"],
+ ("add_drive_ro", (RErr, [String "filename"], []), -1, [FishAlias "add-ro"],
[],
"add a drive in snapshot mode (read-only)",
"\
-This adds a drive in snapshot mode, making it effectively
-read-only.
-
-Note that writes to the device are allowed, and will be seen for
-the duration of the guestfs handle, but they are written
-to a temporary file which is discarded as soon as the guestfs
-handle is closed. We don't currently have any method to enable
-changes to be committed, although qemu can support this.
-
-This is equivalent to the qemu parameter
-C<-drive file=filename,snapshot=on,if=...>.
-
-C<if=...> is set at compile time by the configuration option
-C<./configure --with-drive-if=...>. In the rare case where you
-might need to change this at run time, use C<guestfs_add_drive_with_if>
-or C<guestfs_add_drive_ro_with_if>.
-
-Note that this call checks for the existence of C<filename>. This
-stops you from specifying other types of drive which are supported
-by qemu such as C<nbd:> and C<http:> URLs. To specify those, use
-the general C<guestfs_config> call instead.");
+This function is the equivalent of calling C<guestfs_add_drive_opts>
+with the optional parameter C<GUESTFS_ADD_DRIVE_OPTS_READONLY> set to 1,
+so the disk is added read-only, with the format being detected
+automatically.");
- ("config", (RErr, [String "qemuparam"; OptString "qemuvalue"]), -1, [],
+ ("config", (RErr, [String "qemuparam"; OptString "qemuvalue"], []), -1, [],
[],
"add qemu parameters",
"\
This can be used to add arbitrary qemu command line parameters
-of the form C<-param value>. Actually it's not quite arbitrary - we
+of the form I<-param value>. Actually it's not quite arbitrary - we
prevent you from setting some parameters which would interfere with
parameters that we use.
C<value> can be NULL.");
- ("set_qemu", (RErr, [OptString "qemu"]), -1, [FishAlias "qemu"],
+ ("set_qemu", (RErr, [OptString "qemu"], []), -1, [FishAlias "qemu"],
[],
"set the qemu binary",
"\
variable C<LIBGUESTFS_QEMU> is safest of all since that picks
the qemu binary at the same time as the handle is created.");
- ("get_qemu", (RConstString "qemu", []), -1, [],
+ ("get_qemu", (RConstString "qemu", [], []), -1, [],
[InitNone, Always, TestRun (
[["get_qemu"]])],
"get the qemu binary",
This is always non-NULL. If it wasn't set already, then this will
return the default qemu binary name.");
- ("set_path", (RErr, [OptString "searchpath"]), -1, [FishAlias "path"],
+ ("set_path", (RErr, [OptString "searchpath"], []), -1, [FishAlias "path"],
[],
"set the search path",
"\
Setting C<path> to C<NULL> restores the default path.");
- ("get_path", (RConstString "path", []), -1, [],
+ ("get_path", (RConstString "path", [], []), -1, [],
[InitNone, Always, TestRun (
[["get_path"]])],
"get the search path",
This is always non-NULL. If it wasn't set already, then this will
return the default path.");
- ("set_append", (RErr, [OptString "append"]), -1, [FishAlias "append"],
+ ("set_append", (RErr, [OptString "append"], []), -1, [FishAlias "append"],
[],
"add options to kernel command line",
"\
Setting C<append> to C<NULL> means I<no> additional options
are passed (libguestfs always adds a few of its own).");
- ("get_append", (RConstOptString "append", []), -1, [],
+ ("get_append", (RConstOptString "append", [], []), -1, [],
(* This cannot be tested with the current framework. The
* function can return NULL in normal operations, which the
* test framework interprets as an error.
If C<NULL> then no options are added.");
- ("set_autosync", (RErr, [Bool "autosync"]), -1, [FishAlias "autosync"],
+ ("set_autosync", (RErr, [Bool "autosync"], []), -1, [FishAlias "autosync"],
[],
"set autosync mode",
"\
If C<autosync> is true, this enables autosync. Libguestfs will make a
-best effort attempt to run C<guestfs_umount_all> followed by
-C<guestfs_sync> when the handle is closed
+best effort attempt to make filesystems consistent and synchronized
+when the handle is closed
(also if the program exits without closing handles).
-This is disabled by default (except in guestfish where it is
-enabled by default).");
+This is enabled by default (since libguestfs 1.5.24, previously it was
+disabled by default).");
- ("get_autosync", (RBool "autosync", []), -1, [],
- [InitNone, Always, TestRun (
+ ("get_autosync", (RBool "autosync", [], []), -1, [],
+ [InitNone, Always, TestOutputTrue (
[["get_autosync"]])],
"get autosync mode",
"\
Get the autosync flag.");
- ("set_verbose", (RErr, [Bool "verbose"]), -1, [FishAlias "verbose"],
+ ("set_verbose", (RErr, [Bool "verbose"], []), -1, [FishAlias "verbose"],
[],
"set verbose mode",
"\
-If C<verbose> is true, this turns on verbose messages (to C<stderr>).
+If C<verbose> is true, this turns on verbose messages.
Verbose messages are disabled unless the environment variable
-C<LIBGUESTFS_DEBUG> is defined and set to C<1>.");
+C<LIBGUESTFS_DEBUG> is defined and set to C<1>.
- ("get_verbose", (RBool "verbose", []), -1, [],
+Verbose messages are normally sent to C<stderr>, unless you
+register a callback to send them somewhere else (see
+C<guestfs_set_event_callback>).");
+
+ ("get_verbose", (RBool "verbose", [], []), -1, [],
[],
"get verbose mode",
"\
This returns the verbose messages flag.");
- ("is_ready", (RBool "ready", []), -1, [],
+ ("is_ready", (RBool "ready", [], []), -1, [],
[InitNone, Always, TestOutputTrue (
[["is_ready"]])],
"is ready to accept commands",
For more information on states, see L<guestfs(3)>.");
- ("is_config", (RBool "config", []), -1, [],
+ ("is_config", (RBool "config", [], []), -1, [],
[InitNone, Always, TestOutputFalse (
[["is_config"]])],
"is in configuration state",
For more information on states, see L<guestfs(3)>.");
- ("is_launching", (RBool "launching", []), -1, [],
+ ("is_launching", (RBool "launching", [], []), -1, [],
[InitNone, Always, TestOutputFalse (
[["is_launching"]])],
"is launching subprocess",
For more information on states, see L<guestfs(3)>.");
- ("is_busy", (RBool "busy", []), -1, [],
+ ("is_busy", (RBool "busy", [], []), -1, [],
[InitNone, Always, TestOutputFalse (
[["is_busy"]])],
"is busy processing a command",
For more information on states, see L<guestfs(3)>.");
- ("get_state", (RInt "state", []), -1, [],
+ ("get_state", (RInt "state", [], []), -1, [],
[],
"get the current state",
"\
For more information on states, see L<guestfs(3)>.");
- ("set_memsize", (RErr, [Int "memsize"]), -1, [FishAlias "memsize"],
+ ("set_memsize", (RErr, [Int "memsize"], []), -1, [FishAlias "memsize"],
[InitNone, Always, TestOutputInt (
[["set_memsize"; "500"];
["get_memsize"]], 500)],
For more information on the architecture of libguestfs,
see L<guestfs(3)>.");
- ("get_memsize", (RInt "memsize", []), -1, [],
+ ("get_memsize", (RInt "memsize", [], []), -1, [],
[InitNone, Always, TestOutputIntOp (
[["get_memsize"]], ">=", 256)],
"get memory allocated to the qemu subprocess",
For more information on the architecture of libguestfs,
see L<guestfs(3)>.");
- ("get_pid", (RInt "pid", []), -1, [FishAlias "pid"],
+ ("get_pid", (RInt "pid", [], []), -1, [FishAlias "pid"],
[InitNone, Always, TestOutputIntOp (
[["get_pid"]], ">=", 1)],
"get PID of qemu subprocess",
This is an internal call used for debugging and testing.");
- ("version", (RStruct ("version", "version"), []), -1, [],
+ ("version", (RStruct ("version", "version"), [], []), -1, [],
[InitNone, Always, TestOutputStruct (
[["version"]], [CompareWithInt ("major", 1)])],
"get the library version number",
making this an unreliable way to test for features.
Use C<guestfs_available> instead.");
- ("set_selinux", (RErr, [Bool "selinux"]), -1, [FishAlias "selinux"],
+ ("set_selinux", (RErr, [Bool "selinux"], []), -1, [FishAlias "selinux"],
[InitNone, Always, TestOutputTrue (
[["set_selinux"; "true"];
["get_selinux"]])],
For more information on the architecture of libguestfs,
see L<guestfs(3)>.");
- ("get_selinux", (RBool "selinux", []), -1, [],
+ ("get_selinux", (RBool "selinux", [], []), -1, [],
[],
"get SELinux enabled flag",
"\
For more information on the architecture of libguestfs,
see L<guestfs(3)>.");
- ("set_trace", (RErr, [Bool "trace"]), -1, [FishAlias "trace"],
+ ("set_trace", (RErr, [Bool "trace"], []), -1, [FishAlias "trace"],
[InitNone, Always, TestOutputFalse (
[["set_trace"; "false"];
["get_trace"]])],
"enable or disable command traces",
"\
-If the command trace flag is set to 1, then commands are
-printed on stderr before they are executed in a format
-which is very similar to the one used by guestfish. In
-other words, you can run a program with this enabled, and
-you will get out a script which you can feed to guestfish
-to perform the same set of actions.
+If the command trace flag is set to 1, then libguestfs
+calls, parameters and return values are traced.
If you want to trace C API calls into libguestfs (and
other libraries) then possibly a better way is to use
the external ltrace(1) command.
Command traces are disabled unless the environment variable
-C<LIBGUESTFS_TRACE> is defined and set to C<1>.");
+C<LIBGUESTFS_TRACE> is defined and set to C<1>.
+
+Trace messages are normally sent to C<stderr>, unless you
+register a callback to send them somewhere else (see
+C<guestfs_set_event_callback>).");
- ("get_trace", (RBool "trace", []), -1, [],
+ ("get_trace", (RBool "trace", [], []), -1, [],
[],
"get command trace enabled flag",
"\
Return the command trace flag.");
- ("set_direct", (RErr, [Bool "direct"]), -1, [FishAlias "direct"],
+ ("set_direct", (RErr, [Bool "direct"], []), -1, [FishAlias "direct"],
[InitNone, Always, TestOutputFalse (
[["set_direct"; "false"];
["get_direct"]])],
The default is disabled.");
- ("get_direct", (RBool "direct", []), -1, [],
+ ("get_direct", (RBool "direct", [], []), -1, [],
[],
"get direct appliance mode flag",
"\
Return the direct appliance mode flag.");
- ("set_recovery_proc", (RErr, [Bool "recoveryproc"]), -1, [FishAlias "recovery-proc"],
+ ("set_recovery_proc", (RErr, [Bool "recoveryproc"], []), -1, [FishAlias "recovery-proc"],
[InitNone, Always, TestOutputTrue (
[["set_recovery_proc"; "true"];
["get_recovery_proc"]])],
thinks that the main program has disappeared and so kills
qemu, which is not very helpful.");
- ("get_recovery_proc", (RBool "recoveryproc", []), -1, [],
+ ("get_recovery_proc", (RBool "recoveryproc", [], []), -1, [],
[],
"get recovery process enabled flag",
"\
Return the recovery process enabled flag.");
- ("add_drive_with_if", (RErr, [String "filename"; String "iface"]), -1, [],
+ ("add_drive_with_if", (RErr, [String "filename"; String "iface"], []), -1, [DeprecatedBy "add_drive_opts"],
[],
"add a drive specifying the QEMU block emulation to use",
"\
This is the same as C<guestfs_add_drive> but it allows you
to specify the QEMU interface emulation to use at run time.");
- ("add_drive_ro_with_if", (RErr, [String "filename"; String "iface"]), -1, [],
+ ("add_drive_ro_with_if", (RErr, [String "filename"; String "iface"], []), -1, [DeprecatedBy "add_drive_opts"],
[],
"add a drive read-only specifying the QEMU block emulation to use",
"\
This is the same as C<guestfs_add_drive_ro> but it allows you
to specify the QEMU interface emulation to use at run time.");
- ("file_architecture", (RString "arch", [Pathname "filename"]), -1, [],
+ ("file_architecture", (RString "arch", [Pathname "filename"], []), -1, [],
[InitISOFS, Always, TestOutput (
[["file_architecture"; "/bin-i586-dynamic"]], "i386");
InitISOFS, Always, TestOutput (
=back");
- ("inspect_os", (RStringList "roots", []), -1, [],
+ ("inspect_os", (RStringList "roots", [], []), -1, [],
[],
"inspect disk and return list of operating systems found",
"\
must do that first (supplying the necessary keys) if the
disk is encrypted.
-Please read L<guestfs(3)/INSPECTION> for more details.");
+Please read L<guestfs(3)/INSPECTION> for more details.
- ("inspect_get_type", (RString "name", [Device "root"]), -1, [],
+See also C<guestfs_list_filesystems>.");
+
+ ("inspect_get_type", (RString "name", [Device "root"], []), -1, [],
[],
"get type of inspected operating system",
"\
Any Microsoft Windows operating system.
+=item \"freebsd\"
+
+FreeBSD.
+
=item \"unknown\"
The operating system type could not be determined.
Please read L<guestfs(3)/INSPECTION> for more details.");
- ("inspect_get_arch", (RString "arch", [Device "root"]), -1, [],
+ ("inspect_get_arch", (RString "arch", [Device "root"], []), -1, [],
[],
"get architecture of inspected operating system",
"\
Please read L<guestfs(3)/INSPECTION> for more details.");
- ("inspect_get_distro", (RString "distro", [Device "root"]), -1, [],
+ ("inspect_get_distro", (RString "distro", [Device "root"], []), -1, [],
[],
"get distro of inspected operating system",
"\
=over 4
+=item \"archlinux\"
+
+Arch Linux.
+
+=item \"centos\"
+
+CentOS.
+
=item \"debian\"
-Debian or a Debian-derived distro such as Ubuntu.
+Debian.
=item \"fedora\"
Fedora.
+=item \"gentoo\"
+
+Gentoo.
+
+=item \"linuxmint\"
+
+Linux Mint.
+
+=item \"mandriva\"
+
+Mandriva.
+
+=item \"meego\"
+
+MeeGo.
+
+=item \"pardus\"
+
+Pardus.
+
=item \"redhat-based\"
Some Red Hat-derived distro.
=item \"rhel\"
-Red Hat Enterprise Linux and some derivatives.
+Red Hat Enterprise Linux.
-=item \"windows\"
+=item \"scientificlinux\"
-Windows does not have distributions. This string is
-returned if the OS type is Windows.
+Scientific Linux.
+
+=item \"slackware\"
+
+Slackware.
+
+=item \"ubuntu\"
+
+Ubuntu.
=item \"unknown\"
The distro could not be determined.
+=item \"windows\"
+
+Windows does not have distributions. This string is
+returned if the OS type is Windows.
+
=back
Future versions of libguestfs may return other strings here.
Please read L<guestfs(3)/INSPECTION> for more details.");
- ("inspect_get_major_version", (RInt "major", [Device "root"]), -1, [],
+ ("inspect_get_major_version", (RInt "major", [Device "root"], []), -1, [],
[],
"get major version of inspected operating system",
"\
Please read L<guestfs(3)/INSPECTION> for more details.");
- ("inspect_get_minor_version", (RInt "minor", [Device "root"]), -1, [],
+ ("inspect_get_minor_version", (RInt "minor", [Device "root"], []), -1, [],
[],
"get minor version of inspected operating system",
"\
Please read L<guestfs(3)/INSPECTION> for more details.
See also C<guestfs_inspect_get_major_version>.");
- ("inspect_get_product_name", (RString "product", [Device "root"]), -1, [],
+ ("inspect_get_product_name", (RString "product", [Device "root"], []), -1, [],
[],
"get product name of inspected operating system",
"\
Please read L<guestfs(3)/INSPECTION> for more details.");
- ("inspect_get_mountpoints", (RHashtable "mountpoints", [Device "root"]), -1, [],
+ ("inspect_get_mountpoints", (RHashtable "mountpoints", [Device "root"], []), -1, [],
[],
"get mountpoints of inspected operating system",
"\
associated with this operating system should be mounted.
Callers should note that this is at best an educated guess
made by reading configuration files such as C</etc/fstab>.
+I<In particular note> that this may return filesystems
+which are non-existent or not mountable and callers should
+be prepared to handle or ignore failures if they try to
+mount them.
Each element in the returned hashtable has a key which
is the path of the mountpoint (eg. C</boot>) and a value
Non-mounted devices such as swap devices are I<not>
returned in this list.
+For operating systems like Windows which still use drive
+letters, this call will only return an entry for the first
+drive \"mounted on\" C</>. For information about the
+mapping of drive letters to partitions, see
+C<guestfs_inspect_get_drive_mappings>.
+
Please read L<guestfs(3)/INSPECTION> for more details.
See also C<guestfs_inspect_get_filesystems>.");
- ("inspect_get_filesystems", (RStringList "filesystems", [Device "root"]), -1, [],
+ ("inspect_get_filesystems", (RStringList "filesystems", [Device "root"], []), -1, [],
[],
"get filesystems associated with inspected operating system",
"\
Please read L<guestfs(3)/INSPECTION> for more details.
See also C<guestfs_inspect_get_mountpoints>.");
- ("set_network", (RErr, [Bool "network"]), -1, [FishAlias "network"],
+ ("set_network", (RErr, [Bool "network"], []), -1, [FishAlias "network"],
[],
"set enable network flag",
"\
You must call this before calling C<guestfs_launch>, otherwise
it has no effect.");
- ("get_network", (RBool "network", []), -1, [],
+ ("get_network", (RBool "network", [], []), -1, [],
[],
"get enable network flag",
"\
This returns the enable network flag.");
+ ("list_filesystems", (RHashtable "fses", [], []), -1, [],
+ [],
+ "list filesystems",
+ "\
+This inspection command looks for filesystems on partitions,
+block devices and logical volumes, returning a list of devices
+containing filesystems and their type.
+
+The return value is a hash, where the keys are the devices
+containing filesystems, and the values are the filesystem types.
+For example:
+
+ \"/dev/sda1\" => \"ntfs\"
+ \"/dev/sda2\" => \"ext2\"
+ \"/dev/vg_guest/lv_root\" => \"ext4\"
+ \"/dev/vg_guest/lv_swap\" => \"swap\"
+
+The value can have the special value \"unknown\", meaning the
+content of the device is undetermined or empty.
+\"swap\" means a Linux swap partition.
+
+This command runs other libguestfs commands, which might include
+C<guestfs_mount> and C<guestfs_umount>, and therefore you should
+use this soon after launch and only when nothing is mounted.
+
+Not all of the filesystems returned will be mountable. In
+particular, swap partitions are returned in the list. Also
+this command does not check that each filesystem
+found is valid and mountable, and some filesystems might
+be mountable but require special options. Filesystems may
+not all belong to a single logical operating system
+(use C<guestfs_inspect_os> to look for OSes).");
+
+ ("add_drive_opts", (RErr, [String "filename"], [Bool "readonly"; String "format"; String "iface"]), -1, [FishAlias "add"],
+ [],
+ "add an image to examine or modify",
+ "\
+This function adds a virtual machine disk image C<filename> to
+libguestfs. The first time you call this function, the disk
+appears as C</dev/sda>, the second time as C</dev/sdb>, and
+so on.
+
+You don't necessarily need to be root when using libguestfs. However
+you obviously do need sufficient permissions to access the filename
+for whatever operations you want to perform (ie. read access if you
+just want to read the image or write access if you want to modify the
+image).
+
+This call checks that C<filename> exists.
+
+The optional arguments are:
+
+=over 4
+
+=item C<readonly>
+
+If true then the image is treated as read-only. Writes are still
+allowed, but they are stored in a temporary snapshot overlay which
+is discarded at the end. The disk that you add is not modified.
+
+=item C<format>
+
+This forces the image format. If you omit this (or use C<guestfs_add_drive>
+or C<guestfs_add_drive_ro>) then the format is automatically detected.
+Possible formats include C<raw> and C<qcow2>.
+
+Automatic detection of the format opens you up to a potential
+security hole when dealing with untrusted raw-format images.
+See CVE-2010-3851 and RHBZ#642934. Specifying the format closes
+this security hole.
+
+=item C<iface>
+
+This rarely-used option lets you emulate the behaviour of the
+deprecated C<guestfs_add_drive_with_if> call (q.v.)
+
+=back");
+
+ ("inspect_get_windows_systemroot", (RString "systemroot", [Device "root"], []), -1, [],
+ [],
+ "get Windows systemroot of inspected operating system",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+This returns the Windows systemroot of the inspected guest.
+The systemroot is a directory path such as C</WINDOWS>.
+
+This call assumes that the guest is Windows and that the
+systemroot could be determined by inspection. If this is not
+the case then an error is returned.
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("inspect_get_roots", (RStringList "roots", [], []), -1, [],
+ [],
+ "return list of operating systems found by last inspection",
+ "\
+This function is a convenient way to get the list of root
+devices, as returned from a previous call to C<guestfs_inspect_os>,
+but without redoing the whole inspection process.
+
+This returns an empty list if either no root devices were
+found or the caller has not called C<guestfs_inspect_os>.
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("debug_cmdline", (RStringList "cmdline", [], []), -1, [NotInDocs],
+ [],
+ "debug the QEMU command line (internal use only)",
+ "\
+This returns the internal QEMU command line. 'debug' commands are
+not part of the formal API and can be removed or changed at any time.");
+
+ ("add_domain", (RInt "nrdisks", [String "dom"], [String "libvirturi"; Bool "readonly"; String "iface"; Bool "live"]), -1, [FishAlias "domain"],
+ [],
+ "add the disk(s) from a named libvirt domain",
+ "\
+This function adds the disk(s) attached to the named libvirt
+domain C<dom>. It works by connecting to libvirt, requesting
+the domain and domain XML from libvirt, parsing it for disks,
+and calling C<guestfs_add_drive_opts> on each one.
+
+The number of disks added is returned. This operation is atomic:
+if an error is returned, then no disks are added.
+
+This function does some minimal checks to make sure the libvirt
+domain is not running (unless C<readonly> is true). In a future
+version we will try to acquire the libvirt lock on each disk.
+
+Disks must be accessible locally. This often means that adding disks
+from a remote libvirt connection (see L<http://libvirt.org/remote.html>)
+will fail unless those disks are accessible via the same device path
+locally too.
+
+The optional C<libvirturi> parameter sets the libvirt URI
+(see L<http://libvirt.org/uri.html>). If this is not set then
+we connect to the default libvirt URI (or one set through an
+environment variable, see the libvirt documentation for full
+details).
+
+The optional C<live> flag controls whether this call will try
+to connect to a running virtual machine C<guestfsd> process if
+it sees a suitable E<lt>channelE<gt> element in the libvirt
+XML definition. The default (if the flag is omitted) is never
+to try. See L<guestfs(3)/ATTACHING TO RUNNING DAEMONS> for more
+information.
+
+The other optional parameters are passed directly through to
+C<guestfs_add_drive_opts>.");
+
+(*
+This interface is not quite baked yet. -- RWMJ 2010-11-11
+ ("add_libvirt_dom", (RInt "nrdisks", [Pointer ("virDomainPtr", "dom")], [Bool "readonly"; String "iface"; Bool "live"]), -1, [NotInFish],
+ [],
+ "add the disk(s) from a libvirt domain",
+ "\
+This function adds the disk(s) attached to the libvirt domain C<dom>.
+It works by requesting the domain XML from libvirt, parsing it for
+disks, and calling C<guestfs_add_drive_opts> on each one.
+
+In the C API we declare C<void *dom>, but really it has type
+C<virDomainPtr dom>. This is so we don't need E<lt>libvirt.hE<gt>.
+
+The number of disks added is returned. This operation is atomic:
+if an error is returned, then no disks are added.
+
+This function does some minimal checks to make sure the libvirt
+domain is not running (unless C<readonly> is true). In a future
+version we will try to acquire the libvirt lock on each disk.
+
+Disks must be accessible locally. This often means that adding disks
+from a remote libvirt connection (see L<http://libvirt.org/remote.html>)
+will fail unless those disks are accessible via the same device path
+locally too.
+
+The optional C<live> flag controls whether this call will try
+to connect to a running virtual machine C<guestfsd> process if
+it sees a suitable E<lt>channelE<gt> element in the libvirt
+XML definition. The default (if the flag is omitted) is never
+to try. See L<guestfs(3)/ATTACHING TO RUNNING DAEMONS> for more
+information.
+
+The other optional parameters are passed directly through to
+C<guestfs_add_drive_opts>.");
+*)
+
+ ("inspect_get_package_format", (RString "packageformat", [Device "root"], []), -1, [],
+ [],
+ "get package format used by the operating system",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+This function and C<guestfs_inspect_get_package_management> return
+the package format and package management tool used by the
+inspected operating system. For example for Fedora these
+functions would return C<rpm> (package format) and
+C<yum> (package management).
+
+This returns the string C<unknown> if we could not determine the
+package format I<or> if the operating system does not have
+a real packaging system (eg. Windows).
+
+Possible strings include: C<rpm>, C<deb>, C<ebuild>, C<pisi>, C<pacman>.
+Future versions of libguestfs may return other strings.
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("inspect_get_package_management", (RString "packagemanagement", [Device "root"], []), -1, [],
+ [],
+ "get package management tool used by the operating system",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+C<guestfs_inspect_get_package_format> and this function return
+the package format and package management tool used by the
+inspected operating system. For example for Fedora these
+functions would return C<rpm> (package format) and
+C<yum> (package management).
+
+This returns the string C<unknown> if we could not determine the
+package management tool I<or> if the operating system does not have
+a real packaging system (eg. Windows).
+
+Possible strings include: C<yum>, C<up2date>,
+C<apt> (for all Debian derivatives),
+C<portage>, C<pisi>, C<pacman>, C<urpmi>.
+Future versions of libguestfs may return other strings.
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("inspect_list_applications", (RStructList ("applications", "application"), [Device "root"], []), -1, [],
+ [],
+ "get list of applications installed in the operating system",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+Return the list of applications installed in the operating system.
+
+I<Note:> This call works differently from other parts of the
+inspection API. You have to call C<guestfs_inspect_os>, then
+C<guestfs_inspect_get_mountpoints>, then mount up the disks,
+before calling this. Listing applications is a significantly
+more difficult operation which requires access to the full
+filesystem. Also note that unlike the other
+C<guestfs_inspect_get_*> calls which are just returning
+data cached in the libguestfs handle, this call actually reads
+parts of the mounted filesystems during the call.
+
+This returns an empty list if the inspection code was not able
+to determine the list of applications.
+
+The application structure contains the following fields:
+
+=over 4
+
+=item C<app_name>
+
+The name of the application. For Red Hat-derived and Debian-derived
+Linux guests, this is the package name.
+
+=item C<app_display_name>
+
+The display name of the application, sometimes localized to the
+install language of the guest operating system.
+
+If unavailable this is returned as an empty string C<\"\">.
+Callers needing to display something can use C<app_name> instead.
+
+=item C<app_epoch>
+
+For package managers which use epochs, this contains the epoch of
+the package (an integer). If unavailable, this is returned as C<0>.
+
+=item C<app_version>
+
+The version string of the application or package. If unavailable
+this is returned as an empty string C<\"\">.
+
+=item C<app_release>
+
+The release string of the application or package, for package
+managers that use this. If unavailable this is returned as an
+empty string C<\"\">.
+
+=item C<app_install_path>
+
+The installation path of the application (on operating systems
+such as Windows which use installation paths). This path is
+in the format used by the guest operating system, it is not
+a libguestfs path.
+
+If unavailable this is returned as an empty string C<\"\">.
+
+=item C<app_trans_path>
+
+The install path translated into a libguestfs path.
+If unavailable this is returned as an empty string C<\"\">.
+
+=item C<app_publisher>
+
+The name of the publisher of the application, for package
+managers that use this. If unavailable this is returned
+as an empty string C<\"\">.
+
+=item C<app_url>
+
+The URL (eg. upstream URL) of the application.
+If unavailable this is returned as an empty string C<\"\">.
+
+=item C<app_source_package>
+
+For packaging systems which support this, the name of the source
+package. If unavailable this is returned as an empty string C<\"\">.
+
+=item C<app_summary>
+
+A short (usually one line) description of the application or package.
+If unavailable this is returned as an empty string C<\"\">.
+
+=item C<app_description>
+
+A longer description of the application or package.
+If unavailable this is returned as an empty string C<\"\">.
+
+=back
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("inspect_get_hostname", (RString "hostname", [Device "root"], []), -1, [],
+ [],
+ "get hostname of the operating system",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+This function returns the hostname of the operating system
+as found by inspection of the guest's configuration files.
+
+If the hostname could not be determined, then the
+string C<unknown> is returned.
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("inspect_get_format", (RString "format", [Device "root"], []), -1, [],
+ [],
+ "get format of inspected operating system",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+This returns the format of the inspected operating system. You
+can use it to detect install images, live CDs and similar.
+
+Currently defined formats are:
+
+=over 4
+
+=item \"installed\"
+
+This is an installed operating system.
+
+=item \"installer\"
+
+The disk image being inspected is not an installed operating system,
+but a I<bootable> install disk, live CD, or similar.
+
+=item \"unknown\"
+
+The format of this disk image is not known.
+
+=back
+
+Future versions of libguestfs may return other strings here.
+The caller should be prepared to handle any string.
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("inspect_is_live", (RBool "live", [Device "root"], []), -1, [],
+ [],
+ "get live flag for install disk",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+If C<guestfs_inspect_get_format> returns C<installer> (this
+is an install disk), then this returns true if a live image
+was detected on the disk.
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("inspect_is_netinst", (RBool "netinst", [Device "root"], []), -1, [],
+ [],
+ "get netinst (network installer) flag for install disk",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+If C<guestfs_inspect_get_format> returns C<installer> (this
+is an install disk), then this returns true if the disk is
+a network installer, ie. not a self-contained install CD but
+one which is likely to require network access to complete
+the install.
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("inspect_is_multipart", (RBool "multipart", [Device "root"], []), -1, [],
+ [],
+ "get multipart flag for install disk",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+If C<guestfs_inspect_get_format> returns C<installer> (this
+is an install disk), then this returns true if the disk is
+part of a set.
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("set_attach_method", (RErr, [String "attachmethod"], []), -1, [FishAlias "attach-method"],
+ [],
+ "set the attach method",
+ "\
+Set the method that libguestfs uses to connect to the back end
+guestfsd daemon. Possible methods are:
+
+=over 4
+
+=item C<appliance>
+
+Launch an appliance and connect to it. This is the ordinary method
+and the default.
+
+=item C<unix:I<path>>
+
+Connect to the Unix domain socket I<path>.
+
+This method lets you connect to an existing daemon or (using
+virtio-serial) to a live guest. For more information, see
+L<guestfs(3)/ATTACHING TO RUNNING DAEMONS>.
+
+=back");
+
+ ("get_attach_method", (RString "attachmethod", [], []), -1, [],
+ [InitNone, Always, TestOutput (
+ [["get_attach_method"]], "appliance")],
+ "get the attach method",
+ "\
+Return the current attach method. See C<guestfs_set_attach_method>.");
+
+ ("inspect_get_product_variant", (RString "variant", [Device "root"], []), -1, [],
+ [],
+ "get product variant of inspected operating system",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+This returns the product variant of the inspected operating
+system.
+
+For Windows guests, this returns the contents of the Registry key
+C<HKLM\\Software\\Microsoft\\Windows NT\\CurrentVersion>
+C<InstallationType> which is usually a string such as
+C<Client> or C<Server> (other values are possible). This
+can be used to distinguish consumer and enterprise versions
+of Windows that have the same version number (for example,
+Windows 7 and Windows 2008 Server are both version 6.1,
+but the former is C<Client> and the latter is C<Server>).
+
+For enterprise Linux guests, in future we intend this to return
+the product variant such as C<Desktop>, C<Server> and so on. But
+this is not implemented at present.
+
+If the product variant could not be determined, then the
+string C<unknown> is returned.
+
+Please read L<guestfs(3)/INSPECTION> for more details.
+See also C<guestfs_inspect_get_product_name>,
+C<guestfs_inspect_get_major_version>.");
+
+ ("inspect_get_windows_current_control_set", (RString "controlset", [Device "root"], []), -1, [],
+ [],
+ "get Windows CurrentControlSet of inspected operating system",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+This returns the Windows CurrentControlSet of the inspected guest.
+The CurrentControlSet is a registry key name such as C<ControlSet001>.
+
+This call assumes that the guest is Windows and that the
+Registry could be examined by inspection. If this is not
+the case then an error is returned.
+
+Please read L<guestfs(3)/INSPECTION> for more details.");
+
+ ("inspect_get_drive_mappings", (RHashtable "drives", [Device "root"], []), -1, [],
+ [],
+ "get drive letter mappings",
+ "\
+This function should only be called with a root device string
+as returned by C<guestfs_inspect_os>.
+
+This call is useful for Windows which uses a primitive system
+of assigning drive letters (like \"C:\") to partitions.
+This inspection API examines the Windows Registry to find out
+how disks/partitions are mapped to drive letters, and returns
+a hash table as in the example below:
+
+ C => /dev/vda2
+ E => /dev/vdb1
+ F => /dev/vdc1
+
+Note that keys are drive letters. For Windows, the key is
+case insensitive and just contains the drive letter, without
+the customary colon separator character.
+
+In future we may support other operating systems that also used drive
+letters, but the keys for those might not be case insensitive
+and might be longer than 1 character. For example in OS-9,
+hard drives were named C<h0>, C<h1> etc.
+
+For Windows guests, currently only hard drive mappings are
+returned. Removable disks (eg. DVD-ROMs) are ignored.
+
+For guests that do not use drive mappings, or if the drive mappings
+could not be determined, this returns an empty hash table.
+
+Please read L<guestfs(3)/INSPECTION> for more details.
+See also C<guestfs_inspect_get_mountpoints>,
+C<guestfs_inspect_get_filesystems>.");
+
]
(* daemon_functions are any functions which cause some action
*)
let daemon_functions = [
- ("mount", (RErr, [Device "device"; String "mountpoint"]), 1, [],
+ ("mount", (RErr, [Device "device"; String "mountpoint"], []), 1, [DeprecatedBy "mount_options"],
[InitEmpty, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
use C<guestfs_mount_options> (use an empty string for the first
parameter if you don't want any options).");
- ("sync", (RErr, []), 2, [],
+ ("sync", (RErr, [], []), 2, [],
[ InitEmpty, Always, TestRun [["sync"]]],
"sync disks, writes are flushed through to the disk image",
"\
You should always call this if you have modified a disk image, before
closing the handle.");
- ("touch", (RErr, [Pathname "path"]), 3, [],
- [InitBasicFS, Always, TestOutputTrue (
- [["touch"; "/new"];
- ["exists"; "/new"]])],
+ ("touch", (RErr, [Pathname "path"], []), 3, [],
+ [InitScratchFS, Always, TestOutputTrue (
+ [["touch"; "/touch"];
+ ["exists"; "/touch"]])],
"update file timestamps or create a new file",
"\
Touch acts like the L<touch(1)> command. It can be used to
This command only works on regular files, and will fail on other
file types such as directories, symbolic links, block special etc.");
- ("cat", (RString "content", [Pathname "path"]), 4, [ProtocolLimitWarning],
+ ("cat", (RString "content", [Pathname "path"], []), 4, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutput (
[["cat"; "/known-2"]], "abcdef\n")],
"list the contents of a file",
as end of string). For those you need to use the C<guestfs_read_file>
or C<guestfs_download> functions which have a more complex interface.");
- ("ll", (RString "listing", [Pathname "directory"]), 5, [],
+ ("ll", (RString "listing", [Pathname "directory"], []), 5, [],
[], (* XXX Tricky to test because it depends on the exact format
* of the 'ls -l' command, which changes between F10 and F11.
*)
This command is mostly useful for interactive sessions. It
is I<not> intended that you try to parse the output string.");
- ("ls", (RStringList "listing", [Pathname "directory"]), 6, [],
- [InitBasicFS, Always, TestOutputList (
- [["touch"; "/new"];
- ["touch"; "/newer"];
- ["touch"; "/newest"];
- ["ls"; "/"]], ["lost+found"; "new"; "newer"; "newest"])],
+ ("ls", (RStringList "listing", [Pathname "directory"], []), 6, [],
+ [InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/ls"];
+ ["touch"; "/ls/new"];
+ ["touch"; "/ls/newer"];
+ ["touch"; "/ls/newest"];
+ ["ls"; "/ls"]], ["new"; "newer"; "newest"])],
"list the files in a directory",
"\
List the files in C<directory> (relative to the root directory,
This command is mostly useful for interactive sessions. Programs
should probably use C<guestfs_readdir> instead.");
- ("list_devices", (RStringList "devices", []), 7, [],
+ ("list_devices", (RStringList "devices", [], []), 7, [],
[InitEmpty, Always, TestOutputListOfDevices (
[["list_devices"]], ["/dev/sda"; "/dev/sdb"; "/dev/sdc"; "/dev/sdd"])],
"list the block devices",
"\
List all the block devices.
-The full block device names are returned, eg. C</dev/sda>");
+The full block device names are returned, eg. C</dev/sda>.
+
+See also C<guestfs_list_filesystems>.");
- ("list_partitions", (RStringList "partitions", []), 8, [],
+ ("list_partitions", (RStringList "partitions", [], []), 8, [],
[InitBasicFS, Always, TestOutputListOfDevices (
- [["list_partitions"]], ["/dev/sda1"]);
+ [["list_partitions"]], ["/dev/sda1"; "/dev/sdb1"]);
InitEmpty, Always, TestOutputListOfDevices (
- [["sfdiskM"; "/dev/sda"; ",100 ,200 ,"];
- ["list_partitions"]], ["/dev/sda1"; "/dev/sda2"; "/dev/sda3"])],
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "409599"];
+ ["part_add"; "/dev/sda"; "p"; "409600"; "-64"];
+ ["list_partitions"]], ["/dev/sda1"; "/dev/sda2"; "/dev/sda3"; "/dev/sdb1"])],
"list the partitions",
"\
List all the partitions detected on all block devices.
The full partition device names are returned, eg. C</dev/sda1>
This does not return logical volumes. For that you will need to
-call C<guestfs_lvs>.");
+call C<guestfs_lvs>.
+
+See also C<guestfs_list_filesystems>.");
- ("pvs", (RStringList "physvols", []), 9, [Optional "lvm2"],
+ ("pvs", (RStringList "physvols", [], []), 9, [Optional "lvm2"],
[InitBasicFSonLVM, Always, TestOutputListOfDevices (
[["pvs"]], ["/dev/sda1"]);
InitEmpty, Always, TestOutputListOfDevices (
- [["sfdiskM"; "/dev/sda"; ",100 ,200 ,"];
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "409599"];
+ ["part_add"; "/dev/sda"; "p"; "409600"; "-64"];
["pvcreate"; "/dev/sda1"];
["pvcreate"; "/dev/sda2"];
["pvcreate"; "/dev/sda3"];
See also C<guestfs_pvs_full>.");
- ("vgs", (RStringList "volgroups", []), 10, [Optional "lvm2"],
+ ("vgs", (RStringList "volgroups", [], []), 10, [Optional "lvm2"],
[InitBasicFSonLVM, Always, TestOutputList (
[["vgs"]], ["VG"]);
InitEmpty, Always, TestOutputList (
- [["sfdiskM"; "/dev/sda"; ",100 ,200 ,"];
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "409599"];
+ ["part_add"; "/dev/sda"; "p"; "409600"; "-64"];
["pvcreate"; "/dev/sda1"];
["pvcreate"; "/dev/sda2"];
["pvcreate"; "/dev/sda3"];
See also C<guestfs_vgs_full>.");
- ("lvs", (RStringList "logvols", []), 11, [Optional "lvm2"],
+ ("lvs", (RStringList "logvols", [], []), 11, [Optional "lvm2"],
[InitBasicFSonLVM, Always, TestOutputList (
[["lvs"]], ["/dev/VG/LV"]);
InitEmpty, Always, TestOutputList (
- [["sfdiskM"; "/dev/sda"; ",100 ,200 ,"];
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "409599"];
+ ["part_add"; "/dev/sda"; "p"; "409600"; "-64"];
["pvcreate"; "/dev/sda1"];
["pvcreate"; "/dev/sda2"];
["pvcreate"; "/dev/sda3"];
This returns a list of the logical volume device names
(eg. C</dev/VolGroup00/LogVol00>).
-See also C<guestfs_lvs_full>.");
+See also C<guestfs_lvs_full>, C<guestfs_list_filesystems>.");
- ("pvs_full", (RStructList ("physvols", "lvm_pv"), []), 12, [Optional "lvm2"],
+ ("pvs_full", (RStructList ("physvols", "lvm_pv"), [], []), 12, [Optional "lvm2"],
[], (* XXX how to test? *)
"list the LVM physical volumes (PVs)",
"\
List all the physical volumes detected. This is the equivalent
of the L<pvs(8)> command. The \"full\" version includes all fields.");
- ("vgs_full", (RStructList ("volgroups", "lvm_vg"), []), 13, [Optional "lvm2"],
+ ("vgs_full", (RStructList ("volgroups", "lvm_vg"), [], []), 13, [Optional "lvm2"],
[], (* XXX how to test? *)
"list the LVM volume groups (VGs)",
"\
List all the volumes groups detected. This is the equivalent
of the L<vgs(8)> command. The \"full\" version includes all fields.");
- ("lvs_full", (RStructList ("logvols", "lvm_lv"), []), 14, [Optional "lvm2"],
+ ("lvs_full", (RStructList ("logvols", "lvm_lv"), [], []), 14, [Optional "lvm2"],
[], (* XXX how to test? *)
"list the LVM logical volumes (LVs)",
"\
List all the logical volumes detected. This is the equivalent
of the L<lvs(8)> command. The \"full\" version includes all fields.");
- ("read_lines", (RStringList "lines", [Pathname "path"]), 15, [],
+ ("read_lines", (RStringList "lines", [Pathname "path"], []), 15, [],
[InitISOFS, Always, TestOutputList (
[["read_lines"; "/known-4"]], ["abc"; "def"; "ghi"]);
InitISOFS, Always, TestOutputList (
as end of line). For those you need to use the C<guestfs_read_file>
function which has a more complex interface.");
- ("aug_init", (RErr, [Pathname "root"; Int "flags"]), 16, [Optional "augeas"],
+ ("aug_init", (RErr, [Pathname "root"; Int "flags"], []), 16, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"create a new Augeas handle",
"\
To find out more about Augeas, see L<http://augeas.net/>.");
- ("aug_close", (RErr, []), 26, [Optional "augeas"],
+ ("aug_close", (RErr, [], []), 26, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"close the current Augeas handle",
"\
C<guestfs_aug_init> again before you can use any other
Augeas functions.");
- ("aug_defvar", (RInt "nrnodes", [String "name"; OptString "expr"]), 17, [Optional "augeas"],
+ ("aug_defvar", (RInt "nrnodes", [String "name"; OptString "expr"], []), 17, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"define an Augeas variable",
"\
On success this returns the number of nodes in C<expr>, or
C<0> if C<expr> evaluates to something which is not a nodeset.");
- ("aug_defnode", (RStruct ("nrnodescreated", "int_bool"), [String "name"; String "expr"; String "val"]), 18, [Optional "augeas"],
+ ("aug_defnode", (RStruct ("nrnodescreated", "int_bool"), [String "name"; String "expr"; String "val"], []), 18, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"define an Augeas node",
"\
number of nodes in the nodeset, and a boolean flag
if a node was created.");
- ("aug_get", (RString "val", [String "augpath"]), 19, [Optional "augeas"],
+ ("aug_get", (RString "val", [String "augpath"], []), 19, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"look up the value of an Augeas path",
"\
Look up the value associated with C<path>. If C<path>
matches exactly one node, the C<value> is returned.");
- ("aug_set", (RErr, [String "augpath"; String "val"]), 20, [Optional "augeas"],
+ ("aug_set", (RErr, [String "augpath"; String "val"], []), 20, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"set Augeas path to value",
"\
you cannot do that with this call. Instead you must use the
C<guestfs_aug_clear> call.");
- ("aug_insert", (RErr, [String "augpath"; String "label"; Bool "before"]), 21, [Optional "augeas"],
+ ("aug_insert", (RErr, [String "augpath"; String "label"; Bool "before"], []), 21, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"insert a sibling Augeas node",
"\
C<label> must be a label, ie. not contain C</>, C<*> or end
with a bracketed index C<[N]>.");
- ("aug_rm", (RInt "nrnodes", [String "augpath"]), 22, [Optional "augeas"],
+ ("aug_rm", (RInt "nrnodes", [String "augpath"], []), 22, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"remove an Augeas path",
"\
On success this returns the number of entries which were removed.");
- ("aug_mv", (RErr, [String "src"; String "dest"]), 23, [Optional "augeas"],
+ ("aug_mv", (RErr, [String "src"; String "dest"], []), 23, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"move Augeas node",
"\
Move the node C<src> to C<dest>. C<src> must match exactly
one node. C<dest> is overwritten if it exists.");
- ("aug_match", (RStringList "matches", [String "augpath"]), 24, [Optional "augeas"],
+ ("aug_match", (RStringList "matches", [String "augpath"], []), 24, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"return Augeas nodes which match augpath",
"\
The returned paths are sufficiently qualified so that they match
exactly one node in the current tree.");
- ("aug_save", (RErr, []), 25, [Optional "augeas"],
+ ("aug_save", (RErr, [], []), 25, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"write all pending Augeas changes to disk",
"\
The flags which were passed to C<guestfs_aug_init> affect exactly
how files are saved.");
- ("aug_load", (RErr, []), 27, [Optional "augeas"],
+ ("aug_load", (RErr, [], []), 27, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"load files into the tree",
"\
See C<aug_load> in the Augeas documentation for the full gory
details.");
- ("aug_ls", (RStringList "matches", [String "augpath"]), 28, [Optional "augeas"],
+ ("aug_ls", (RStringList "matches", [String "augpath"], []), 28, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"list Augeas nodes under augpath",
"\
This is just a shortcut for listing C<guestfs_aug_match>
C<path/*> and sorting the resulting nodes into alphabetical order.");
- ("rm", (RErr, [Pathname "path"]), 29, [],
- [InitBasicFS, Always, TestRun
- [["touch"; "/new"];
- ["rm"; "/new"]];
- InitBasicFS, Always, TestLastFail
- [["rm"; "/new"]];
- InitBasicFS, Always, TestLastFail
- [["mkdir"; "/new"];
- ["rm"; "/new"]]],
+ ("rm", (RErr, [Pathname "path"], []), 29, [],
+ [InitScratchFS, Always, TestRun
+ [["mkdir"; "/rm"];
+ ["touch"; "/rm/new"];
+ ["rm"; "/rm/new"]];
+ InitScratchFS, Always, TestLastFail
+ [["rm"; "/nosuchfile"]];
+ InitScratchFS, Always, TestLastFail
+ [["mkdir"; "/rm2"];
+ ["rm"; "/rm2"]]],
"remove a file",
"\
Remove the single file C<path>.");
- ("rmdir", (RErr, [Pathname "path"]), 30, [],
- [InitBasicFS, Always, TestRun
- [["mkdir"; "/new"];
- ["rmdir"; "/new"]];
- InitBasicFS, Always, TestLastFail
- [["rmdir"; "/new"]];
- InitBasicFS, Always, TestLastFail
- [["touch"; "/new"];
- ["rmdir"; "/new"]]],
+ ("rmdir", (RErr, [Pathname "path"], []), 30, [],
+ [InitScratchFS, Always, TestRun
+ [["mkdir"; "/rmdir"];
+ ["rmdir"; "/rmdir"]];
+ InitScratchFS, Always, TestLastFail
+ [["rmdir"; "/rmdir2"]];
+ InitScratchFS, Always, TestLastFail
+ [["mkdir"; "/rmdir3"];
+ ["touch"; "/rmdir3/new"];
+ ["rmdir"; "/rmdir3/new"]]],
"remove a directory",
"\
Remove the single directory C<path>.");
- ("rm_rf", (RErr, [Pathname "path"]), 31, [],
- [InitBasicFS, Always, TestOutputFalse
- [["mkdir"; "/new"];
- ["mkdir"; "/new/foo"];
- ["touch"; "/new/foo/bar"];
- ["rm_rf"; "/new"];
- ["exists"; "/new"]]],
+ ("rm_rf", (RErr, [Pathname "path"], []), 31, [],
+ [InitScratchFS, Always, TestOutputFalse
+ [["mkdir"; "/rm_rf"];
+ ["mkdir"; "/rm_rf/foo"];
+ ["touch"; "/rm_rf/foo/bar"];
+ ["rm_rf"; "/rm_rf"];
+ ["exists"; "/rm_rf"]]],
"remove a file or directory recursively",
"\
Remove the file or directory C<path>, recursively removing the
contents if its a directory. This is like the C<rm -rf> shell
command.");
- ("mkdir", (RErr, [Pathname "path"]), 32, [],
- [InitBasicFS, Always, TestOutputTrue
- [["mkdir"; "/new"];
- ["is_dir"; "/new"]];
- InitBasicFS, Always, TestLastFail
- [["mkdir"; "/new/foo/bar"]]],
+ ("mkdir", (RErr, [Pathname "path"], []), 32, [],
+ [InitScratchFS, Always, TestOutputTrue
+ [["mkdir"; "/mkdir"];
+ ["is_dir"; "/mkdir"]];
+ InitScratchFS, Always, TestLastFail
+ [["mkdir"; "/mkdir2/foo/bar"]]],
"create a directory",
"\
Create a directory named C<path>.");
- ("mkdir_p", (RErr, [Pathname "path"]), 33, [],
- [InitBasicFS, Always, TestOutputTrue
- [["mkdir_p"; "/new/foo/bar"];
- ["is_dir"; "/new/foo/bar"]];
- InitBasicFS, Always, TestOutputTrue
- [["mkdir_p"; "/new/foo/bar"];
- ["is_dir"; "/new/foo"]];
- InitBasicFS, Always, TestOutputTrue
- [["mkdir_p"; "/new/foo/bar"];
- ["is_dir"; "/new"]];
+ ("mkdir_p", (RErr, [Pathname "path"], []), 33, [],
+ [InitScratchFS, Always, TestOutputTrue
+ [["mkdir_p"; "/mkdir_p/foo/bar"];
+ ["is_dir"; "/mkdir_p/foo/bar"]];
+ InitScratchFS, Always, TestOutputTrue
+ [["mkdir_p"; "/mkdir_p2/foo/bar"];
+ ["is_dir"; "/mkdir_p2/foo"]];
+ InitScratchFS, Always, TestOutputTrue
+ [["mkdir_p"; "/mkdir_p3/foo/bar"];
+ ["is_dir"; "/mkdir_p3"]];
(* Regression tests for RHBZ#503133: *)
- InitBasicFS, Always, TestRun
- [["mkdir"; "/new"];
- ["mkdir_p"; "/new"]];
- InitBasicFS, Always, TestLastFail
- [["touch"; "/new"];
- ["mkdir_p"; "/new"]]],
+ InitScratchFS, Always, TestRun
+ [["mkdir"; "/mkdir_p4"];
+ ["mkdir_p"; "/mkdir_p4"]];
+ InitScratchFS, Always, TestLastFail
+ [["touch"; "/mkdir_p5"];
+ ["mkdir_p"; "/mkdir_p5"]]],
"create a directory and parents",
"\
Create a directory named C<path>, creating any parent directories
as necessary. This is like the C<mkdir -p> shell command.");
- ("chmod", (RErr, [Int "mode"; Pathname "path"]), 34, [],
+ ("chmod", (RErr, [Int "mode"; Pathname "path"], []), 34, [],
[], (* XXX Need stat command to test *)
"change file mode",
"\
The mode actually set is affected by the umask.");
- ("chown", (RErr, [Int "owner"; Int "group"; Pathname "path"]), 35, [],
+ ("chown", (RErr, [Int "owner"; Int "group"; Pathname "path"], []), 35, [],
[], (* XXX Need stat command to test *)
"change file owner and group",
"\
names, you will need to locate and parse the password file
yourself (Augeas support makes this relatively easy).");
- ("exists", (RBool "existsflag", [Pathname "path"]), 36, [],
+ ("exists", (RBool "existsflag", [Pathname "path"], []), 36, [],
[InitISOFS, Always, TestOutputTrue (
[["exists"; "/empty"]]);
InitISOFS, Always, TestOutputTrue (
See also C<guestfs_is_file>, C<guestfs_is_dir>, C<guestfs_stat>.");
- ("is_file", (RBool "fileflag", [Pathname "path"]), 37, [],
+ ("is_file", (RBool "fileflag", [Pathname "path"], []), 37, [],
[InitISOFS, Always, TestOutputTrue (
[["is_file"; "/known-1"]]);
InitISOFS, Always, TestOutputFalse (
See also C<guestfs_stat>.");
- ("is_dir", (RBool "dirflag", [Pathname "path"]), 38, [],
+ ("is_dir", (RBool "dirflag", [Pathname "path"], []), 38, [],
[InitISOFS, Always, TestOutputFalse (
[["is_dir"; "/known-3"]]);
InitISOFS, Always, TestOutputTrue (
See also C<guestfs_stat>.");
- ("pvcreate", (RErr, [Device "device"]), 39, [Optional "lvm2"],
+ ("pvcreate", (RErr, [Device "device"], []), 39, [Optional "lvm2"],
[InitEmpty, Always, TestOutputListOfDevices (
- [["sfdiskM"; "/dev/sda"; ",100 ,200 ,"];
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "409599"];
+ ["part_add"; "/dev/sda"; "p"; "409600"; "-64"];
["pvcreate"; "/dev/sda1"];
["pvcreate"; "/dev/sda2"];
["pvcreate"; "/dev/sda3"];
where C<device> should usually be a partition name such
as C</dev/sda1>.");
- ("vgcreate", (RErr, [String "volgroup"; DeviceList "physvols"]), 40, [Optional "lvm2"],
+ ("vgcreate", (RErr, [String "volgroup"; DeviceList "physvols"], []), 40, [Optional "lvm2"],
[InitEmpty, Always, TestOutputList (
- [["sfdiskM"; "/dev/sda"; ",100 ,200 ,"];
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "409599"];
+ ["part_add"; "/dev/sda"; "p"; "409600"; "-64"];
["pvcreate"; "/dev/sda1"];
["pvcreate"; "/dev/sda2"];
["pvcreate"; "/dev/sda3"];
This creates an LVM volume group called C<volgroup>
from the non-empty list of physical volumes C<physvols>.");
- ("lvcreate", (RErr, [String "logvol"; String "volgroup"; Int "mbytes"]), 41, [Optional "lvm2"],
+ ("lvcreate", (RErr, [String "logvol"; String "volgroup"; Int "mbytes"], []), 41, [Optional "lvm2"],
[InitEmpty, Always, TestOutputList (
- [["sfdiskM"; "/dev/sda"; ",100 ,200 ,"];
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "409599"];
+ ["part_add"; "/dev/sda"; "p"; "409600"; "-64"];
["pvcreate"; "/dev/sda1"];
["pvcreate"; "/dev/sda2"];
["pvcreate"; "/dev/sda3"];
This creates an LVM logical volume called C<logvol>
on the volume group C<volgroup>, with C<size> megabytes.");
- ("mkfs", (RErr, [String "fstype"; Device "device"]), 42, [],
+ ("mkfs", (RErr, [String "fstype"; Device "device"], []), 42, [],
[InitEmpty, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
("sfdisk", (RErr, [Device "device";
Int "cyls"; Int "heads"; Int "sectors";
- StringList "lines"]), 43, [DangerWillRobinson],
+ StringList "lines"], []), 43, [DangerWillRobinson; DeprecatedBy "part_add"],
[],
"create partitions on a block device",
"\
See also: C<guestfs_sfdisk_l>, C<guestfs_sfdisk_N>,
C<guestfs_part_init>");
- ("write_file", (RErr, [Pathname "path"; String "content"; Int "size"]), 44, [ProtocolLimitWarning; DeprecatedBy "write"],
+ ("write_file", (RErr, [Pathname "path"; String "content"; Int "size"], []), 44, [ProtocolLimitWarning; DeprecatedBy "write"],
(* Regression test for RHBZ#597135. *)
- [InitBasicFS, Always, TestLastFail
- [["write_file"; "/new"; "abc"; "10000"]]],
+ [InitScratchFS, Always, TestLastFail
+ [["write_file"; "/write_file"; "abc"; "10000"]]],
"create a file",
"\
This call creates a file called C<path>. The contents of the
I<NB.> Owing to a bug, writing content containing ASCII NUL
characters does I<not> work, even if the length is specified.");
- ("umount", (RErr, [String "pathordevice"]), 45, [FishAlias "unmount"],
+ ("umount", (RErr, [String "pathordevice"], []), 45, [FishAlias "unmount"],
[InitEmpty, Always, TestOutputListOfDevices (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext2"; "/dev/sda1"];
specified either by its mountpoint (path) or the device which
contains the filesystem.");
- ("mounts", (RStringList "devices", []), 46, [],
- [InitBasicFS, Always, TestOutputListOfDevices (
- [["mounts"]], ["/dev/sda1"])],
+ ("mounts", (RStringList "devices", [], []), 46, [],
+ [InitScratchFS, Always, TestOutputListOfDevices (
+ [["mounts"]], ["/dev/sdb1"])],
"show mounted filesystems",
"\
This returns the list of currently mounted filesystems. It returns
See also: C<guestfs_mountpoints>");
- ("umount_all", (RErr, []), 47, [FishAlias "unmount-all"],
- [InitBasicFS, Always, TestOutputList (
+ ("umount_all", (RErr, [], []), 47, [FishAlias "unmount-all"],
+ [InitScratchFS, Always, TestOutputList (
[["umount_all"];
["mounts"]], []);
(* check that umount_all can unmount nested mounts correctly: *)
InitEmpty, Always, TestOutputList (
- [["sfdiskM"; "/dev/sda"; ",100 ,200 ,"];
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "409599"];
+ ["part_add"; "/dev/sda"; "p"; "409600"; "-64"];
["mkfs"; "ext2"; "/dev/sda1"];
["mkfs"; "ext2"; "/dev/sda2"];
["mkfs"; "ext2"; "/dev/sda3"];
Some internal mounts are not unmounted by this call.");
- ("lvm_remove_all", (RErr, []), 48, [DangerWillRobinson; Optional "lvm2"],
+ ("lvm_remove_all", (RErr, [], []), 48, [DangerWillRobinson; Optional "lvm2"],
[],
"remove all LVM LVs, VGs and PVs",
"\
This command removes all LVM logical volumes, volume groups
and physical volumes.");
- ("file", (RString "description", [Dev_or_Path "path"]), 49, [],
+ ("file", (RString "description", [Dev_or_Path "path"], []), 49, [],
[InitISOFS, Always, TestOutput (
[["file"; "/empty"]], "empty");
InitISOFS, Always, TestOutput (
The exact command which runs is C<file -zb path>. Note in
particular that the filename is not prepended to the output
-(the C<-b> option).
-
-This command can also be used on C</dev/> devices
-(and partitions, LV names). You can for example use this
-to determine if a device contains a filesystem, although
-it's usually better to use C<guestfs_vfs_type>.
-
-If the C<path> does not begin with C</dev/> then
-this command only works for the content of regular files.
-For other file types (directory, symbolic link etc) it
-will just return the string C<directory> etc.");
-
- ("command", (RString "output", [StringList "arguments"]), 50, [ProtocolLimitWarning],
- [InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 1"]], "Result1");
- InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 2"]], "Result2\n");
- InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 3"]], "\nResult3");
- InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 4"]], "\nResult4\n");
- InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 5"]], "\nResult5\n\n");
- InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 6"]], "\n\nResult6\n\n");
- InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 7"]], "");
- InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 8"]], "\n");
- InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 9"]], "\n\n");
- InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 10"]], "Result10-1\nResult10-2\n");
- InitBasicFS, Always, TestOutput (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command 11"]], "Result11-1\nResult11-2");
- InitBasicFS, Always, TestLastFail (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command"; "/test-command"]])],
+(the I<-b> option).
+
+The output depends on the output of the underlying L<file(1)>
+command and it can change in future in ways beyond our control.
+In other words, the output is not guaranteed by the ABI.
+
+See also: L<file(1)>, C<guestfs_vfs_type>, C<guestfs_lstat>,
+C<guestfs_is_file>, C<guestfs_is_blockdev> (etc).");
+
+ ("command", (RString "output", [StringList "arguments"], []), 50, [ProtocolLimitWarning],
+ [InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command"];
+ ["upload"; "test-command"; "/command/test-command"];
+ ["chmod"; "0o755"; "/command/test-command"];
+ ["command"; "/command/test-command 1"]], "Result1");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command2"];
+ ["upload"; "test-command"; "/command2/test-command"];
+ ["chmod"; "0o755"; "/command2/test-command"];
+ ["command"; "/command2/test-command 2"]], "Result2\n");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command3"];
+ ["upload"; "test-command"; "/command3/test-command"];
+ ["chmod"; "0o755"; "/command3/test-command"];
+ ["command"; "/command3/test-command 3"]], "\nResult3");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command4"];
+ ["upload"; "test-command"; "/command4/test-command"];
+ ["chmod"; "0o755"; "/command4/test-command"];
+ ["command"; "/command4/test-command 4"]], "\nResult4\n");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command5"];
+ ["upload"; "test-command"; "/command5/test-command"];
+ ["chmod"; "0o755"; "/command5/test-command"];
+ ["command"; "/command5/test-command 5"]], "\nResult5\n\n");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command6"];
+ ["upload"; "test-command"; "/command6/test-command"];
+ ["chmod"; "0o755"; "/command6/test-command"];
+ ["command"; "/command6/test-command 6"]], "\n\nResult6\n\n");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command7"];
+ ["upload"; "test-command"; "/command7/test-command"];
+ ["chmod"; "0o755"; "/command7/test-command"];
+ ["command"; "/command7/test-command 7"]], "");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command8"];
+ ["upload"; "test-command"; "/command8/test-command"];
+ ["chmod"; "0o755"; "/command8/test-command"];
+ ["command"; "/command8/test-command 8"]], "\n");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command9"];
+ ["upload"; "test-command"; "/command9/test-command"];
+ ["chmod"; "0o755"; "/command9/test-command"];
+ ["command"; "/command9/test-command 9"]], "\n\n");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command10"];
+ ["upload"; "test-command"; "/command10/test-command"];
+ ["chmod"; "0o755"; "/command10/test-command"];
+ ["command"; "/command10/test-command 10"]], "Result10-1\nResult10-2\n");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/command11"];
+ ["upload"; "test-command"; "/command11/test-command"];
+ ["chmod"; "0o755"; "/command11/test-command"];
+ ["command"; "/command11/test-command 11"]], "Result11-1\nResult11-2");
+ InitScratchFS, Always, TestLastFail (
+ [["mkdir"; "/command12"];
+ ["upload"; "test-command"; "/command12/test-command"];
+ ["chmod"; "0o755"; "/command12/test-command"];
+ ["command"; "/command12/test-command"]])],
"run a command from the guest filesystem",
"\
This call runs a command from the guest filesystem. The
all filesystems that are needed are mounted at the right
locations.");
- ("command_lines", (RStringList "lines", [StringList "arguments"]), 51, [ProtocolLimitWarning],
- [InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 1"]], ["Result1"]);
- InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 2"]], ["Result2"]);
- InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 3"]], ["";"Result3"]);
- InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 4"]], ["";"Result4"]);
- InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 5"]], ["";"Result5";""]);
- InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 6"]], ["";"";"Result6";""]);
- InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 7"]], []);
- InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 8"]], [""]);
- InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 9"]], ["";""]);
- InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 10"]], ["Result10-1";"Result10-2"]);
- InitBasicFS, Always, TestOutputList (
- [["upload"; "test-command"; "/test-command"];
- ["chmod"; "0o755"; "/test-command"];
- ["command_lines"; "/test-command 11"]], ["Result11-1";"Result11-2"])],
+ ("command_lines", (RStringList "lines", [StringList "arguments"], []), 51, [ProtocolLimitWarning],
+ [InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines"];
+ ["upload"; "test-command"; "/command_lines/test-command"];
+ ["chmod"; "0o755"; "/command_lines/test-command"];
+ ["command_lines"; "/command_lines/test-command 1"]], ["Result1"]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines2"];
+ ["upload"; "test-command"; "/command_lines2/test-command"];
+ ["chmod"; "0o755"; "/command_lines2/test-command"];
+ ["command_lines"; "/command_lines2/test-command 2"]], ["Result2"]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines3"];
+ ["upload"; "test-command"; "/command_lines3/test-command"];
+ ["chmod"; "0o755"; "/command_lines3/test-command"];
+ ["command_lines"; "/command_lines3/test-command 3"]], ["";"Result3"]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines4"];
+ ["upload"; "test-command"; "/command_lines4/test-command"];
+ ["chmod"; "0o755"; "/command_lines4/test-command"];
+ ["command_lines"; "/command_lines4/test-command 4"]], ["";"Result4"]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines5"];
+ ["upload"; "test-command"; "/command_lines5/test-command"];
+ ["chmod"; "0o755"; "/command_lines5/test-command"];
+ ["command_lines"; "/command_lines5/test-command 5"]], ["";"Result5";""]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines6"];
+ ["upload"; "test-command"; "/command_lines6/test-command"];
+ ["chmod"; "0o755"; "/command_lines6/test-command"];
+ ["command_lines"; "/command_lines6/test-command 6"]], ["";"";"Result6";""]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines7"];
+ ["upload"; "test-command"; "/command_lines7/test-command"];
+ ["chmod"; "0o755"; "/command_lines7/test-command"];
+ ["command_lines"; "/command_lines7/test-command 7"]], []);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines8"];
+ ["upload"; "test-command"; "/command_lines8/test-command"];
+ ["chmod"; "0o755"; "/command_lines8/test-command"];
+ ["command_lines"; "/command_lines8/test-command 8"]], [""]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines9"];
+ ["upload"; "test-command"; "/command_lines9/test-command"];
+ ["chmod"; "0o755"; "/command_lines9/test-command"];
+ ["command_lines"; "/command_lines9/test-command 9"]], ["";""]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines10"];
+ ["upload"; "test-command"; "/command_lines10/test-command"];
+ ["chmod"; "0o755"; "/command_lines10/test-command"];
+ ["command_lines"; "/command_lines10/test-command 10"]], ["Result10-1";"Result10-2"]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/command_lines11"];
+ ["upload"; "test-command"; "/command_lines11/test-command"];
+ ["chmod"; "0o755"; "/command_lines11/test-command"];
+ ["command_lines"; "/command_lines11/test-command 11"]], ["Result11-1";"Result11-2"])],
"run a command, returning lines",
"\
This is the same as C<guestfs_command>, but splits the
See also: C<guestfs_sh_lines>");
- ("stat", (RStruct ("statbuf", "stat"), [Pathname "path"]), 52, [],
+ ("stat", (RStruct ("statbuf", "stat"), [Pathname "path"], []), 52, [],
[InitISOFS, Always, TestOutputStruct (
[["stat"; "/empty"]], [CompareWithInt ("size", 0)])],
"get file information",
This is the same as the C<stat(2)> system call.");
- ("lstat", (RStruct ("statbuf", "stat"), [Pathname "path"]), 53, [],
+ ("lstat", (RStruct ("statbuf", "stat"), [Pathname "path"], []), 53, [],
[InitISOFS, Always, TestOutputStruct (
[["lstat"; "/empty"]], [CompareWithInt ("size", 0)])],
"get file information for a symbolic link",
This is the same as the C<lstat(2)> system call.");
- ("statvfs", (RStruct ("statbuf", "statvfs"), [Pathname "path"]), 54, [],
+ ("statvfs", (RStruct ("statbuf", "statvfs"), [Pathname "path"], []), 54, [],
[InitISOFS, Always, TestOutputStruct (
[["statvfs"; "/"]], [CompareWithInt ("namemax", 255)])],
"get file system statistics",
This is the same as the C<statvfs(2)> system call.");
- ("tune2fs_l", (RHashtable "superblock", [Device "device"]), 55, [],
+ ("tune2fs_l", (RHashtable "superblock", [Device "device"], []), 55, [],
[], (* XXX test *)
"get ext2/ext3/ext4 superblock details",
"\
clearly defined, and depends on both the version of C<tune2fs>
that libguestfs was built against, and the filesystem itself.");
- ("blockdev_setro", (RErr, [Device "device"]), 56, [],
+ ("blockdev_setro", (RErr, [Device "device"], []), 56, [],
[InitEmpty, Always, TestOutputTrue (
[["blockdev_setro"; "/dev/sda"];
["blockdev_getro"; "/dev/sda"]])],
This uses the L<blockdev(8)> command.");
- ("blockdev_setrw", (RErr, [Device "device"]), 57, [],
+ ("blockdev_setrw", (RErr, [Device "device"], []), 57, [],
[InitEmpty, Always, TestOutputFalse (
[["blockdev_setrw"; "/dev/sda"];
["blockdev_getro"; "/dev/sda"]])],
This uses the L<blockdev(8)> command.");
- ("blockdev_getro", (RBool "ro", [Device "device"]), 58, [],
+ ("blockdev_getro", (RBool "ro", [Device "device"], []), 58, [],
[InitEmpty, Always, TestOutputTrue (
[["blockdev_setro"; "/dev/sda"];
["blockdev_getro"; "/dev/sda"]])],
This uses the L<blockdev(8)> command.");
- ("blockdev_getss", (RInt "sectorsize", [Device "device"]), 59, [],
+ ("blockdev_getss", (RInt "sectorsize", [Device "device"], []), 59, [],
[InitEmpty, Always, TestOutputInt (
[["blockdev_getss"; "/dev/sda"]], 512)],
"get sectorsize of block device",
This uses the L<blockdev(8)> command.");
- ("blockdev_getbsz", (RInt "blocksize", [Device "device"]), 60, [],
+ ("blockdev_getbsz", (RInt "blocksize", [Device "device"], []), 60, [],
[InitEmpty, Always, TestOutputInt (
[["blockdev_getbsz"; "/dev/sda"]], 4096)],
"get blocksize of block device",
This uses the L<blockdev(8)> command.");
- ("blockdev_setbsz", (RErr, [Device "device"; Int "blocksize"]), 61, [],
+ ("blockdev_setbsz", (RErr, [Device "device"; Int "blocksize"], []), 61, [],
[], (* XXX test *)
"set blocksize of block device",
"\
This uses the L<blockdev(8)> command.");
- ("blockdev_getsz", (RInt64 "sizeinsectors", [Device "device"]), 62, [],
+ ("blockdev_getsz", (RInt64 "sizeinsectors", [Device "device"], []), 62, [],
[InitEmpty, Always, TestOutputInt (
[["blockdev_getsz"; "/dev/sda"]], 1024000)],
"get total size of device in 512-byte sectors",
This uses the L<blockdev(8)> command.");
- ("blockdev_getsize64", (RInt64 "sizeinbytes", [Device "device"]), 63, [],
+ ("blockdev_getsize64", (RInt64 "sizeinbytes", [Device "device"], []), 63, [],
[InitEmpty, Always, TestOutputInt (
[["blockdev_getsize64"; "/dev/sda"]], 524288000)],
"get total size of device in bytes",
This uses the L<blockdev(8)> command.");
- ("blockdev_flushbufs", (RErr, [Device "device"]), 64, [],
+ ("blockdev_flushbufs", (RErr, [Device "device"], []), 64, [],
[InitEmpty, Always, TestRun
[["blockdev_flushbufs"; "/dev/sda"]]],
"flush device buffers",
This uses the L<blockdev(8)> command.");
- ("blockdev_rereadpt", (RErr, [Device "device"]), 65, [],
+ ("blockdev_rereadpt", (RErr, [Device "device"], []), 65, [],
[InitEmpty, Always, TestRun
[["blockdev_rereadpt"; "/dev/sda"]]],
"reread partition table",
This uses the L<blockdev(8)> command.");
- ("upload", (RErr, [FileIn "filename"; Dev_or_Path "remotefilename"]), 66, [],
- [InitBasicFS, Always, TestOutput (
+ ("upload", (RErr, [FileIn "filename"; Dev_or_Path "remotefilename"], []), 66, [Progress],
+ [InitScratchFS, Always, TestOutput (
(* Pick a file from cwd which isn't likely to change. *)
- [["upload"; "../COPYING.LIB"; "/COPYING.LIB"];
- ["checksum"; "md5"; "/COPYING.LIB"]],
+ [["mkdir"; "/upload"];
+ ["upload"; "../COPYING.LIB"; "/upload/COPYING.LIB"];
+ ["checksum"; "md5"; "/upload/COPYING.LIB"]],
Digest.to_hex (Digest.file "COPYING.LIB"))],
"upload a file from the local machine",
"\
See also C<guestfs_download>.");
- ("download", (RErr, [Dev_or_Path "remotefilename"; FileOut "filename"]), 67, [Progress],
- [InitBasicFS, Always, TestOutput (
+ ("download", (RErr, [Dev_or_Path "remotefilename"; FileOut "filename"], []), 67, [Progress],
+ [InitScratchFS, Always, TestOutput (
(* Pick a file from cwd which isn't likely to change. *)
- [["upload"; "../COPYING.LIB"; "/COPYING.LIB"];
- ["download"; "/COPYING.LIB"; "testdownload.tmp"];
- ["upload"; "testdownload.tmp"; "/upload"];
- ["checksum"; "md5"; "/upload"]],
+ [["mkdir"; "/download"];
+ ["upload"; "../COPYING.LIB"; "/download/COPYING.LIB"];
+ ["download"; "/download/COPYING.LIB"; "testdownload.tmp"];
+ ["upload"; "testdownload.tmp"; "/download/upload"];
+ ["checksum"; "md5"; "/download/upload"]],
Digest.to_hex (Digest.file "COPYING.LIB"))],
"download a file to the local machine",
"\
See also C<guestfs_upload>, C<guestfs_cat>.");
- ("checksum", (RString "checksum", [String "csumtype"; Pathname "path"]), 68, [],
+ ("checksum", (RString "checksum", [String "csumtype"; Pathname "path"], []), 68, [],
[InitISOFS, Always, TestOutput (
[["checksum"; "crc"; "/known-3"]], "2891671662");
InitISOFS, Always, TestLastFail (
To get the checksums for many files, use C<guestfs_checksums_out>.");
- ("tar_in", (RErr, [FileIn "tarfile"; Pathname "directory"]), 69, [],
- [InitBasicFS, Always, TestOutput (
- [["tar_in"; "../images/helloworld.tar"; "/"];
- ["cat"; "/hello"]], "hello\n")],
+ ("tar_in", (RErr, [FileIn "tarfile"; Pathname "directory"], []), 69, [],
+ [InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/tar_in"];
+ ["tar_in"; "../images/helloworld.tar"; "/tar_in"];
+ ["cat"; "/tar_in/hello"]], "hello\n")],
"unpack tarfile to directory",
"\
This command uploads and unpacks local file C<tarfile> (an
To upload a compressed tarball, use C<guestfs_tgz_in>
or C<guestfs_txz_in>.");
- ("tar_out", (RErr, [String "directory"; FileOut "tarfile"]), 70, [],
+ ("tar_out", (RErr, [String "directory"; FileOut "tarfile"], []), 70, [],
[],
"pack directory into tarfile",
"\
To download a compressed tarball, use C<guestfs_tgz_out>
or C<guestfs_txz_out>.");
- ("tgz_in", (RErr, [FileIn "tarball"; Pathname "directory"]), 71, [],
- [InitBasicFS, Always, TestOutput (
- [["tgz_in"; "../images/helloworld.tar.gz"; "/"];
- ["cat"; "/hello"]], "hello\n")],
+ ("tgz_in", (RErr, [FileIn "tarball"; Pathname "directory"], []), 71, [],
+ [InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/tgz_in"];
+ ["tgz_in"; "../images/helloworld.tar.gz"; "/tgz_in"];
+ ["cat"; "/tgz_in/hello"]], "hello\n")],
"unpack compressed tarball to directory",
"\
This command uploads and unpacks local file C<tarball> (a
To upload an uncompressed tarball, use C<guestfs_tar_in>.");
- ("tgz_out", (RErr, [Pathname "directory"; FileOut "tarball"]), 72, [],
+ ("tgz_out", (RErr, [Pathname "directory"; FileOut "tarball"], []), 72, [],
[],
"pack directory into compressed tarball",
"\
To download an uncompressed tarball, use C<guestfs_tar_out>.");
- ("mount_ro", (RErr, [Device "device"; String "mountpoint"]), 73, [],
+ ("mount_ro", (RErr, [Device "device"; String "mountpoint"], []), 73, [],
[InitBasicFS, Always, TestLastFail (
[["umount"; "/"];
["mount_ro"; "/dev/sda1"; "/"];
This is the same as the C<guestfs_mount> command, but it
mounts the filesystem with the read-only (I<-o ro>) flag.");
- ("mount_options", (RErr, [String "options"; Device "device"; String "mountpoint"]), 74, [],
+ ("mount_options", (RErr, [String "options"; Device "device"; String "mountpoint"], []), 74, [],
[],
"mount a guest disk with mount options",
"\
no options are passed (all options default to whatever
the filesystem uses).");
- ("mount_vfs", (RErr, [String "options"; String "vfstype"; Device "device"; String "mountpoint"]), 75, [],
+ ("mount_vfs", (RErr, [String "options"; String "vfstype"; Device "device"; String "mountpoint"], []), 75, [],
[],
"mount a guest disk with mount options and vfstype",
"\
allows you to set both the mount options and the vfstype
as for the L<mount(8)> I<-o> and I<-t> flags.");
- ("debug", (RString "result", [String "subcmd"; StringList "extraargs"]), 76, [],
+ ("debug", (RString "result", [String "subcmd"; StringList "extraargs"], []), 76, [NotInDocs],
[],
"debugging and internals",
"\
to look at the file C<daemon/debug.c> in the libguestfs source
to find out what you can do.");
- ("lvremove", (RErr, [Device "device"]), 77, [Optional "lvm2"],
+ ("lvremove", (RErr, [Device "device"], []), 77, [Optional "lvm2"],
[InitEmpty, Always, TestOutputList (
[["part_disk"; "/dev/sda"; "mbr"];
["pvcreate"; "/dev/sda1"];
You can also remove all LVs in a volume group by specifying
the VG name, C</dev/VG>.");
- ("vgremove", (RErr, [String "vgname"]), 78, [Optional "lvm2"],
+ ("vgremove", (RErr, [String "vgname"], []), 78, [Optional "lvm2"],
[InitEmpty, Always, TestOutputList (
[["part_disk"; "/dev/sda"; "mbr"];
["pvcreate"; "/dev/sda1"];
This also forcibly removes all logical volumes in the volume
group (if any).");
- ("pvremove", (RErr, [Device "device"]), 79, [Optional "lvm2"],
+ ("pvremove", (RErr, [Device "device"], []), 79, [Optional "lvm2"],
[InitEmpty, Always, TestOutputListOfDevices (
[["part_disk"; "/dev/sda"; "mbr"];
["pvcreate"; "/dev/sda1"];
wipe physical volumes that contain any volume groups, so you have
to remove those first.");
- ("set_e2label", (RErr, [Device "device"; String "label"]), 80, [],
+ ("set_e2label", (RErr, [Device "device"; String "label"], []), 80, [],
[InitBasicFS, Always, TestOutput (
[["set_e2label"; "/dev/sda1"; "testlabel"];
["get_e2label"; "/dev/sda1"]], "testlabel")],
You can use either C<guestfs_tune2fs_l> or C<guestfs_get_e2label>
to return the existing label on a filesystem.");
- ("get_e2label", (RString "label", [Device "device"]), 81, [DeprecatedBy "vfs_label"],
+ ("get_e2label", (RString "label", [Device "device"], []), 81, [DeprecatedBy "vfs_label"],
[],
"get the ext2/3/4 filesystem label",
"\
This returns the ext2/3/4 filesystem label of the filesystem on
C<device>.");
- ("set_e2uuid", (RErr, [Device "device"; String "uuid"]), 82, [],
+ ("set_e2uuid", (RErr, [Device "device"; String "uuid"], []), 82, [],
(let uuid = uuidgen () in
[InitBasicFS, Always, TestOutput (
[["set_e2uuid"; "/dev/sda1"; uuid];
You can use either C<guestfs_tune2fs_l> or C<guestfs_get_e2uuid>
to return the existing UUID of a filesystem.");
- ("get_e2uuid", (RString "uuid", [Device "device"]), 83, [DeprecatedBy "vfs_uuid"],
+ ("get_e2uuid", (RString "uuid", [Device "device"], []), 83, [DeprecatedBy "vfs_uuid"],
(* Regression test for RHBZ#597112. *)
(let uuid = uuidgen () in
- [InitBasicFS, Always, TestOutput (
- [["mke2journal"; "1024"; "/dev/sdb"];
- ["set_e2uuid"; "/dev/sdb"; uuid];
- ["get_e2uuid"; "/dev/sdb"]], uuid)]),
+ [InitNone, Always, TestOutput (
+ [["mke2journal"; "1024"; "/dev/sdc"];
+ ["set_e2uuid"; "/dev/sdc"; uuid];
+ ["get_e2uuid"; "/dev/sdc"]], uuid)]),
"get the ext2/3/4 filesystem UUID",
"\
This returns the ext2/3/4 filesystem UUID of the filesystem on
C<device>.");
- ("fsck", (RInt "status", [String "fstype"; Device "device"]), 84, [FishOutput FishOutputHexadecimal],
+ ("fsck", (RInt "status", [String "fstype"; Device "device"], []), 84, [FishOutput FishOutputHexadecimal],
[InitBasicFS, Always, TestOutputInt (
[["umount"; "/dev/sda1"];
["fsck"; "ext2"; "/dev/sda1"]], 0);
This command is entirely equivalent to running C<fsck -a -t fstype device>.");
- ("zero", (RErr, [Device "device"]), 85, [Progress],
- [InitBasicFS, Always, TestOutput (
+ ("zero", (RErr, [Device "device"], []), 85, [Progress],
+ [InitBasicFS, Always, TestRun (
[["umount"; "/dev/sda1"];
- ["zero"; "/dev/sda1"];
- ["file"; "/dev/sda1"]], "data")],
+ ["zero"; "/dev/sda1"]])],
"write zeroes to the device",
"\
This command writes zeroes over the first few blocks of C<device>.
See also: C<guestfs_zero_device>, C<guestfs_scrub_device>.");
- ("grub_install", (RErr, [Pathname "root"; Device "device"]), 86, [],
+ ("grub_install", (RErr, [Pathname "root"; Device "device"], []), 86, [],
(* See:
* https://bugzilla.redhat.com/show_bug.cgi?id=484986
* https://bugzilla.redhat.com/show_bug.cgi?id=479760
replacing C</dev/vda> with the name of the installation device.");
- ("cp", (RErr, [Pathname "src"; Pathname "dest"]), 87, [],
- [InitBasicFS, Always, TestOutput (
- [["write"; "/old"; "file content"];
- ["cp"; "/old"; "/new"];
- ["cat"; "/new"]], "file content");
- InitBasicFS, Always, TestOutputTrue (
- [["write"; "/old"; "file content"];
- ["cp"; "/old"; "/new"];
- ["is_file"; "/old"]]);
- InitBasicFS, Always, TestOutput (
- [["write"; "/old"; "file content"];
- ["mkdir"; "/dir"];
- ["cp"; "/old"; "/dir/new"];
- ["cat"; "/dir/new"]], "file content")],
+ ("cp", (RErr, [Pathname "src"; Pathname "dest"], []), 87, [],
+ [InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/cp"];
+ ["write"; "/cp/old"; "file content"];
+ ["cp"; "/cp/old"; "/cp/new"];
+ ["cat"; "/cp/new"]], "file content");
+ InitScratchFS, Always, TestOutputTrue (
+ [["mkdir"; "/cp2"];
+ ["write"; "/cp2/old"; "file content"];
+ ["cp"; "/cp2/old"; "/cp2/new"];
+ ["is_file"; "/cp2/old"]]);
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/cp3"];
+ ["write"; "/cp3/old"; "file content"];
+ ["mkdir"; "/cp3/dir"];
+ ["cp"; "/cp3/old"; "/cp3/dir/new"];
+ ["cat"; "/cp3/dir/new"]], "file content")],
"copy a file",
"\
This copies a file from C<src> to C<dest> where C<dest> is
either a destination filename or destination directory.");
- ("cp_a", (RErr, [Pathname "src"; Pathname "dest"]), 88, [],
- [InitBasicFS, Always, TestOutput (
- [["mkdir"; "/olddir"];
- ["mkdir"; "/newdir"];
- ["write"; "/olddir/file"; "file content"];
- ["cp_a"; "/olddir"; "/newdir"];
- ["cat"; "/newdir/olddir/file"]], "file content")],
+ ("cp_a", (RErr, [Pathname "src"; Pathname "dest"], []), 88, [],
+ [InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/cp_a1"];
+ ["mkdir"; "/cp_a2"];
+ ["write"; "/cp_a1/file"; "file content"];
+ ["cp_a"; "/cp_a1"; "/cp_a2"];
+ ["cat"; "/cp_a2/cp_a1/file"]], "file content")],
"copy a file or directory recursively",
"\
This copies a file or directory from C<src> to C<dest>
recursively using the C<cp -a> command.");
- ("mv", (RErr, [Pathname "src"; Pathname "dest"]), 89, [],
- [InitBasicFS, Always, TestOutput (
- [["write"; "/old"; "file content"];
- ["mv"; "/old"; "/new"];
- ["cat"; "/new"]], "file content");
- InitBasicFS, Always, TestOutputFalse (
- [["write"; "/old"; "file content"];
- ["mv"; "/old"; "/new"];
- ["is_file"; "/old"]])],
+ ("mv", (RErr, [Pathname "src"; Pathname "dest"], []), 89, [],
+ [InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/mv"];
+ ["write"; "/mv/old"; "file content"];
+ ["mv"; "/mv/old"; "/mv/new"];
+ ["cat"; "/mv/new"]], "file content");
+ InitScratchFS, Always, TestOutputFalse (
+ [["mkdir"; "/mv2"];
+ ["write"; "/mv2/old"; "file content"];
+ ["mv"; "/mv2/old"; "/mv2/new"];
+ ["is_file"; "/mv2/old"]])],
"move a file",
"\
This moves a file from C<src> to C<dest> where C<dest> is
either a destination filename or destination directory.");
- ("drop_caches", (RErr, [Int "whattodrop"]), 90, [],
+ ("drop_caches", (RErr, [Int "whattodrop"], []), 90, [],
[InitEmpty, Always, TestRun (
[["drop_caches"; "3"]])],
"drop kernel page cache, dentries and inodes",
This automatically calls L<sync(2)> before the operation,
so that the maximum guest memory is freed.");
- ("dmesg", (RString "kmsgs", []), 91, [],
+ ("dmesg", (RString "kmsgs", [], []), 91, [],
[InitEmpty, Always, TestRun (
[["dmesg"]])],
"return kernel messages",
the environment variable C<LIBGUESTFS_DEBUG=1> before
running the program.");
- ("ping_daemon", (RErr, []), 92, [],
+ ("ping_daemon", (RErr, [], []), 92, [],
[InitEmpty, Always, TestRun (
[["ping_daemon"]])],
"ping the guest daemon",
daemon responds to the ping message, without affecting the daemon
or attached block device(s) in any other way.");
- ("equal", (RBool "equality", [Pathname "file1"; Pathname "file2"]), 93, [],
- [InitBasicFS, Always, TestOutputTrue (
- [["write"; "/file1"; "contents of a file"];
- ["cp"; "/file1"; "/file2"];
- ["equal"; "/file1"; "/file2"]]);
- InitBasicFS, Always, TestOutputFalse (
- [["write"; "/file1"; "contents of a file"];
- ["write"; "/file2"; "contents of another file"];
- ["equal"; "/file1"; "/file2"]]);
- InitBasicFS, Always, TestLastFail (
- [["equal"; "/file1"; "/file2"]])],
+ ("equal", (RBool "equality", [Pathname "file1"; Pathname "file2"], []), 93, [],
+ [InitScratchFS, Always, TestOutputTrue (
+ [["mkdir"; "/equal"];
+ ["write"; "/equal/file1"; "contents of a file"];
+ ["cp"; "/equal/file1"; "/equal/file2"];
+ ["equal"; "/equal/file1"; "/equal/file2"]]);
+ InitScratchFS, Always, TestOutputFalse (
+ [["mkdir"; "/equal2"];
+ ["write"; "/equal2/file1"; "contents of a file"];
+ ["write"; "/equal2/file2"; "contents of another file"];
+ ["equal"; "/equal2/file1"; "/equal2/file2"]]);
+ InitScratchFS, Always, TestLastFail (
+ [["mkdir"; "/equal3"];
+ ["equal"; "/equal3/file1"; "/equal3/file2"]])],
"test if two files have equal contents",
"\
This compares the two files C<file1> and C<file2> and returns
The external L<cmp(1)> program is used for the comparison.");
- ("strings", (RStringList "stringsout", [Pathname "path"]), 94, [ProtocolLimitWarning],
+ ("strings", (RStringList "stringsout", [Pathname "path"], []), 94, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["strings"; "/known-5"]], ["abcdefghi"; "jklmnopqr"]);
InitISOFS, Always, TestOutputList (
This runs the L<strings(1)> command on a file and returns
the list of printable strings found.");
- ("strings_e", (RStringList "stringsout", [String "encoding"; Pathname "path"]), 95, [ProtocolLimitWarning],
+ ("strings_e", (RStringList "stringsout", [String "encoding"; Pathname "path"], []), 95, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["strings_e"; "b"; "/known-5"]], []);
- InitBasicFS, Always, TestOutputList (
- [["write"; "/new"; "\000h\000e\000l\000l\000o\000\n\000w\000o\000r\000l\000d\000\n"];
- ["strings_e"; "b"; "/new"]], ["hello"; "world"])],
+ InitScratchFS, Always, TestOutputList (
+ [["write"; "/strings_e"; "\000h\000e\000l\000l\000o\000\n\000w\000o\000r\000l\000d\000\n"];
+ ["strings_e"; "b"; "/strings_e"]], ["hello"; "world"])],
"print the printable strings in a file",
"\
This is like the C<guestfs_strings> command, but allows you to
The returned strings are transcoded to UTF-8.");
- ("hexdump", (RString "dump", [Pathname "path"]), 96, [ProtocolLimitWarning],
+ ("hexdump", (RString "dump", [Pathname "path"], []), 96, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutput (
[["hexdump"; "/known-4"]], "00000000 61 62 63 0a 64 65 66 0a 67 68 69 |abc.def.ghi|\n0000000b\n");
(* Test for RHBZ#501888c2 regression which caused large hexdump
This runs C<hexdump -C> on the given C<path>. The result is
the human-readable, canonical hex dump of the file.");
- ("zerofree", (RErr, [Device "device"]), 97, [Optional "zerofree"],
+ ("zerofree", (RErr, [Device "device"], []), 97, [Optional "zerofree"],
[InitNone, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ext3"; "/dev/sda1"];
It is possible that using this program can damage the filesystem
or data on the filesystem.");
- ("pvresize", (RErr, [Device "device"]), 98, [Optional "lvm2"],
+ ("pvresize", (RErr, [Device "device"], []), 98, [Optional "lvm2"],
[],
"resize an LVM physical volume",
"\
("sfdisk_N", (RErr, [Device "device"; Int "partnum";
Int "cyls"; Int "heads"; Int "sectors";
- String "line"]), 99, [DangerWillRobinson],
+ String "line"], []), 99, [DangerWillRobinson; DeprecatedBy "part_add"],
[],
"modify a single partition on a block device",
"\
See also: C<guestfs_part_add>");
- ("sfdisk_l", (RString "partitions", [Device "device"]), 100, [],
+ ("sfdisk_l", (RString "partitions", [Device "device"], []), 100, [DeprecatedBy "part_list"],
[],
"display the partition table",
"\
See also: C<guestfs_part_list>");
- ("sfdisk_kernel_geometry", (RString "partitions", [Device "device"]), 101, [],
+ ("sfdisk_kernel_geometry", (RString "partitions", [Device "device"], []), 101, [],
[],
"display the kernel geometry",
"\
The result is in human-readable format, and not designed to
be parsed.");
- ("sfdisk_disk_geometry", (RString "partitions", [Device "device"]), 102, [],
+ ("sfdisk_disk_geometry", (RString "partitions", [Device "device"], []), 102, [],
[],
"display the disk geometry from the partition table",
"\
The result is in human-readable format, and not designed to
be parsed.");
- ("vg_activate_all", (RErr, [Bool "activate"]), 103, [Optional "lvm2"],
+ ("vg_activate_all", (RErr, [Bool "activate"], []), 103, [Optional "lvm2"],
[],
"activate or deactivate all volume groups",
"\
This command is the same as running C<vgchange -a y|n>");
- ("vg_activate", (RErr, [Bool "activate"; StringList "volgroups"]), 104, [Optional "lvm2"],
+ ("vg_activate", (RErr, [Bool "activate"; StringList "volgroups"], []), 104, [Optional "lvm2"],
[],
"activate or deactivate some volume groups",
"\
Note that if C<volgroups> is an empty list then B<all> volume groups
are activated or deactivated.");
- ("lvresize", (RErr, [Device "device"; Int "mbytes"]), 105, [Optional "lvm2"],
+ ("lvresize", (RErr, [Device "device"; Int "mbytes"], []), 105, [Optional "lvm2"],
[InitNone, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["pvcreate"; "/dev/sda1"];
volume to C<mbytes>. When reducing, data in the reduced part
is lost.");
- ("resize2fs", (RErr, [Device "device"]), 106, [],
+ ("resize2fs", (RErr, [Device "device"], []), 106, [],
[], (* lvresize tests this *)
"resize an ext2, ext3 or ext4 filesystem",
"\
In any case, it is always safe to call C<guestfs_e2fsck_f> before
calling this function.");
- ("find", (RStringList "names", [Pathname "directory"]), 107, [ProtocolLimitWarning],
+ ("find", (RStringList "names", [Pathname "directory"], []), 107, [ProtocolLimitWarning],
[InitBasicFS, Always, TestOutputList (
[["find"; "/"]], ["lost+found"]);
InitBasicFS, Always, TestOutputList (
["mkdir"; "/b"];
["touch"; "/b/c"];
["find"; "/"]], ["a"; "b"; "b/c"; "lost+found"]);
- InitBasicFS, Always, TestOutputList (
- [["mkdir_p"; "/a/b/c"];
- ["touch"; "/a/b/c/d"];
- ["find"; "/a/b/"]], ["c"; "c/d"])],
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir_p"; "/find/b/c"];
+ ["touch"; "/find/b/c/d"];
+ ["find"; "/find/b/"]], ["c"; "c/d"])],
"find all files and directories",
"\
This command lists out all files and directories, recursively,
See also C<guestfs_find0>.");
- ("e2fsck_f", (RErr, [Device "device"]), 108, [],
+ ("e2fsck_f", (RErr, [Device "device"], []), 108, [],
[], (* lvresize tests this *)
"check an ext2/ext3 filesystem",
"\
This runs C<e2fsck -p -f device>, ie. runs the ext2/ext3
-filesystem checker on C<device>, noninteractively (C<-p>),
-even if the filesystem appears to be clean (C<-f>).
+filesystem checker on C<device>, noninteractively (I<-p>),
+even if the filesystem appears to be clean (I<-f>).
This command is only needed because of C<guestfs_resize2fs>
(q.v.). Normally you should use C<guestfs_fsck>.");
- ("sleep", (RErr, [Int "secs"]), 109, [],
+ ("sleep", (RErr, [Int "secs"], []), 109, [],
[InitNone, Always, TestRun (
[["sleep"; "1"]])],
"sleep for some seconds",
"\
Sleep for C<secs> seconds.");
- ("ntfs_3g_probe", (RInt "status", [Bool "rw"; Device "device"]), 110, [Optional "ntfs3g"],
+ ("ntfs_3g_probe", (RInt "status", [Bool "rw"; Device "device"], []), 110, [Optional "ntfs3g"],
[InitNone, Always, TestOutputInt (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs"; "ntfs"; "/dev/sda1"];
would succeed, or some non-zero value documented in the
L<ntfs-3g.probe(8)> manual page.");
- ("sh", (RString "output", [String "command"]), 111, [],
+ ("sh", (RString "output", [String "command"], []), 111, [],
[], (* XXX needs tests *)
"run a command via the shell",
"\
All the provisos about C<guestfs_command> apply to this call.");
- ("sh_lines", (RStringList "lines", [String "command"]), 112, [],
+ ("sh_lines", (RStringList "lines", [String "command"], []), 112, [],
[], (* XXX needs tests *)
"run a command via the shell returning lines",
"\
See also: C<guestfs_command_lines>");
- ("glob_expand", (RStringList "paths", [Pathname "pattern"]), 113, [],
+ ("glob_expand", (RStringList "paths", [Pathname "pattern"], []), 113, [],
(* Use Pathname here, and hence ABS_PATH (pattern,... in generated
* code in stubs.c, since all valid glob patterns must start with "/".
* There is no concept of "cwd" in libguestfs, hence no "."-relative names.
*)
- [InitBasicFS, Always, TestOutputList (
- [["mkdir_p"; "/a/b/c"];
- ["touch"; "/a/b/c/d"];
- ["touch"; "/a/b/c/e"];
- ["glob_expand"; "/a/b/c/*"]], ["/a/b/c/d"; "/a/b/c/e"]);
- InitBasicFS, Always, TestOutputList (
- [["mkdir_p"; "/a/b/c"];
- ["touch"; "/a/b/c/d"];
- ["touch"; "/a/b/c/e"];
- ["glob_expand"; "/a/*/c/*"]], ["/a/b/c/d"; "/a/b/c/e"]);
- InitBasicFS, Always, TestOutputList (
- [["mkdir_p"; "/a/b/c"];
- ["touch"; "/a/b/c/d"];
- ["touch"; "/a/b/c/e"];
- ["glob_expand"; "/a/*/x/*"]], [])],
+ [InitScratchFS, Always, TestOutputList (
+ [["mkdir_p"; "/glob_expand/b/c"];
+ ["touch"; "/glob_expand/b/c/d"];
+ ["touch"; "/glob_expand/b/c/e"];
+ ["glob_expand"; "/glob_expand/b/c/*"]], ["/glob_expand/b/c/d"; "/glob_expand/b/c/e"]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir_p"; "/glob_expand2/b/c"];
+ ["touch"; "/glob_expand2/b/c/d"];
+ ["touch"; "/glob_expand2/b/c/e"];
+ ["glob_expand"; "/glob_expand2/*/c/*"]], ["/glob_expand2/b/c/d"; "/glob_expand2/b/c/e"]);
+ InitScratchFS, Always, TestOutputList (
+ [["mkdir_p"; "/glob_expand3/b/c"];
+ ["touch"; "/glob_expand3/b/c/d"];
+ ["touch"; "/glob_expand3/b/c/e"];
+ ["glob_expand"; "/glob_expand3/*/x/*"]], [])],
"expand a wildcard path",
"\
This command searches for all the pathnames matching
with flags C<GLOB_MARK|GLOB_BRACE>.
See that manual page for more details.");
- ("scrub_device", (RErr, [Device "device"]), 114, [DangerWillRobinson; Optional "scrub"],
+ ("scrub_device", (RErr, [Device "device"], []), 114, [DangerWillRobinson; Optional "scrub"],
[InitNone, Always, TestRun ( (* use /dev/sdc because it's smaller *)
[["scrub_device"; "/dev/sdc"]])],
"scrub (securely wipe) a device",
It is an interface to the L<scrub(1)> program. See that
manual page for more details.");
- ("scrub_file", (RErr, [Pathname "file"]), 115, [Optional "scrub"],
- [InitBasicFS, Always, TestRun (
- [["write"; "/file"; "content"];
- ["scrub_file"; "/file"]])],
+ ("scrub_file", (RErr, [Pathname "file"], []), 115, [Optional "scrub"],
+ [InitScratchFS, Always, TestRun (
+ [["write"; "/scrub_file"; "content"];
+ ["scrub_file"; "/scrub_file"]])],
"scrub (securely wipe) a file",
"\
This command writes patterns over a file to make data retrieval
It is an interface to the L<scrub(1)> program. See that
manual page for more details.");
- ("scrub_freespace", (RErr, [Pathname "dir"]), 116, [Optional "scrub"],
+ ("scrub_freespace", (RErr, [Pathname "dir"], []), 116, [Optional "scrub"],
[], (* XXX needs testing *)
"scrub (securely wipe) free space",
"\
It is an interface to the L<scrub(1)> program. See that
manual page for more details.");
- ("mkdtemp", (RString "dir", [Pathname "template"]), 117, [],
- [InitBasicFS, Always, TestRun (
- [["mkdir"; "/tmp"];
- ["mkdtemp"; "/tmp/tmpXXXXXX"]])],
+ ("mkdtemp", (RString "dir", [Pathname "template"], []), 117, [],
+ [InitScratchFS, Always, TestRun (
+ [["mkdir"; "/mkdtemp"];
+ ["mkdtemp"; "/mkdtemp/tmpXXXXXX"]])],
"create a temporary directory",
"\
This command creates a temporary directory. The
See also: L<mkdtemp(3)>");
- ("wc_l", (RInt "lines", [Pathname "path"]), 118, [],
+ ("wc_l", (RInt "lines", [Pathname "path"], []), 118, [],
[InitISOFS, Always, TestOutputInt (
[["wc_l"; "/10klines"]], 10000);
(* Test for RHBZ#579608, absolute symbolic links. *)
This command counts the lines in a file, using the
C<wc -l> external command.");
- ("wc_w", (RInt "words", [Pathname "path"]), 119, [],
+ ("wc_w", (RInt "words", [Pathname "path"], []), 119, [],
[InitISOFS, Always, TestOutputInt (
[["wc_w"; "/10klines"]], 10000)],
"count words in a file",
This command counts the words in a file, using the
C<wc -w> external command.");
- ("wc_c", (RInt "chars", [Pathname "path"]), 120, [],
+ ("wc_c", (RInt "chars", [Pathname "path"], []), 120, [],
[InitISOFS, Always, TestOutputInt (
[["wc_c"; "/100kallspaces"]], 102400)],
"count characters in a file",
This command counts the characters in a file, using the
C<wc -c> external command.");
- ("head", (RStringList "lines", [Pathname "path"]), 121, [ProtocolLimitWarning],
+ ("head", (RStringList "lines", [Pathname "path"], []), 121, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["head"; "/10klines"]], ["0abcdefghijklmnopqrstuvwxyz";"1abcdefghijklmnopqrstuvwxyz";"2abcdefghijklmnopqrstuvwxyz";"3abcdefghijklmnopqrstuvwxyz";"4abcdefghijklmnopqrstuvwxyz";"5abcdefghijklmnopqrstuvwxyz";"6abcdefghijklmnopqrstuvwxyz";"7abcdefghijklmnopqrstuvwxyz";"8abcdefghijklmnopqrstuvwxyz";"9abcdefghijklmnopqrstuvwxyz"]);
(* Test for RHBZ#579608, absolute symbolic links. *)
This command returns up to the first 10 lines of a file as
a list of strings.");
- ("head_n", (RStringList "lines", [Int "nrlines"; Pathname "path"]), 122, [ProtocolLimitWarning],
+ ("head_n", (RStringList "lines", [Int "nrlines"; Pathname "path"], []), 122, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["head_n"; "3"; "/10klines"]], ["0abcdefghijklmnopqrstuvwxyz";"1abcdefghijklmnopqrstuvwxyz";"2abcdefghijklmnopqrstuvwxyz"]);
InitISOFS, Always, TestOutputList (
If the parameter C<nrlines> is zero, this returns an empty list.");
- ("tail", (RStringList "lines", [Pathname "path"]), 123, [ProtocolLimitWarning],
+ ("tail", (RStringList "lines", [Pathname "path"], []), 123, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["tail"; "/10klines"]], ["9990abcdefghijklmnopqrstuvwxyz";"9991abcdefghijklmnopqrstuvwxyz";"9992abcdefghijklmnopqrstuvwxyz";"9993abcdefghijklmnopqrstuvwxyz";"9994abcdefghijklmnopqrstuvwxyz";"9995abcdefghijklmnopqrstuvwxyz";"9996abcdefghijklmnopqrstuvwxyz";"9997abcdefghijklmnopqrstuvwxyz";"9998abcdefghijklmnopqrstuvwxyz";"9999abcdefghijklmnopqrstuvwxyz"])],
"return last 10 lines of a file",
This command returns up to the last 10 lines of a file as
a list of strings.");
- ("tail_n", (RStringList "lines", [Int "nrlines"; Pathname "path"]), 124, [ProtocolLimitWarning],
+ ("tail_n", (RStringList "lines", [Int "nrlines"; Pathname "path"], []), 124, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["tail_n"; "3"; "/10klines"]], ["9997abcdefghijklmnopqrstuvwxyz";"9998abcdefghijklmnopqrstuvwxyz";"9999abcdefghijklmnopqrstuvwxyz"]);
InitISOFS, Always, TestOutputList (
If the parameter C<nrlines> is zero, this returns an empty list.");
- ("df", (RString "output", []), 125, [],
+ ("df", (RString "output", [], []), 125, [],
[], (* XXX Tricky to test because it depends on the exact format
* of the 'df' command and other imponderables.
*)
This command is mostly useful for interactive sessions. It
is I<not> intended that you try to parse the output string.
-Use C<statvfs> from programs.");
+Use C<guestfs_statvfs> from programs.");
- ("df_h", (RString "output", []), 126, [],
+ ("df_h", (RString "output", [], []), 126, [],
[], (* XXX Tricky to test because it depends on the exact format
* of the 'df' command and other imponderables.
*)
This command is mostly useful for interactive sessions. It
is I<not> intended that you try to parse the output string.
-Use C<statvfs> from programs.");
+Use C<guestfs_statvfs> from programs.");
- ("du", (RInt64 "sizekb", [Pathname "path"]), 127, [],
+ ("du", (RInt64 "sizekb", [Pathname "path"], []), 127, [Progress],
[InitISOFS, Always, TestOutputInt (
[["du"; "/directory"]], 2 (* ISO fs blocksize is 2K *))],
"estimate file space usage",
The result is the estimated size in I<kilobytes>
(ie. units of 1024 bytes).");
- ("initrd_list", (RStringList "filenames", [Pathname "path"]), 128, [],
+ ("initrd_list", (RStringList "filenames", [Pathname "path"], []), 128, [],
[InitISOFS, Always, TestOutputList (
[["initrd_list"; "/initrd"]], ["empty";"known-1";"known-2";"known-3";"known-4"; "known-5"])],
"list files in an initrd",
filesystem as initrd. We I<only> support the newer initramfs
format (compressed cpio files).");
- ("mount_loop", (RErr, [Pathname "file"; Pathname "mountpoint"]), 129, [],
+ ("mount_loop", (RErr, [Pathname "file"; Pathname "mountpoint"], []), 129, [],
[],
"mount a file using the loop device",
"\
in a file) on a mount point. It is entirely equivalent to
the command C<mount -o loop file mountpoint>.");
- ("mkswap", (RErr, [Device "device"]), 130, [],
+ ("mkswap", (RErr, [Device "device"], []), 130, [],
[InitEmpty, Always, TestRun (
[["part_disk"; "/dev/sda"; "mbr"];
["mkswap"; "/dev/sda1"]])],
"\
Create a swap partition on C<device>.");
- ("mkswap_L", (RErr, [String "label"; Device "device"]), 131, [],
+ ("mkswap_L", (RErr, [String "label"; Device "device"], []), 131, [],
[InitEmpty, Always, TestRun (
[["part_disk"; "/dev/sda"; "mbr"];
["mkswap_L"; "hello"; "/dev/sda1"]])],
(eg. C</dev/sda>), just to a partition. This appears to be
a limitation of the kernel or swap tools.");
- ("mkswap_U", (RErr, [String "uuid"; Device "device"]), 132, [Optional "linuxfsuuid"],
+ ("mkswap_U", (RErr, [String "uuid"; Device "device"], []), 132, [Optional "linuxfsuuid"],
(let uuid = uuidgen () in
[InitEmpty, Always, TestRun (
[["part_disk"; "/dev/sda"; "mbr"];
"\
Create a swap partition on C<device> with UUID C<uuid>.");
- ("mknod", (RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"]), 133, [Optional "mknod"],
- [InitBasicFS, Always, TestOutputStruct (
- [["mknod"; "0o10777"; "0"; "0"; "/node"];
+ ("mknod", (RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"], []), 133, [Optional "mknod"],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["mknod"; "0o10777"; "0"; "0"; "/mknod"];
(* NB: default umask 022 means 0777 -> 0755 in these tests *)
- ["stat"; "/node"]], [CompareWithInt ("mode", 0o10755)]);
- InitBasicFS, Always, TestOutputStruct (
- [["mknod"; "0o60777"; "66"; "99"; "/node"];
- ["stat"; "/node"]], [CompareWithInt ("mode", 0o60755)])],
+ ["stat"; "/mknod"]], [CompareWithInt ("mode", 0o10755)]);
+ InitScratchFS, Always, TestOutputStruct (
+ [["mknod"; "0o60777"; "66"; "99"; "/mknod2"];
+ ["stat"; "/mknod2"]], [CompareWithInt ("mode", 0o60755)])],
"make block, character or FIFO devices",
"\
This call creates block or character special devices, or
The mode actually set is affected by the umask.");
- ("mkfifo", (RErr, [Int "mode"; Pathname "path"]), 134, [Optional "mknod"],
- [InitBasicFS, Always, TestOutputStruct (
- [["mkfifo"; "0o777"; "/node"];
- ["stat"; "/node"]], [CompareWithInt ("mode", 0o10755)])],
+ ("mkfifo", (RErr, [Int "mode"; Pathname "path"], []), 134, [Optional "mknod"],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["mkfifo"; "0o777"; "/mkfifo"];
+ ["stat"; "/mkfifo"]], [CompareWithInt ("mode", 0o10755)])],
"make FIFO (named pipe)",
"\
This call creates a FIFO (named pipe) called C<path> with
The mode actually set is affected by the umask.");
- ("mknod_b", (RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"]), 135, [Optional "mknod"],
- [InitBasicFS, Always, TestOutputStruct (
- [["mknod_b"; "0o777"; "99"; "66"; "/node"];
- ["stat"; "/node"]], [CompareWithInt ("mode", 0o60755)])],
+ ("mknod_b", (RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"], []), 135, [Optional "mknod"],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["mknod_b"; "0o777"; "99"; "66"; "/mknod_b"];
+ ["stat"; "/mknod_b"]], [CompareWithInt ("mode", 0o60755)])],
"make block device node",
"\
This call creates a block device node called C<path> with
The mode actually set is affected by the umask.");
- ("mknod_c", (RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"]), 136, [Optional "mknod"],
- [InitBasicFS, Always, TestOutputStruct (
- [["mknod_c"; "0o777"; "99"; "66"; "/node"];
- ["stat"; "/node"]], [CompareWithInt ("mode", 0o20755)])],
+ ("mknod_c", (RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"], []), 136, [Optional "mknod"],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["mknod_c"; "0o777"; "99"; "66"; "/mknod_c"];
+ ["stat"; "/mknod_c"]], [CompareWithInt ("mode", 0o20755)])],
"make char device node",
"\
This call creates a char device node called C<path> with
The mode actually set is affected by the umask.");
- ("umask", (RInt "oldmask", [Int "mask"]), 137, [FishOutput FishOutputOctal],
+ ("umask", (RInt "oldmask", [Int "mask"], []), 137, [FishOutput FishOutputOctal],
[InitEmpty, Always, TestOutputInt (
[["umask"; "0o22"]], 0o22)],
"set file mode creation mask (umask)",
This call returns the previous umask.");
- ("readdir", (RStructList ("entries", "dirent"), [Pathname "dir"]), 138, [],
+ ("readdir", (RStructList ("entries", "dirent"), [Pathname "dir"], []), 138, [],
[],
"read directories entries",
"\
get a simple list of names, use C<guestfs_ls>. To get a printable
directory for human consumption, use C<guestfs_ll>.");
- ("sfdiskM", (RErr, [Device "device"; StringList "lines"]), 139, [DangerWillRobinson],
+ ("sfdiskM", (RErr, [Device "device"; StringList "lines"], []), 139, [DangerWillRobinson; DeprecatedBy "part_add"],
[],
"create partitions on a block device",
"\
See also: C<guestfs_sfdisk>, the L<sfdisk(8)> manpage
and C<guestfs_part_disk>");
- ("zfile", (RString "description", [String "meth"; Pathname "path"]), 140, [DeprecatedBy "file"],
+ ("zfile", (RString "description", [String "meth"; Pathname "path"], []), 140, [DeprecatedBy "file"],
[],
"determine file type inside a compressed file",
"\
Since 1.0.63, use C<guestfs_file> instead which can now
process compressed files.");
- ("getxattrs", (RStructList ("xattrs", "xattr"), [Pathname "path"]), 141, [Optional "linuxxattrs"],
+ ("getxattrs", (RStructList ("xattrs", "xattr"), [Pathname "path"], []), 141, [Optional "linuxxattrs"],
[],
"list extended attributes of a file or directory",
"\
See also: C<guestfs_lgetxattrs>, L<attr(5)>.");
- ("lgetxattrs", (RStructList ("xattrs", "xattr"), [Pathname "path"]), 142, [Optional "linuxxattrs"],
+ ("lgetxattrs", (RStructList ("xattrs", "xattr"), [Pathname "path"], []), 142, [Optional "linuxxattrs"],
[],
"list extended attributes of a file or directory",
"\
("setxattr", (RErr, [String "xattr";
String "val"; Int "vallen"; (* will be BufferIn *)
- Pathname "path"]), 143, [Optional "linuxxattrs"],
+ Pathname "path"], []), 143, [Optional "linuxxattrs"],
[],
"set extended attribute of a file or directory",
"\
("lsetxattr", (RErr, [String "xattr";
String "val"; Int "vallen"; (* will be BufferIn *)
- Pathname "path"]), 144, [Optional "linuxxattrs"],
+ Pathname "path"], []), 144, [Optional "linuxxattrs"],
[],
"set extended attribute of a file or directory",
"\
is a symbolic link, then it sets an extended attribute
of the link itself.");
- ("removexattr", (RErr, [String "xattr"; Pathname "path"]), 145, [Optional "linuxxattrs"],
+ ("removexattr", (RErr, [String "xattr"; Pathname "path"], []), 145, [Optional "linuxxattrs"],
[],
"remove extended attribute of a file or directory",
"\
See also: C<guestfs_lremovexattr>, L<attr(5)>.");
- ("lremovexattr", (RErr, [String "xattr"; Pathname "path"]), 146, [Optional "linuxxattrs"],
+ ("lremovexattr", (RErr, [String "xattr"; Pathname "path"], []), 146, [Optional "linuxxattrs"],
[],
"remove extended attribute of a file or directory",
"\
is a symbolic link, then it removes an extended attribute
of the link itself.");
- ("mountpoints", (RHashtable "mps", []), 147, [],
+ ("mountpoints", (RHashtable "mps", [], []), 147, [],
[],
"show mountpoints",
"\
a list of devices. This one returns a hash table (map) of
device name to directory where the device is mounted.");
- ("mkmountpoint", (RErr, [String "exemptpath"]), 148, [],
+ ("mkmountpoint", (RErr, [String "exemptpath"], []), 148, [],
(* This is a special case: while you would expect a parameter
* of type "Pathname", that doesn't work, because it implies
* NEED_ROOT in the generated calling code in stubs.c, and
add-ro Fedora-11-i686-Live.iso
run
mkmountpoint /cd
- mkmountpoint /squash
- mkmountpoint /ext3
+ mkmountpoint /sqsh
+ mkmountpoint /ext3fs
mount /dev/sda /cd
- mount-loop /cd/LiveOS/squashfs.img /squash
- mount-loop /squash/LiveOS/ext3fs.img /ext3
+ mount-loop /cd/LiveOS/squashfs.img /sqsh
+ mount-loop /sqsh/LiveOS/ext3fs.img /ext3fs
-The inner filesystem is now unpacked under the /ext3 mountpoint.");
+The inner filesystem is now unpacked under the /ext3fs mountpoint.
- ("rmmountpoint", (RErr, [String "exemptpath"]), 149, [],
+C<guestfs_mkmountpoint> is not compatible with C<guestfs_umount_all>.
+You may get unexpected errors if you try to mix these calls. It is
+safest to manually unmount filesystems and remove mountpoints after use.
+
+C<guestfs_umount_all> unmounts filesystems by sorting the paths
+longest first, so for this to work for manual mountpoints, you
+must ensure that the innermost mountpoints have the longest
+pathnames, as in the example code above.
+
+For more details see L<https://bugzilla.redhat.com/show_bug.cgi?id=599503>
+
+Autosync [see C<guestfs_set_autosync>, this is set by default on
+handles] can cause C<guestfs_umount_all> to be called when the handle
+is closed which can also trigger these issues.");
+
+ ("rmmountpoint", (RErr, [String "exemptpath"], []), 149, [],
[],
"remove a mountpoint",
"\
with C<guestfs_mkmountpoint>. See C<guestfs_mkmountpoint>
for full details.");
- ("read_file", (RBufferOut "content", [Pathname "path"]), 150, [ProtocolLimitWarning],
+ ("read_file", (RBufferOut "content", [Pathname "path"], []), 150, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputBuffer (
[["read_file"; "/known-4"]], "abc\ndef\nghi");
(* Test various near large, large and too large files (RHBZ#589039). *)
- InitBasicFS, Always, TestLastFail (
- [["touch"; "/a"];
- ["truncate_size"; "/a"; "4194303"]; (* GUESTFS_MESSAGE_MAX - 1 *)
- ["read_file"; "/a"]]);
- InitBasicFS, Always, TestLastFail (
- [["touch"; "/a"];
- ["truncate_size"; "/a"; "4194304"]; (* GUESTFS_MESSAGE_MAX *)
- ["read_file"; "/a"]]);
- InitBasicFS, Always, TestLastFail (
- [["touch"; "/a"];
- ["truncate_size"; "/a"; "41943040"]; (* GUESTFS_MESSAGE_MAX * 10 *)
- ["read_file"; "/a"]])],
+ InitScratchFS, Always, TestLastFail (
+ [["touch"; "/read_file"];
+ ["truncate_size"; "/read_file"; "4194303"]; (* GUESTFS_MESSAGE_MAX - 1 *)
+ ["read_file"; "/read_file"]]);
+ InitScratchFS, Always, TestLastFail (
+ [["touch"; "/read_file2"];
+ ["truncate_size"; "/read_file2"; "4194304"]; (* GUESTFS_MESSAGE_MAX *)
+ ["read_file"; "/read_file2"]]);
+ InitScratchFS, Always, TestLastFail (
+ [["touch"; "/read_file3"];
+ ["truncate_size"; "/read_file3"; "41943040"]; (* GUESTFS_MESSAGE_MAX * 10 *)
+ ["read_file"; "/read_file3"]])],
"read a file",
"\
This calls returns the contents of the file C<path> as a
However unlike C<guestfs_download>, this function is limited
in the total size of file that can be handled.");
- ("grep", (RStringList "lines", [String "regex"; Pathname "path"]), 151, [ProtocolLimitWarning],
+ ("grep", (RStringList "lines", [String "regex"; Pathname "path"], []), 151, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["grep"; "abc"; "/test-grep.txt"]], ["abc"; "abc123"]);
InitISOFS, Always, TestOutputList (
This calls the external C<grep> program and returns the
matching lines.");
- ("egrep", (RStringList "lines", [String "regex"; Pathname "path"]), 152, [ProtocolLimitWarning],
+ ("egrep", (RStringList "lines", [String "regex"; Pathname "path"], []), 152, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["egrep"; "abc"; "/test-grep.txt"]], ["abc"; "abc123"])],
"return lines matching a pattern",
This calls the external C<egrep> program and returns the
matching lines.");
- ("fgrep", (RStringList "lines", [String "pattern"; Pathname "path"]), 153, [ProtocolLimitWarning],
+ ("fgrep", (RStringList "lines", [String "pattern"; Pathname "path"], []), 153, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["fgrep"; "abc"; "/test-grep.txt"]], ["abc"; "abc123"])],
"return lines matching a pattern",
This calls the external C<fgrep> program and returns the
matching lines.");
- ("grepi", (RStringList "lines", [String "regex"; Pathname "path"]), 154, [ProtocolLimitWarning],
+ ("grepi", (RStringList "lines", [String "regex"; Pathname "path"], []), 154, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["grepi"; "abc"; "/test-grep.txt"]], ["abc"; "abc123"; "ABC"])],
"return lines matching a pattern",
This calls the external C<grep -i> program and returns the
matching lines.");
- ("egrepi", (RStringList "lines", [String "regex"; Pathname "path"]), 155, [ProtocolLimitWarning],
+ ("egrepi", (RStringList "lines", [String "regex"; Pathname "path"], []), 155, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["egrepi"; "abc"; "/test-grep.txt"]], ["abc"; "abc123"; "ABC"])],
"return lines matching a pattern",
This calls the external C<egrep -i> program and returns the
matching lines.");
- ("fgrepi", (RStringList "lines", [String "pattern"; Pathname "path"]), 156, [ProtocolLimitWarning],
+ ("fgrepi", (RStringList "lines", [String "pattern"; Pathname "path"], []), 156, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["fgrepi"; "abc"; "/test-grep.txt"]], ["abc"; "abc123"; "ABC"])],
"return lines matching a pattern",
This calls the external C<fgrep -i> program and returns the
matching lines.");
- ("zgrep", (RStringList "lines", [String "regex"; Pathname "path"]), 157, [ProtocolLimitWarning],
+ ("zgrep", (RStringList "lines", [String "regex"; Pathname "path"], []), 157, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["zgrep"; "abc"; "/test-grep.txt.gz"]], ["abc"; "abc123"])],
"return lines matching a pattern",
This calls the external C<zgrep> program and returns the
matching lines.");
- ("zegrep", (RStringList "lines", [String "regex"; Pathname "path"]), 158, [ProtocolLimitWarning],
+ ("zegrep", (RStringList "lines", [String "regex"; Pathname "path"], []), 158, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["zegrep"; "abc"; "/test-grep.txt.gz"]], ["abc"; "abc123"])],
"return lines matching a pattern",
This calls the external C<zegrep> program and returns the
matching lines.");
- ("zfgrep", (RStringList "lines", [String "pattern"; Pathname "path"]), 159, [ProtocolLimitWarning],
+ ("zfgrep", (RStringList "lines", [String "pattern"; Pathname "path"], []), 159, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["zfgrep"; "abc"; "/test-grep.txt.gz"]], ["abc"; "abc123"])],
"return lines matching a pattern",
This calls the external C<zfgrep> program and returns the
matching lines.");
- ("zgrepi", (RStringList "lines", [String "regex"; Pathname "path"]), 160, [ProtocolLimitWarning],
+ ("zgrepi", (RStringList "lines", [String "regex"; Pathname "path"], []), 160, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["zgrepi"; "abc"; "/test-grep.txt.gz"]], ["abc"; "abc123"; "ABC"])],
"return lines matching a pattern",
This calls the external C<zgrep -i> program and returns the
matching lines.");
- ("zegrepi", (RStringList "lines", [String "regex"; Pathname "path"]), 161, [ProtocolLimitWarning],
+ ("zegrepi", (RStringList "lines", [String "regex"; Pathname "path"], []), 161, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["zegrepi"; "abc"; "/test-grep.txt.gz"]], ["abc"; "abc123"; "ABC"])],
"return lines matching a pattern",
This calls the external C<zegrep -i> program and returns the
matching lines.");
- ("zfgrepi", (RStringList "lines", [String "pattern"; Pathname "path"]), 162, [ProtocolLimitWarning],
+ ("zfgrepi", (RStringList "lines", [String "pattern"; Pathname "path"], []), 162, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputList (
[["zfgrepi"; "abc"; "/test-grep.txt.gz"]], ["abc"; "abc123"; "ABC"])],
"return lines matching a pattern",
This calls the external C<zfgrep -i> program and returns the
matching lines.");
- ("realpath", (RString "rpath", [Pathname "path"]), 163, [Optional "realpath"],
+ ("realpath", (RString "rpath", [Pathname "path"], []), 163, [Optional "realpath"],
[InitISOFS, Always, TestOutput (
[["realpath"; "/../directory"]], "/directory")],
"canonicalized absolute pathname",
Return the canonicalized absolute pathname of C<path>. The
returned path has no C<.>, C<..> or symbolic link path elements.");
- ("ln", (RErr, [String "target"; Pathname "linkname"]), 164, [],
- [InitBasicFS, Always, TestOutputStruct (
- [["touch"; "/a"];
- ["ln"; "/a"; "/b"];
- ["stat"; "/b"]], [CompareWithInt ("nlink", 2)])],
+ ("ln", (RErr, [String "target"; Pathname "linkname"], []), 164, [],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["mkdir"; "/ln"];
+ ["touch"; "/ln/a"];
+ ["ln"; "/ln/a"; "/ln/b"];
+ ["stat"; "/ln/b"]], [CompareWithInt ("nlink", 2)])],
"create a hard link",
"\
This command creates a hard link using the C<ln> command.");
- ("ln_f", (RErr, [String "target"; Pathname "linkname"]), 165, [],
- [InitBasicFS, Always, TestOutputStruct (
- [["touch"; "/a"];
- ["touch"; "/b"];
- ["ln_f"; "/a"; "/b"];
- ["stat"; "/b"]], [CompareWithInt ("nlink", 2)])],
+ ("ln_f", (RErr, [String "target"; Pathname "linkname"], []), 165, [],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["mkdir"; "/ln_f"];
+ ["touch"; "/ln_f/a"];
+ ["touch"; "/ln_f/b"];
+ ["ln_f"; "/ln_f/a"; "/ln_f/b"];
+ ["stat"; "/ln_f/b"]], [CompareWithInt ("nlink", 2)])],
"create a hard link",
"\
This command creates a hard link using the C<ln -f> command.
-The C<-f> option removes the link (C<linkname>) if it exists already.");
-
- ("ln_s", (RErr, [String "target"; Pathname "linkname"]), 166, [],
- [InitBasicFS, Always, TestOutputStruct (
- [["touch"; "/a"];
- ["ln_s"; "a"; "/b"];
- ["lstat"; "/b"]], [CompareWithInt ("mode", 0o120777)])],
+The I<-f> option removes the link (C<linkname>) if it exists already.");
+
+ ("ln_s", (RErr, [String "target"; Pathname "linkname"], []), 166, [],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["mkdir"; "/ln_s"];
+ ["touch"; "/ln_s/a"];
+ ["ln_s"; "a"; "/ln_s/b"];
+ ["lstat"; "/ln_s/b"]], [CompareWithInt ("mode", 0o120777)])],
"create a symbolic link",
"\
This command creates a symbolic link using the C<ln -s> command.");
- ("ln_sf", (RErr, [String "target"; Pathname "linkname"]), 167, [],
- [InitBasicFS, Always, TestOutput (
- [["mkdir_p"; "/a/b"];
- ["touch"; "/a/b/c"];
- ["ln_sf"; "../d"; "/a/b/c"];
- ["readlink"; "/a/b/c"]], "../d")],
+ ("ln_sf", (RErr, [String "target"; Pathname "linkname"], []), 167, [],
+ [InitScratchFS, Always, TestOutput (
+ [["mkdir_p"; "/ln_sf/b"];
+ ["touch"; "/ln_sf/b/c"];
+ ["ln_sf"; "../d"; "/ln_sf/b/c"];
+ ["readlink"; "/ln_sf/b/c"]], "../d")],
"create a symbolic link",
"\
This command creates a symbolic link using the C<ln -sf> command,
-The C<-f> option removes the link (C<linkname>) if it exists already.");
+The I<-f> option removes the link (C<linkname>) if it exists already.");
- ("readlink", (RString "link", [Pathname "path"]), 168, [],
+ ("readlink", (RString "link", [Pathname "path"], []), 168, [],
[] (* XXX tested above *),
"read the target of a symbolic link",
"\
This command reads the target of a symbolic link.");
- ("fallocate", (RErr, [Pathname "path"; Int "len"]), 169, [DeprecatedBy "fallocate64"],
- [InitBasicFS, Always, TestOutputStruct (
- [["fallocate"; "/a"; "1000000"];
- ["stat"; "/a"]], [CompareWithInt ("size", 1_000_000)])],
+ ("fallocate", (RErr, [Pathname "path"; Int "len"], []), 169, [DeprecatedBy "fallocate64"],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["fallocate"; "/fallocate"; "1000000"];
+ ["stat"; "/fallocate"]], [CompareWithInt ("size", 1_000_000)])],
"preallocate a file in the guest filesystem",
"\
This command preallocates a file (containing zero bytes) named
C<alloc> command which allocates a file in the host and
attaches it as a device.");
- ("swapon_device", (RErr, [Device "device"]), 170, [],
+ ("swapon_device", (RErr, [Device "device"], []), 170, [],
[InitPartition, Always, TestRun (
[["mkswap"; "/dev/sda1"];
["swapon_device"; "/dev/sda1"];
information about the host to the guest this way. Instead,
attach a new host device to the guest and swap on that.");
- ("swapoff_device", (RErr, [Device "device"]), 171, [],
+ ("swapoff_device", (RErr, [Device "device"], []), 171, [],
[], (* XXX tested by swapon_device *)
"disable swap on device",
"\
device or partition named C<device>.
See C<guestfs_swapon_device>.");
- ("swapon_file", (RErr, [Pathname "file"]), 172, [],
- [InitBasicFS, Always, TestRun (
- [["fallocate"; "/swap"; "8388608"];
- ["mkswap_file"; "/swap"];
- ["swapon_file"; "/swap"];
- ["swapoff_file"; "/swap"]])],
+ ("swapon_file", (RErr, [Pathname "file"], []), 172, [],
+ [InitScratchFS, Always, TestRun (
+ [["fallocate"; "/swapon_file"; "8388608"];
+ ["mkswap_file"; "/swapon_file"];
+ ["swapon_file"; "/swapon_file"];
+ ["swapoff_file"; "/swapon_file"];
+ ["rm"; "/swapon_file"]])],
"enable swap on file",
"\
This command enables swap to a file.
See C<guestfs_swapon_device> for other notes.");
- ("swapoff_file", (RErr, [Pathname "file"]), 173, [],
+ ("swapoff_file", (RErr, [Pathname "file"], []), 173, [],
[], (* XXX tested by swapon_file *)
"disable swap on file",
"\
This command disables the libguestfs appliance swap on file.");
- ("swapon_label", (RErr, [String "label"]), 174, [],
+ ("swapon_label", (RErr, [String "label"], []), 174, [],
[InitEmpty, Always, TestRun (
- [["part_disk"; "/dev/sdb"; "mbr"];
- ["mkswap_L"; "swapit"; "/dev/sdb1"];
+ [["part_disk"; "/dev/sda"; "mbr"];
+ ["mkswap_L"; "swapit"; "/dev/sda1"];
["swapon_label"; "swapit"];
["swapoff_label"; "swapit"];
- ["zero"; "/dev/sdb"];
- ["blockdev_rereadpt"; "/dev/sdb"]])],
+ ["zero"; "/dev/sda"];
+ ["blockdev_rereadpt"; "/dev/sda"]])],
"enable swap on labeled swap partition",
"\
This command enables swap to a labeled swap partition.
See C<guestfs_swapon_device> for other notes.");
- ("swapoff_label", (RErr, [String "label"]), 175, [],
+ ("swapoff_label", (RErr, [String "label"], []), 175, [],
[], (* XXX tested by swapon_label *)
"disable swap on labeled swap partition",
"\
This command disables the libguestfs appliance swap on
labeled swap partition.");
- ("swapon_uuid", (RErr, [String "uuid"]), 176, [Optional "linuxfsuuid"],
+ ("swapon_uuid", (RErr, [String "uuid"], []), 176, [Optional "linuxfsuuid"],
(let uuid = uuidgen () in
[InitEmpty, Always, TestRun (
- [["mkswap_U"; uuid; "/dev/sdb"];
+ [["mkswap_U"; uuid; "/dev/sdc"];
["swapon_uuid"; uuid];
["swapoff_uuid"; uuid]])]),
"enable swap on swap partition by UUID",
This command enables swap to a swap partition with the given UUID.
See C<guestfs_swapon_device> for other notes.");
- ("swapoff_uuid", (RErr, [String "uuid"]), 177, [Optional "linuxfsuuid"],
+ ("swapoff_uuid", (RErr, [String "uuid"], []), 177, [Optional "linuxfsuuid"],
[], (* XXX tested by swapon_uuid *)
"disable swap on swap partition by UUID",
"\
This command disables the libguestfs appliance swap partition
with the given UUID.");
- ("mkswap_file", (RErr, [Pathname "path"]), 178, [],
- [InitBasicFS, Always, TestRun (
- [["fallocate"; "/swap"; "8388608"];
- ["mkswap_file"; "/swap"]])],
+ ("mkswap_file", (RErr, [Pathname "path"], []), 178, [],
+ [InitScratchFS, Always, TestRun (
+ [["fallocate"; "/mkswap_file"; "8388608"];
+ ["mkswap_file"; "/mkswap_file"];
+ ["rm"; "/mkswap_file"]])],
"create a swap file",
"\
Create a swap file.
This command just writes a swap file signature to an existing
file. To create the file itself, use something like C<guestfs_fallocate>.");
- ("inotify_init", (RErr, [Int "maxevents"]), 179, [Optional "inotify"],
+ ("inotify_init", (RErr, [Int "maxevents"], []), 179, [Optional "inotify"],
[InitISOFS, Always, TestRun (
[["inotify_init"; "0"]])],
"create an inotify handle",
via libguestfs. Note that there is one global inotify handle
per libguestfs instance.");
- ("inotify_add_watch", (RInt64 "wd", [Pathname "path"; Int "mask"]), 180, [Optional "inotify"],
- [InitBasicFS, Always, TestOutputList (
- [["inotify_init"; "0"];
- ["inotify_add_watch"; "/"; "1073741823"];
- ["touch"; "/a"];
- ["touch"; "/b"];
+ ("inotify_add_watch", (RInt64 "wd", [Pathname "path"; Int "mask"], []), 180, [Optional "inotify"],
+ [InitScratchFS, Always, TestOutputList (
+ [["mkdir"; "/inotify_add_watch"];
+ ["inotify_init"; "0"];
+ ["inotify_add_watch"; "/inotify_add_watch"; "1073741823"];
+ ["touch"; "/inotify_add_watch/a"];
+ ["touch"; "/inotify_add_watch/b"];
["inotify_files"]], ["a"; "b"])],
"add an inotify watch",
"\
defined by the Linux kernel ABI and are listed in
C</usr/include/sys/inotify.h>.");
- ("inotify_rm_watch", (RErr, [Int(*XXX64*) "wd"]), 181, [Optional "inotify"],
+ ("inotify_rm_watch", (RErr, [Int(*XXX64*) "wd"], []), 181, [Optional "inotify"],
[],
"remove an inotify watch",
"\
Remove a previously defined inotify watch.
See C<guestfs_inotify_add_watch>.");
- ("inotify_read", (RStructList ("events", "inotify_event"), []), 182, [Optional "inotify"],
+ ("inotify_read", (RStructList ("events", "inotify_event"), [], []), 182, [Optional "inotify"],
[],
"return list of inotify events",
"\
read events up to the maximum appliance-to-host message
size and leave remaining events in the queue.");
- ("inotify_files", (RStringList "paths", []), 183, [Optional "inotify"],
+ ("inotify_files", (RStringList "paths", [], []), 183, [Optional "inotify"],
[],
"return list of watched files that had events",
"\
which just returns a list of pathnames of objects that were
touched. The returned pathnames are sorted and deduplicated.");
- ("inotify_close", (RErr, []), 184, [Optional "inotify"],
+ ("inotify_close", (RErr, [], []), 184, [Optional "inotify"],
[],
"close the inotify handle",
"\
opened by inotify_init. It removes all watches, throws
away any pending events, and deallocates all resources.");
- ("setcon", (RErr, [String "context"]), 185, [Optional "selinux"],
+ ("setcon", (RErr, [String "context"], []), 185, [Optional "selinux"],
[],
"set SELinux security context",
"\
See the documentation about SELINUX in L<guestfs(3)>.");
- ("getcon", (RString "context", []), 186, [Optional "selinux"],
+ ("getcon", (RString "context", [], []), 186, [Optional "selinux"],
[],
"get SELinux security context",
"\
See the documentation about SELINUX in L<guestfs(3)>,
and C<guestfs_setcon>");
- ("mkfs_b", (RErr, [String "fstype"; Int "blocksize"; Device "device"]), 187, [],
+ ("mkfs_b", (RErr, [String "fstype"; Int "blocksize"; Device "device"], []), 187, [DeprecatedBy "mkfs_opts"],
[InitEmpty, Always, TestOutput (
[["part_disk"; "/dev/sda"; "mbr"];
["mkfs_b"; "ext2"; "4096"; "/dev/sda1"];
For VFAT and NTFS the C<blocksize> parameter is treated as
the requested cluster size.");
- ("mke2journal", (RErr, [Int "blocksize"; Device "device"]), 188, [],
+ ("mke2journal", (RErr, [Int "blocksize"; Device "device"], []), 188, [],
[InitEmpty, Always, TestOutput (
- [["sfdiskM"; "/dev/sda"; ",100 ,"];
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "-64"];
["mke2journal"; "4096"; "/dev/sda1"];
["mke2fs_J"; "ext2"; "4096"; "/dev/sda2"; "/dev/sda1"];
["mount_options"; ""; "/dev/sda2"; "/"];
mke2fs -O journal_dev -b blocksize device");
- ("mke2journal_L", (RErr, [Int "blocksize"; String "label"; Device "device"]), 189, [],
+ ("mke2journal_L", (RErr, [Int "blocksize"; String "label"; Device "device"], []), 189, [],
[InitEmpty, Always, TestOutput (
- [["sfdiskM"; "/dev/sda"; ",100 ,"];
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "-64"];
["mke2journal_L"; "4096"; "JOURNAL"; "/dev/sda1"];
["mke2fs_JL"; "ext2"; "4096"; "/dev/sda2"; "JOURNAL"];
["mount_options"; ""; "/dev/sda2"; "/"];
"\
This creates an ext2 external journal on C<device> with label C<label>.");
- ("mke2journal_U", (RErr, [Int "blocksize"; String "uuid"; Device "device"]), 190, [Optional "linuxfsuuid"],
+ ("mke2journal_U", (RErr, [Int "blocksize"; String "uuid"; Device "device"], []), 190, [Optional "linuxfsuuid"],
(let uuid = uuidgen () in
[InitEmpty, Always, TestOutput (
- [["sfdiskM"; "/dev/sda"; ",100 ,"];
+ [["part_init"; "/dev/sda"; "mbr"];
+ ["part_add"; "/dev/sda"; "p"; "64"; "204799"];
+ ["part_add"; "/dev/sda"; "p"; "204800"; "-64"];
["mke2journal_U"; "4096"; uuid; "/dev/sda1"];
["mke2fs_JU"; "ext2"; "4096"; "/dev/sda2"; uuid];
["mount_options"; ""; "/dev/sda2"; "/"];
"\
This creates an ext2 external journal on C<device> with UUID C<uuid>.");
- ("mke2fs_J", (RErr, [String "fstype"; Int "blocksize"; Device "device"; Device "journal"]), 191, [],
+ ("mke2fs_J", (RErr, [String "fstype"; Int "blocksize"; Device "device"; Device "journal"], []), 191, [],
[],
"make ext2/3/4 filesystem with external journal",
"\
See also C<guestfs_mke2journal>.");
- ("mke2fs_JL", (RErr, [String "fstype"; Int "blocksize"; Device "device"; String "label"]), 192, [],
+ ("mke2fs_JL", (RErr, [String "fstype"; Int "blocksize"; Device "device"; String "label"], []), 192, [],
[],
"make ext2/3/4 filesystem with external journal",
"\
See also C<guestfs_mke2journal_L>.");
- ("mke2fs_JU", (RErr, [String "fstype"; Int "blocksize"; Device "device"; String "uuid"]), 193, [Optional "linuxfsuuid"],
+ ("mke2fs_JU", (RErr, [String "fstype"; Int "blocksize"; Device "device"; String "uuid"], []), 193, [Optional "linuxfsuuid"],
[],
"make ext2/3/4 filesystem with external journal",
"\
See also C<guestfs_mke2journal_U>.");
- ("modprobe", (RErr, [String "modulename"]), 194, [Optional "linuxmodules"],
+ ("modprobe", (RErr, [String "modulename"], []), 194, [Optional "linuxmodules"],
[InitNone, Always, TestRun [["modprobe"; "fat"]]],
"load a kernel module",
"\
The kernel module must have been whitelisted when libguestfs
was built (see C<appliance/kmod.whitelist.in> in the source).");
- ("echo_daemon", (RString "output", [StringList "words"]), 195, [],
+ ("echo_daemon", (RString "output", [StringList "words"], []), 195, [],
[InitNone, Always, TestOutput (
[["echo_daemon"; "This is a test"]], "This is a test"
)],
See also C<guestfs_ping_daemon>.");
- ("find0", (RErr, [Pathname "directory"; FileOut "files"]), 196, [],
+ ("find0", (RErr, [Pathname "directory"; FileOut "files"], []), 196, [],
[], (* There is a regression test for this. *)
"find all files and directories, returning NUL-separated list",
"\
=back");
- ("case_sensitive_path", (RString "rpath", [Pathname "path"]), 197, [],
+ ("case_sensitive_path", (RString "rpath", [Pathname "path"], []), 197, [],
[InitISOFS, Always, TestOutput (
[["case_sensitive_path"; "/DIRECTORY"]], "/directory");
InitISOFS, Always, TestOutput (
[["case_sensitive_path"; "/Known-1"]], "/known-1");
InitISOFS, Always, TestLastFail (
[["case_sensitive_path"; "/Known-1/"]]);
- InitBasicFS, Always, TestOutput (
- [["mkdir"; "/a"];
- ["mkdir"; "/a/bbb"];
- ["touch"; "/a/bbb/c"];
- ["case_sensitive_path"; "/A/bbB/C"]], "/a/bbb/c");
- InitBasicFS, Always, TestOutput (
- [["mkdir"; "/a"];
- ["mkdir"; "/a/bbb"];
- ["touch"; "/a/bbb/c"];
- ["case_sensitive_path"; "/A////bbB/C"]], "/a/bbb/c");
- InitBasicFS, Always, TestLastFail (
- [["mkdir"; "/a"];
- ["mkdir"; "/a/bbb"];
- ["touch"; "/a/bbb/c"];
- ["case_sensitive_path"; "/A/bbb/../bbb/C"]])],
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/case_sensitive_path"];
+ ["mkdir"; "/case_sensitive_path/bbb"];
+ ["touch"; "/case_sensitive_path/bbb/c"];
+ ["case_sensitive_path"; "/CASE_SENSITIVE_path/bbB/C"]], "/case_sensitive_path/bbb/c");
+ InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/case_sensitive_path2"];
+ ["mkdir"; "/case_sensitive_path2/bbb"];
+ ["touch"; "/case_sensitive_path2/bbb/c"];
+ ["case_sensitive_path"; "/case_sensitive_PATH2////bbB/C"]], "/case_sensitive_path2/bbb/c");
+ InitScratchFS, Always, TestLastFail (
+ [["mkdir"; "/case_sensitive_path3"];
+ ["mkdir"; "/case_sensitive_path3/bbb"];
+ ["touch"; "/case_sensitive_path3/bbb/c"];
+ ["case_sensitive_path"; "/case_SENSITIVE_path3/bbb/../bbb/C"]])],
"return true path on case-insensitive filesystem",
"\
This can be used to resolve case insensitive paths on
See also C<guestfs_realpath>.");
- ("vfs_type", (RString "fstype", [Device "device"]), 198, [],
- [InitBasicFS, Always, TestOutput (
- [["vfs_type"; "/dev/sda1"]], "ext2")],
+ ("vfs_type", (RString "fstype", [Device "device"], []), 198, [],
+ [InitScratchFS, Always, TestOutput (
+ [["vfs_type"; "/dev/sdb1"]], "ext2")],
"get the Linux VFS type corresponding to a mounted device",
"\
This command gets the filesystem type corresponding to
if you mounted it without specifying the filesystem type.
For example a string such as C<ext3> or C<ntfs>.");
- ("truncate", (RErr, [Pathname "path"]), 199, [],
- [InitBasicFS, Always, TestOutputStruct (
- [["write"; "/test"; "some stuff so size is not zero"];
- ["truncate"; "/test"];
- ["stat"; "/test"]], [CompareWithInt ("size", 0)])],
+ ("truncate", (RErr, [Pathname "path"], []), 199, [],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["write"; "/truncate"; "some stuff so size is not zero"];
+ ["truncate"; "/truncate"];
+ ["stat"; "/truncate"]], [CompareWithInt ("size", 0)])],
"truncate a file to zero size",
"\
This command truncates C<path> to a zero-length file. The
file must exist already.");
- ("truncate_size", (RErr, [Pathname "path"; Int64 "size"]), 200, [],
- [InitBasicFS, Always, TestOutputStruct (
- [["touch"; "/test"];
- ["truncate_size"; "/test"; "1000"];
- ["stat"; "/test"]], [CompareWithInt ("size", 1000)])],
+ ("truncate_size", (RErr, [Pathname "path"; Int64 "size"], []), 200, [],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["touch"; "/truncate_size"];
+ ["truncate_size"; "/truncate_size"; "1000"];
+ ["stat"; "/truncate_size"]], [CompareWithInt ("size", 1000)])],
"truncate a file to a particular size",
"\
This command truncates C<path> to size C<size> bytes. The file
for the file until you write to it). To create a non-sparse
file of zeroes, use C<guestfs_fallocate64> instead.");
- ("utimens", (RErr, [Pathname "path"; Int64 "atsecs"; Int64 "atnsecs"; Int64 "mtsecs"; Int64 "mtnsecs"]), 201, [],
- [InitBasicFS, Always, TestOutputStruct (
- [["touch"; "/test"];
- ["utimens"; "/test"; "12345"; "67890"; "9876"; "5432"];
- ["stat"; "/test"]], [CompareWithInt ("mtime", 9876)])],
+ ("utimens", (RErr, [Pathname "path"; Int64 "atsecs"; Int64 "atnsecs"; Int64 "mtsecs"; Int64 "mtnsecs"], []), 201, [],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["touch"; "/utimens"];
+ ["utimens"; "/utimens"; "12345"; "67890"; "9876"; "5432"];
+ ["stat"; "/utimens"]], [CompareWithInt ("mtime", 9876)])],
"set timestamp of a file with nanosecond precision",
"\
This command sets the timestamps of a file with nanosecond
the corresponding timestamp is left unchanged. (The
C<*secs> field is ignored in this case).");
- ("mkdir_mode", (RErr, [Pathname "path"; Int "mode"]), 202, [],
- [InitBasicFS, Always, TestOutputStruct (
- [["mkdir_mode"; "/test"; "0o111"];
- ["stat"; "/test"]], [CompareWithInt ("mode", 0o40111)])],
+ ("mkdir_mode", (RErr, [Pathname "path"; Int "mode"], []), 202, [],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["mkdir_mode"; "/mkdir_mode"; "0o111"];
+ ["stat"; "/mkdir_mode"]], [CompareWithInt ("mode", 0o40111)])],
"create a directory with a particular mode",
"\
This command creates a directory, setting the initial permissions
See also C<guestfs_mkdir>, C<guestfs_umask>");
- ("lchown", (RErr, [Int "owner"; Int "group"; Pathname "path"]), 203, [],
+ ("lchown", (RErr, [Int "owner"; Int "group"; Pathname "path"], []), 203, [],
[], (* XXX *)
"change file owner and group",
"\
names, you will need to locate and parse the password file
yourself (Augeas support makes this relatively easy).");
- ("lstatlist", (RStructList ("statbufs", "stat"), [Pathname "path"; StringList "names"]), 204, [],
+ ("lstatlist", (RStructList ("statbufs", "stat"), [Pathname "path"; StringList "names"], []), 204, [],
[], (* XXX *)
"lstat on multiple files",
"\
this call to fail. The caller must split up such requests
into smaller groups of names.");
- ("lxattrlist", (RStructList ("xattrs", "xattr"), [Pathname "path"; StringList "names"]), 205, [Optional "linuxxattrs"],
+ ("lxattrlist", (RStructList ("xattrs", "xattr"), [Pathname "path"; StringList "names"], []), 205, [Optional "linuxxattrs"],
[], (* XXX *)
"lgetxattr on multiple files",
"\
this call to fail. The caller must split up such requests
into smaller groups of names.");
- ("readlinklist", (RStringList "links", [Pathname "path"; StringList "names"]), 206, [],
+ ("readlinklist", (RStringList "links", [Pathname "path"; StringList "names"], []), 206, [],
[], (* XXX *)
"readlink on multiple files",
"\
this call to fail. The caller must split up such requests
into smaller groups of names.");
- ("pread", (RBufferOut "content", [Pathname "path"; Int "count"; Int64 "offset"]), 207, [ProtocolLimitWarning],
+ ("pread", (RBufferOut "content", [Pathname "path"; Int "count"; Int64 "offset"], []), 207, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputBuffer (
[["pread"; "/known-4"; "1"; "3"]], "\n");
InitISOFS, Always, TestOutputBuffer (
This may read fewer bytes than requested. For further details
see the L<pread(2)> system call.
-See also C<guestfs_pwrite>.");
+See also C<guestfs_pwrite>, C<guestfs_pread_device>.");
- ("part_init", (RErr, [Device "device"; String "parttype"]), 208, [],
+ ("part_init", (RErr, [Device "device"; String "parttype"], []), 208, [],
[InitEmpty, Always, TestRun (
[["part_init"; "/dev/sda"; "gpt"]])],
"create an empty partition table",
=back");
- ("part_add", (RErr, [Device "device"; String "prlogex"; Int64 "startsect"; Int64 "endsect"]), 209, [],
+ ("part_add", (RErr, [Device "device"; String "prlogex"; Int64 "startsect"; Int64 "endsect"], []), 209, [],
[InitEmpty, Always, TestRun (
[["part_init"; "/dev/sda"; "mbr"];
["part_add"; "/dev/sda"; "primary"; "1"; "-1"]]);
Creating a partition which covers the whole disk is not so easy.
Use C<guestfs_part_disk> to do that.");
- ("part_disk", (RErr, [Device "device"; String "parttype"]), 210, [DangerWillRobinson],
+ ("part_disk", (RErr, [Device "device"; String "parttype"], []), 210, [DangerWillRobinson],
[InitEmpty, Always, TestRun (
[["part_disk"; "/dev/sda"; "mbr"]]);
InitEmpty, Always, TestRun (
C<parttype> is the partition table type, usually C<mbr> or C<gpt>,
but other possible values are described in C<guestfs_part_init>.");
- ("part_set_bootable", (RErr, [Device "device"; Int "partnum"; Bool "bootable"]), 211, [],
+ ("part_set_bootable", (RErr, [Device "device"; Int "partnum"; Bool "bootable"], []), 211, [],
[InitEmpty, Always, TestRun (
[["part_disk"; "/dev/sda"; "mbr"];
["part_set_bootable"; "/dev/sda"; "1"; "true"]])],
Windows) to determine which partition to boot from. It is by
no means universally recognized.");
- ("part_set_name", (RErr, [Device "device"; Int "partnum"; String "name"]), 212, [],
+ ("part_set_name", (RErr, [Device "device"; Int "partnum"; String "name"], []), 212, [],
[InitEmpty, Always, TestRun (
[["part_disk"; "/dev/sda"; "gpt"];
["part_set_name"; "/dev/sda"; "1"; "thepartname"]])],
The partition name can only be set on certain types of partition
table. This works on C<gpt> but not on C<mbr> partitions.");
- ("part_list", (RStructList ("partitions", "partition"), [Device "device"]), 213, [],
+ ("part_list", (RStructList ("partitions", "partition"), [Device "device"], []), 213, [],
[], (* XXX Add a regression test for this. *)
"list partitions on a device",
"\
=back");
- ("part_get_parttype", (RString "parttype", [Device "device"]), 214, [],
+ ("part_get_parttype", (RString "parttype", [Device "device"], []), 214, [],
[InitEmpty, Always, TestOutput (
[["part_disk"; "/dev/sda"; "gpt"];
["part_get_parttype"; "/dev/sda"]], "gpt")],
values are possible, although unusual. See C<guestfs_part_init>
for a full list.");
- ("fill", (RErr, [Int "c"; Int "len"; Pathname "path"]), 215, [Progress],
- [InitBasicFS, Always, TestOutputBuffer (
- [["fill"; "0x63"; "10"; "/test"];
- ["read_file"; "/test"]], "cccccccccc")],
+ ("fill", (RErr, [Int "c"; Int "len"; Pathname "path"], []), 215, [Progress],
+ [InitScratchFS, Always, TestOutputBuffer (
+ [["fill"; "0x63"; "10"; "/fill"];
+ ["read_file"; "/fill"]], "cccccccccc")],
"fill a file with octets",
"\
This command creates a new file called C<path>. The initial
To create a file with a pattern of repeating bytes
use C<guestfs_fill_pattern>.");
- ("available", (RErr, [StringList "groups"]), 216, [],
+ ("available", (RErr, [StringList "groups"], []), 216, [],
[InitNone, Always, TestRun [["available"; ""]]],
"test availability of some parts of the API",
"\
=back");
- ("dd", (RErr, [Dev_or_Path "src"; Dev_or_Path "dest"]), 217, [],
- [InitBasicFS, Always, TestOutputBuffer (
- [["write"; "/src"; "hello, world"];
- ["dd"; "/src"; "/dest"];
- ["read_file"; "/dest"]], "hello, world")],
+ ("dd", (RErr, [Dev_or_Path "src"; Dev_or_Path "dest"], []), 217, [],
+ [InitScratchFS, Always, TestOutputBuffer (
+ [["mkdir"; "/dd"];
+ ["write"; "/dd/src"; "hello, world"];
+ ["dd"; "/dd/src"; "/dd/dest"];
+ ["read_file"; "/dd/dest"]], "hello, world")],
"copy from source to destination using dd",
"\
This command copies from one source device or file C<src>
than the source file or device, otherwise the copy will fail.
This command cannot do partial copies (see C<guestfs_copy_size>).");
- ("filesize", (RInt64 "size", [Pathname "file"]), 218, [],
- [InitBasicFS, Always, TestOutputInt (
- [["write"; "/file"; "hello, world"];
- ["filesize"; "/file"]], 12)],
+ ("filesize", (RInt64 "size", [Pathname "file"], []), 218, [],
+ [InitScratchFS, Always, TestOutputInt (
+ [["write"; "/filesize"; "hello, world"];
+ ["filesize"; "/filesize"]], 12)],
"return the size of the file in bytes",
"\
This command returns the size of C<file> in bytes.
C<guestfs_is_dir>, C<guestfs_is_file> etc.
To get the size of block devices, use C<guestfs_blockdev_getsize64>.");
- ("lvrename", (RErr, [String "logvol"; String "newlogvol"]), 219, [],
+ ("lvrename", (RErr, [String "logvol"; String "newlogvol"], []), 219, [],
[InitBasicFSonLVM, Always, TestOutputList (
[["lvrename"; "/dev/VG/LV"; "/dev/VG/LV2"];
["lvs"]], ["/dev/VG/LV2"])],
"\
Rename a logical volume C<logvol> with the new name C<newlogvol>.");
- ("vgrename", (RErr, [String "volgroup"; String "newvolgroup"]), 220, [],
+ ("vgrename", (RErr, [String "volgroup"; String "newvolgroup"], []), 220, [],
[InitBasicFSonLVM, Always, TestOutputList (
[["umount"; "/"];
["vg_activate"; "false"; "VG"];
"\
Rename a volume group C<volgroup> with the new name C<newvolgroup>.");
- ("initrd_cat", (RBufferOut "content", [Pathname "initrdpath"; String "filename"]), 221, [ProtocolLimitWarning],
+ ("initrd_cat", (RBufferOut "content", [Pathname "initrdpath"; String "filename"], []), 221, [ProtocolLimitWarning],
[InitISOFS, Always, TestOutputBuffer (
[["initrd_cat"; "/initrd"; "known-4"]], "abc\ndef\nghi")],
"list the contents of a single file in an initrd",
See also C<guestfs_initrd_list>.");
- ("pvuuid", (RString "uuid", [Device "device"]), 222, [],
+ ("pvuuid", (RString "uuid", [Device "device"], []), 222, [],
[],
"get the UUID of a physical volume",
"\
This command returns the UUID of the LVM PV C<device>.");
- ("vguuid", (RString "uuid", [String "vgname"]), 223, [],
+ ("vguuid", (RString "uuid", [String "vgname"], []), 223, [],
[],
"get the UUID of a volume group",
"\
This command returns the UUID of the LVM VG named C<vgname>.");
- ("lvuuid", (RString "uuid", [Device "device"]), 224, [],
+ ("lvuuid", (RString "uuid", [Device "device"], []), 224, [],
[],
"get the UUID of a logical volume",
"\
This command returns the UUID of the LVM LV C<device>.");
- ("vgpvuuids", (RStringList "uuids", [String "vgname"]), 225, [],
+ ("vgpvuuids", (RStringList "uuids", [String "vgname"], []), 225, [],
[],
"get the PV UUIDs containing the volume group",
"\
See also C<guestfs_vglvuuids>.");
- ("vglvuuids", (RStringList "uuids", [String "vgname"]), 226, [],
+ ("vglvuuids", (RStringList "uuids", [String "vgname"], []), 226, [],
[],
"get the LV UUIDs of all LVs in the volume group",
"\
See also C<guestfs_vgpvuuids>.");
- ("copy_size", (RErr, [Dev_or_Path "src"; Dev_or_Path "dest"; Int64 "size"]), 227, [Progress],
- [InitBasicFS, Always, TestOutputBuffer (
- [["write"; "/src"; "hello, world"];
- ["copy_size"; "/src"; "/dest"; "5"];
- ["read_file"; "/dest"]], "hello")],
+ ("copy_size", (RErr, [Dev_or_Path "src"; Dev_or_Path "dest"; Int64 "size"], []), 227, [Progress],
+ [InitScratchFS, Always, TestOutputBuffer (
+ [["mkdir"; "/copy_size"];
+ ["write"; "/copy_size/src"; "hello, world"];
+ ["copy_size"; "/copy_size/src"; "/copy_size/dest"; "5"];
+ ["read_file"; "/copy_size/dest"]], "hello")],
"copy size bytes from source to destination using dd",
"\
This command copies exactly C<size> bytes from one source device
Note this will fail if the source is too short or if the destination
is not large enough.");
- ("zero_device", (RErr, [Device "device"]), 228, [DangerWillRobinson; Progress],
+ ("zero_device", (RErr, [Device "device"], []), 228, [DangerWillRobinson; Progress],
[InitBasicFSonLVM, Always, TestRun (
[["zero_device"; "/dev/VG/LV"]])],
"write zeroes to an entire device",
with C<guestfs_zero> which just zeroes the first few blocks of
a device.");
- ("txz_in", (RErr, [FileIn "tarball"; Pathname "directory"]), 229, [Optional "xz"],
- [InitBasicFS, Always, TestOutput (
- [["txz_in"; "../images/helloworld.tar.xz"; "/"];
- ["cat"; "/hello"]], "hello\n")],
+ ("txz_in", (RErr, [FileIn "tarball"; Pathname "directory"], []), 229, [Optional "xz"],
+ [InitScratchFS, Always, TestOutput (
+ [["mkdir"; "/txz_in"];
+ ["txz_in"; "../images/helloworld.tar.xz"; "/txz_in"];
+ ["cat"; "/txz_in/hello"]], "hello\n")],
"unpack compressed tarball to directory",
"\
This command uploads and unpacks local file C<tarball> (an
I<xz compressed> tar file) into C<directory>.");
- ("txz_out", (RErr, [Pathname "directory"; FileOut "tarball"]), 230, [Optional "xz"],
+ ("txz_out", (RErr, [Pathname "directory"; FileOut "tarball"], []), 230, [Optional "xz"],
[],
"pack directory into compressed tarball",
"\
This command packs the contents of C<directory> and downloads
it to local file C<tarball> (as an xz compressed tar archive).");
- ("ntfsresize", (RErr, [Device "device"]), 231, [Optional "ntfsprogs"],
+ ("ntfsresize", (RErr, [Device "device"], []), 231, [Optional "ntfsprogs"],
[],
"resize an NTFS filesystem",
"\
This command resizes an NTFS filesystem, expanding or
shrinking it to the size of the underlying device.
+
+I<Note:> After the resize operation, the filesystem is marked
+as requiring a consistency check (for safety). You have to boot
+into Windows to perform this check and clear this condition.
+Furthermore, ntfsresize refuses to resize filesystems
+which have been marked in this way. So in effect it is
+not possible to call ntfsresize multiple times on a single
+filesystem without booting into Windows between each resize.
+
See also L<ntfsresize(8)>.");
- ("vgscan", (RErr, []), 232, [],
+ ("vgscan", (RErr, [], []), 232, [],
[InitEmpty, Always, TestRun (
[["vgscan"]])],
"rescan for LVM physical volumes, volume groups and logical volumes",
This rescans all block devices and rebuilds the list of LVM
physical volumes, volume groups and logical volumes.");
- ("part_del", (RErr, [Device "device"; Int "partnum"]), 233, [],
+ ("part_del", (RErr, [Device "device"; Int "partnum"], []), 233, [],
[InitEmpty, Always, TestRun (
[["part_init"; "/dev/sda"; "mbr"];
["part_add"; "/dev/sda"; "primary"; "1"; "-1"];
extended partition also deletes any logical partitions
it contains.");
- ("part_get_bootable", (RBool "bootable", [Device "device"; Int "partnum"]), 234, [],
+ ("part_get_bootable", (RBool "bootable", [Device "device"; Int "partnum"], []), 234, [],
[InitEmpty, Always, TestOutputTrue (
[["part_init"; "/dev/sda"; "mbr"];
["part_add"; "/dev/sda"; "primary"; "1"; "-1"];
See also C<guestfs_part_set_bootable>.");
- ("part_get_mbr_id", (RInt "idbyte", [Device "device"; Int "partnum"]), 235, [FishOutput FishOutputHexadecimal],
+ ("part_get_mbr_id", (RInt "idbyte", [Device "device"; Int "partnum"], []), 235, [FishOutput FishOutputHexadecimal],
[InitEmpty, Always, TestOutputInt (
[["part_init"; "/dev/sda"; "mbr"];
["part_add"; "/dev/sda"; "primary"; "1"; "-1"];
You will get undefined results for other partition table
types (see C<guestfs_part_get_parttype>).");
- ("part_set_mbr_id", (RErr, [Device "device"; Int "partnum"; Int "idbyte"]), 236, [],
+ ("part_set_mbr_id", (RErr, [Device "device"; Int "partnum"; Int "idbyte"], []), 236, [],
[], (* tested by part_get_mbr_id *)
"set the MBR type byte (ID byte) of a partition",
"\
You will get undefined results for other partition table
types (see C<guestfs_part_get_parttype>).");
- ("checksum_device", (RString "checksum", [String "csumtype"; Device "device"]), 237, [],
+ ("checksum_device", (RString "checksum", [String "csumtype"; Device "device"], []), 237, [],
[InitISOFS, Always, TestOutputFileMD5 (
[["checksum_device"; "md5"; "/dev/sdd"]],
"../images/test.iso")],
contents of the device named C<device>. For the types of
checksums supported see the C<guestfs_checksum> command.");
- ("lvresize_free", (RErr, [Device "lv"; Int "percent"]), 238, [Optional "lvm2"],
+ ("lvresize_free", (RErr, [Device "lv"; Int "percent"], []), 238, [Optional "lvm2"],
[InitNone, Always, TestRun (
[["part_disk"; "/dev/sda"; "mbr"];
["pvcreate"; "/dev/sda1"];
as much as possible, using all remaining free space in the volume
group.");
- ("aug_clear", (RErr, [String "augpath"]), 239, [Optional "augeas"],
+ ("aug_clear", (RErr, [String "augpath"], []), 239, [Optional "augeas"],
[], (* XXX Augeas code needs tests. *)
"clear Augeas path",
"\
Set the value associated with C<path> to C<NULL>. This
is the same as the L<augtool(1)> C<clear> command.");
- ("get_umask", (RInt "mask", []), 240, [FishOutput FishOutputOctal],
+ ("get_umask", (RInt "mask", [], []), 240, [FishOutput FishOutputOctal],
[InitEmpty, Always, TestOutputInt (
[["get_umask"]], 0o22)],
"get the current umask",
Return the current umask. By default the umask is C<022>
unless it has been set by calling C<guestfs_umask>.");
- ("debug_upload", (RErr, [FileIn "filename"; String "tmpname"; Int "mode"]), 241, [],
+ ("debug_upload", (RErr, [FileIn "filename"; String "tmpname"; Int "mode"], []), 241, [NotInDocs],
[],
"upload a file to the appliance (internal use only)",
"\
to look at the file C<daemon/debug.c> in the libguestfs source
to find out what it is for.");
- ("base64_in", (RErr, [FileIn "base64file"; Pathname "filename"]), 242, [],
- [InitBasicFS, Always, TestOutput (
- [["base64_in"; "../images/hello.b64"; "/hello"];
- ["cat"; "/hello"]], "hello\n")],
+ ("base64_in", (RErr, [FileIn "base64file"; Pathname "filename"], []), 242, [],
+ [InitScratchFS, Always, TestOutput (
+ [["base64_in"; "../images/hello.b64"; "/base64_in"];
+ ["cat"; "/base64_in"]], "hello\n")],
"upload base64-encoded data to file",
"\
This command uploads base64-encoded data from C<base64file>
to C<filename>.");
- ("base64_out", (RErr, [Pathname "filename"; FileOut "base64file"]), 243, [],
+ ("base64_out", (RErr, [Pathname "filename"; FileOut "base64file"], []), 243, [],
[],
"download file and encode as base64",
"\
This command downloads the contents of C<filename>, writing
it out to local file C<base64file> encoded as base64.");
- ("checksums_out", (RErr, [String "csumtype"; Pathname "directory"; FileOut "sumsfile"]), 244, [],
+ ("checksums_out", (RErr, [String "csumtype"; Pathname "directory"; FileOut "sumsfile"], []), 244, [],
[],
"compute MD5, SHAx or CRC checksum of files in a directory",
"\
backslash syntax. For more information, see the GNU
coreutils info file.");
- ("fill_pattern", (RErr, [String "pattern"; Int "len"; Pathname "path"]), 245, [Progress],
- [InitBasicFS, Always, TestOutputBuffer (
- [["fill_pattern"; "abcdefghijklmnopqrstuvwxyz"; "28"; "/test"];
- ["read_file"; "/test"]], "abcdefghijklmnopqrstuvwxyzab")],
+ ("fill_pattern", (RErr, [String "pattern"; Int "len"; Pathname "path"], []), 245, [Progress],
+ [InitScratchFS, Always, TestOutputBuffer (
+ [["fill_pattern"; "abcdefghijklmnopqrstuvwxyz"; "28"; "/fill_pattern"];
+ ["read_file"; "/fill_pattern"]], "abcdefghijklmnopqrstuvwxyzab")],
"fill a file with a repeating pattern of bytes",
"\
This function is like C<guestfs_fill> except that it creates
of bytes in C<pattern>. The pattern is truncated if necessary
to ensure the length of the file is exactly C<len> bytes.");
- ("write", (RErr, [Pathname "path"; BufferIn "content"]), 246, [ProtocolLimitWarning],
- [InitBasicFS, Always, TestOutput (
- [["write"; "/new"; "new file contents"];
- ["cat"; "/new"]], "new file contents");
- InitBasicFS, Always, TestOutput (
- [["write"; "/new"; "\nnew file contents\n"];
- ["cat"; "/new"]], "\nnew file contents\n");
- InitBasicFS, Always, TestOutput (
- [["write"; "/new"; "\n\n"];
- ["cat"; "/new"]], "\n\n");
- InitBasicFS, Always, TestOutput (
- [["write"; "/new"; ""];
- ["cat"; "/new"]], "");
- InitBasicFS, Always, TestOutput (
- [["write"; "/new"; "\n\n\n"];
- ["cat"; "/new"]], "\n\n\n");
- InitBasicFS, Always, TestOutput (
- [["write"; "/new"; "\n"];
- ["cat"; "/new"]], "\n")],
+ ("write", (RErr, [Pathname "path"; BufferIn "content"], []), 246, [ProtocolLimitWarning],
+ [InitScratchFS, Always, TestOutput (
+ [["write"; "/write"; "new file contents"];
+ ["cat"; "/write"]], "new file contents");
+ InitScratchFS, Always, TestOutput (
+ [["write"; "/write2"; "\nnew file contents\n"];
+ ["cat"; "/write2"]], "\nnew file contents\n");
+ InitScratchFS, Always, TestOutput (
+ [["write"; "/write3"; "\n\n"];
+ ["cat"; "/write3"]], "\n\n");
+ InitScratchFS, Always, TestOutput (
+ [["write"; "/write4"; ""];
+ ["cat"; "/write4"]], "");
+ InitScratchFS, Always, TestOutput (
+ [["write"; "/write5"; "\n\n\n"];
+ ["cat"; "/write5"]], "\n\n\n");
+ InitScratchFS, Always, TestOutput (
+ [["write"; "/write6"; "\n"];
+ ["cat"; "/write6"]], "\n")],
"create a new file",
"\
This call creates a file called C<path>. The content of the
file is the string C<content> (which can contain any 8 bit data).");
- ("pwrite", (RInt "nbytes", [Pathname "path"; BufferIn "content"; Int64 "offset"]), 247, [ProtocolLimitWarning],
- [InitBasicFS, Always, TestOutput (
- [["write"; "/new"; "new file contents"];
- ["pwrite"; "/new"; "data"; "4"];
- ["cat"; "/new"]], "new data contents");
- InitBasicFS, Always, TestOutput (
- [["write"; "/new"; "new file contents"];
- ["pwrite"; "/new"; "is extended"; "9"];
- ["cat"; "/new"]], "new file is extended");
- InitBasicFS, Always, TestOutput (
- [["write"; "/new"; "new file contents"];
- ["pwrite"; "/new"; ""; "4"];
- ["cat"; "/new"]], "new file contents")],
+ ("pwrite", (RInt "nbytes", [Pathname "path"; BufferIn "content"; Int64 "offset"], []), 247, [ProtocolLimitWarning],
+ [InitScratchFS, Always, TestOutput (
+ [["write"; "/pwrite"; "new file contents"];
+ ["pwrite"; "/pwrite"; "data"; "4"];
+ ["cat"; "/pwrite"]], "new data contents");
+ InitScratchFS, Always, TestOutput (
+ [["write"; "/pwrite2"; "new file contents"];
+ ["pwrite"; "/pwrite2"; "is extended"; "9"];
+ ["cat"; "/pwrite2"]], "new file is extended");
+ InitScratchFS, Always, TestOutput (
+ [["write"; "/pwrite3"; "new file contents"];
+ ["pwrite"; "/pwrite3"; ""; "4"];
+ ["cat"; "/pwrite3"]], "new file contents")],
"write to part of a file",
"\
This command writes to part of a file. It writes the data
to the file. This could even be 0, although short writes are
unlikely for regular files in ordinary circumstances.
-See also C<guestfs_pread>.");
+See also C<guestfs_pread>, C<guestfs_pwrite_device>.");
- ("resize2fs_size", (RErr, [Device "device"; Int64 "size"]), 248, [],
+ ("resize2fs_size", (RErr, [Device "device"; Int64 "size"], []), 248, [],
[],
"resize an ext2, ext3 or ext4 filesystem (with size)",
"\
This command is the same as C<guestfs_resize2fs> except that it
allows you to specify the new size (in bytes) explicitly.");
- ("pvresize_size", (RErr, [Device "device"; Int64 "size"]), 249, [Optional "lvm2"],
+ ("pvresize_size", (RErr, [Device "device"; Int64 "size"], []), 249, [Optional "lvm2"],
[],
"resize an LVM physical volume (with size)",
"\
This command is the same as C<guestfs_pvresize> except that it
allows you to specify the new size (in bytes) explicitly.");
- ("ntfsresize_size", (RErr, [Device "device"; Int64 "size"]), 250, [Optional "ntfsprogs"],
+ ("ntfsresize_size", (RErr, [Device "device"; Int64 "size"], []), 250, [Optional "ntfsprogs"],
[],
"resize an NTFS filesystem (with size)",
"\
This command is the same as C<guestfs_ntfsresize> except that it
allows you to specify the new size (in bytes) explicitly.");
- ("available_all_groups", (RStringList "groups", []), 251, [],
+ ("available_all_groups", (RStringList "groups", [], []), 251, [],
[InitNone, Always, TestRun [["available_all_groups"]]],
"return a list of all optional groups",
"\
See also C<guestfs_available> and L<guestfs(3)/AVAILABILITY>.");
- ("fallocate64", (RErr, [Pathname "path"; Int64 "len"]), 252, [],
- [InitBasicFS, Always, TestOutputStruct (
- [["fallocate64"; "/a"; "1000000"];
- ["stat"; "/a"]], [CompareWithInt ("size", 1_000_000)])],
+ ("fallocate64", (RErr, [Pathname "path"; Int64 "len"], []), 252, [],
+ [InitScratchFS, Always, TestOutputStruct (
+ [["fallocate64"; "/fallocate64"; "1000000"];
+ ["stat"; "/fallocate64"]], [CompareWithInt ("size", 1_000_000)])],
"preallocate a file in the guest filesystem",
"\
This command preallocates a file (containing zero bytes) named
C<alloc> and C<sparse> commands which create
a file in the host and attach it as a device.");
- ("vfs_label", (RString "label", [Device "device"]), 253, [],
+ ("vfs_label", (RString "label", [Device "device"], []), 253, [],
[InitBasicFS, Always, TestOutput (
[["set_e2label"; "/dev/sda1"; "LTEST"];
["vfs_label"; "/dev/sda1"]], "LTEST")],
To find a filesystem from the label, use C<guestfs_findfs_label>.");
- ("vfs_uuid", (RString "uuid", [Device "device"]), 254, [],
+ ("vfs_uuid", (RString "uuid", [Device "device"], []), 254, [],
(let uuid = uuidgen () in
[InitBasicFS, Always, TestOutput (
[["set_e2uuid"; "/dev/sda1"; uuid];
To find a filesystem from the UUID, use C<guestfs_findfs_uuid>.");
- ("lvm_set_filter", (RErr, [DeviceList "devices"]), 255, [Optional "lvm2"],
+ ("lvm_set_filter", (RErr, [DeviceList "devices"], []), 255, [Optional "lvm2"],
(* Can't be tested with the current framework because
* the VG is being used by the mounted filesystem, so
* the vgchange -an command we do first will fail.
contains a mounted filesystem), even if you are not
filtering out that VG.");
- ("lvm_clear_filter", (RErr, []), 256, [],
+ ("lvm_clear_filter", (RErr, [], []), 256, [],
[], (* see note on lvm_set_filter *)
"clear LVM device filter",
"\
This command also clears the LVM cache and performs a volume
group scan.");
- ("luks_open", (RErr, [Device "device"; Key "key"; String "mapname"]), 257, [Optional "luks"],
+ ("luks_open", (RErr, [Device "device"; Key "key"; String "mapname"], []), 257, [Optional "luks"],
[],
"open a LUKS-encrypted block device",
"\
calling C<guestfs_vgscan> followed by C<guestfs_vg_activate_all>
will make them visible.");
- ("luks_open_ro", (RErr, [Device "device"; Key "key"; String "mapname"]), 258, [Optional "luks"],
+ ("luks_open_ro", (RErr, [Device "device"; Key "key"; String "mapname"], []), 258, [Optional "luks"],
[],
"open a LUKS-encrypted block device read-only",
"\
This is the same as C<guestfs_luks_open> except that a read-only
mapping is created.");
- ("luks_close", (RErr, [Device "device"]), 259, [Optional "luks"],
+ ("luks_close", (RErr, [Device "device"], []), 259, [Optional "luks"],
[],
"close a LUKS device",
"\
device (ie. C</dev/mapper/mapname>) and I<not> the name
of the underlying block device.");
- ("luks_format", (RErr, [Device "device"; Key "key"; Int "keyslot"]), 260, [Optional "luks"; DangerWillRobinson],
+ ("luks_format", (RErr, [Device "device"; Key "key"; Int "keyslot"], []), 260, [Optional "luks"; DangerWillRobinson],
[],
"format a block device as a LUKS encrypted device",
"\
initial key, which is added to key slot C<slot>. (LUKS
supports 8 key slots, numbered 0-7).");
- ("luks_format_cipher", (RErr, [Device "device"; Key "key"; Int "keyslot"; String "cipher"]), 261, [Optional "luks"; DangerWillRobinson],
+ ("luks_format_cipher", (RErr, [Device "device"; Key "key"; Int "keyslot"; String "cipher"], []), 261, [Optional "luks"; DangerWillRobinson],
[],
"format a block device as a LUKS encrypted device",
"\
This command is the same as C<guestfs_luks_format> but
it also allows you to set the C<cipher> used.");
- ("luks_add_key", (RErr, [Device "device"; Key "key"; Key "newkey"; Int "keyslot"]), 262, [Optional "luks"],
+ ("luks_add_key", (RErr, [Device "device"; Key "key"; Key "newkey"; Int "keyslot"], []), 262, [Optional "luks"],
[],
"add a key on a LUKS encrypted device",
"\
command will fail. You have to use C<guestfs_luks_kill_slot>
first to remove that key.");
- ("luks_kill_slot", (RErr, [Device "device"; Key "key"; Int "keyslot"]), 263, [Optional "luks"],
+ ("luks_kill_slot", (RErr, [Device "device"; Key "key"; Int "keyslot"], []), 263, [Optional "luks"],
[],
"remove a key from a LUKS encrypted device",
"\
encrypted LUKS device C<device>. C<key> must be one of the
I<other> keys.");
- ("is_lv", (RBool "lvflag", [Device "device"]), 264, [Optional "lvm2"],
+ ("is_lv", (RBool "lvflag", [Device "device"], []), 264, [Optional "lvm2"],
[InitBasicFSonLVM, IfAvailable "lvm2", TestOutputTrue (
[["is_lv"; "/dev/VG/LV"]]);
InitBasicFSonLVM, IfAvailable "lvm2", TestOutputFalse (
This command tests whether C<device> is a logical volume, and
returns true iff this is the case.");
- ("findfs_uuid", (RString "device", [String "uuid"]), 265, [],
+ ("findfs_uuid", (RString "device", [String "uuid"], []), 265, [],
[],
"find a filesystem by UUID",
"\
To find the UUID of a filesystem, use C<guestfs_vfs_uuid>.");
- ("findfs_label", (RString "device", [String "label"]), 266, [],
+ ("findfs_label", (RString "device", [String "label"], []), 266, [],
[],
"find a filesystem by label",
"\
To find the label of a filesystem, use C<guestfs_vfs_label>.");
- ("is_chardev", (RBool "flag", [Pathname "path"]), 267, [],
+ ("is_chardev", (RBool "flag", [Pathname "path"], []), 267, [],
[InitISOFS, Always, TestOutputFalse (
[["is_chardev"; "/directory"]]);
- InitBasicFS, Always, TestOutputTrue (
- [["mknod_c"; "0o777"; "99"; "66"; "/test"];
- ["is_chardev"; "/test"]])],
+ InitScratchFS, Always, TestOutputTrue (
+ [["mknod_c"; "0o777"; "99"; "66"; "/is_chardev"];
+ ["is_chardev"; "/is_chardev"]])],
"test if character device",
"\
This returns C<true> if and only if there is a character device
See also C<guestfs_stat>.");
- ("is_blockdev", (RBool "flag", [Pathname "path"]), 268, [],
+ ("is_blockdev", (RBool "flag", [Pathname "path"], []), 268, [],
[InitISOFS, Always, TestOutputFalse (
[["is_blockdev"; "/directory"]]);
- InitBasicFS, Always, TestOutputTrue (
- [["mknod_b"; "0o777"; "99"; "66"; "/test"];
- ["is_blockdev"; "/test"]])],
+ InitScratchFS, Always, TestOutputTrue (
+ [["mknod_b"; "0o777"; "99"; "66"; "/is_blockdev"];
+ ["is_blockdev"; "/is_blockdev"]])],
"test if block device",
"\
This returns C<true> if and only if there is a block device
See also C<guestfs_stat>.");
- ("is_fifo", (RBool "flag", [Pathname "path"]), 269, [],
+ ("is_fifo", (RBool "flag", [Pathname "path"], []), 269, [],
[InitISOFS, Always, TestOutputFalse (
[["is_fifo"; "/directory"]]);
- InitBasicFS, Always, TestOutputTrue (
- [["mkfifo"; "0o777"; "/test"];
- ["is_fifo"; "/test"]])],
+ InitScratchFS, Always, TestOutputTrue (
+ [["mkfifo"; "0o777"; "/is_fifo"];
+ ["is_fifo"; "/is_fifo"]])],
"test if FIFO (named pipe)",
"\
This returns C<true> if and only if there is a FIFO (named pipe)
See also C<guestfs_stat>.");
- ("is_symlink", (RBool "flag", [Pathname "path"]), 270, [],
+ ("is_symlink", (RBool "flag", [Pathname "path"], []), 270, [],
[InitISOFS, Always, TestOutputFalse (
[["is_symlink"; "/directory"]]);
InitISOFS, Always, TestOutputTrue (
See also C<guestfs_stat>.");
- ("is_socket", (RBool "flag", [Pathname "path"]), 271, [],
+ ("is_socket", (RBool "flag", [Pathname "path"], []), 271, [],
(* XXX Need a positive test for sockets. *)
[InitISOFS, Always, TestOutputFalse (
[["is_socket"; "/directory"]])],
See also C<guestfs_stat>.");
+ ("part_to_dev", (RString "device", [Device "partition"], []), 272, [],
+ [InitPartition, Always, TestOutputDevice (
+ [["part_to_dev"; "/dev/sda1"]], "/dev/sda");
+ InitEmpty, Always, TestLastFail (
+ [["part_to_dev"; "/dev/sda"]])],
+ "convert partition name to device name",
+ "\
+This function takes a partition name (eg. \"/dev/sdb1\") and
+removes the partition number, returning the device name
+(eg. \"/dev/sdb\").
+
+The named partition must exist, for example as a string returned
+from C<guestfs_list_partitions>.");
+
+ ("upload_offset", (RErr, [FileIn "filename"; Dev_or_Path "remotefilename"; Int64 "offset"], []), 273, [Progress],
+ (let md5 = Digest.to_hex (Digest.file "COPYING.LIB") in
+ [InitScratchFS, Always, TestOutput (
+ [["upload_offset"; "../COPYING.LIB"; "/upload_offset"; "0"];
+ ["checksum"; "md5"; "/upload_offset"]], md5)]),
+ "upload a file from the local machine with offset",
+ "\
+Upload local file C<filename> to C<remotefilename> on the
+filesystem.
+
+C<remotefilename> is overwritten starting at the byte C<offset>
+specified. The intention is to overwrite parts of existing
+files or devices, although if a non-existant file is specified
+then it is created with a \"hole\" before C<offset>. The
+size of the data written is implicit in the size of the
+source C<filename>.
+
+Note that there is no limit on the amount of data that
+can be uploaded with this call, unlike with C<guestfs_pwrite>,
+and this call always writes the full amount unless an
+error occurs.
+
+See also C<guestfs_upload>, C<guestfs_pwrite>.");
+
+ ("download_offset", (RErr, [Dev_or_Path "remotefilename"; FileOut "filename"; Int64 "offset"; Int64 "size"], []), 274, [Progress],
+ (let md5 = Digest.to_hex (Digest.file "COPYING.LIB") in
+ let offset = string_of_int 100 in
+ let size = string_of_int ((Unix.stat "COPYING.LIB").Unix.st_size - 100) in
+ [InitScratchFS, Always, TestOutput (
+ (* Pick a file from cwd which isn't likely to change. *)
+ [["mkdir"; "/download_offset"];
+ ["upload"; "../COPYING.LIB"; "/download_offset/COPYING.LIB"];
+ ["download_offset"; "/download_offset/COPYING.LIB"; "testdownload.tmp"; offset; size];
+ ["upload_offset"; "testdownload.tmp"; "/download_offset/COPYING.LIB"; offset];
+ ["checksum"; "md5"; "/download_offset/COPYING.LIB"]], md5)]),
+ "download a file to the local machine with offset and size",
+ "\
+Download file C<remotefilename> and save it as C<filename>
+on the local machine.
+
+C<remotefilename> is read for C<size> bytes starting at C<offset>
+(this region must be within the file or device).
+
+Note that there is no limit on the amount of data that
+can be downloaded with this call, unlike with C<guestfs_pread>,
+and this call always reads the full amount unless an
+error occurs.
+
+See also C<guestfs_download>, C<guestfs_pread>.");
+
+ ("pwrite_device", (RInt "nbytes", [Device "device"; BufferIn "content"; Int64 "offset"], []), 275, [ProtocolLimitWarning],
+ [InitPartition, Always, TestOutputListOfDevices (
+ [["pwrite_device"; "/dev/sda"; "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"; "446"];
+ ["blockdev_rereadpt"; "/dev/sda"];
+ ["list_partitions"]], ["/dev/sdb1"])],
+ "write to part of a device",
+ "\
+This command writes to part of a device. It writes the data
+buffer C<content> to C<device> starting at offset C<offset>.
+
+This command implements the L<pwrite(2)> system call, and like
+that system call it may not write the full data requested
+(although short writes to disk devices and partitions are
+probably impossible with standard Linux kernels).
+
+See also C<guestfs_pwrite>.");
+
+ ("pread_device", (RBufferOut "content", [Device "device"; Int "count"; Int64 "offset"], []), 276, [ProtocolLimitWarning],
+ [InitEmpty, Always, TestOutputBuffer (
+ [["pread_device"; "/dev/sdd"; "8"; "32768"]], "\001CD001\001\000")],
+ "read part of a device",
+ "\
+This command lets you read part of a file. It reads C<count>
+bytes of C<device>, starting at C<offset>.
+
+This may read fewer bytes than requested. For further details
+see the L<pread(2)> system call.
+
+See also C<guestfs_pread>.");
+
+ ("lvm_canonical_lv_name", (RString "lv", [Device "lvname"], []), 277, [],
+ [InitBasicFSonLVM, IfAvailable "lvm2", TestOutput (
+ [["lvm_canonical_lv_name"; "/dev/mapper/VG-LV"]], "/dev/VG/LV");
+ InitBasicFSonLVM, IfAvailable "lvm2", TestOutput (
+ [["lvm_canonical_lv_name"; "/dev/VG/LV"]], "/dev/VG/LV")],
+ "get canonical name of an LV",
+ "\
+This converts alternative naming schemes for LVs that you
+might find to the canonical name. For example, C</dev/mapper/VG-LV>
+is converted to C</dev/VG/LV>.
+
+This command returns an error if the C<lvname> parameter does
+not refer to a logical volume.
+
+See also C<guestfs_is_lv>.");
+
+ ("mkfs_opts", (RErr, [String "fstype"; Device "device"], [Int "blocksize"; String "features"]), 278, [],
+ [InitEmpty, Always, TestOutput (
+ [["part_disk"; "/dev/sda"; "mbr"];
+ ["mkfs_opts"; "ext2"; "/dev/sda1"; "4096"; ""];
+ ["mount_options"; ""; "/dev/sda1"; "/"];
+ ["write"; "/new"; "new file contents"];
+ ["cat"; "/new"]], "new file contents")],
+ "make a filesystem",
+ "\
+This function creates a filesystem on C<device>. The filesystem
+type is C<fstype>, for example C<ext3>.
+
+The optional arguments are:
+
+=over 4
+
+=item C<blocksize>
+
+The filesystem block size. Supported block sizes depend on the
+filesystem type, but typically they are C<1024>, C<2048> or C<4096>
+for Linux ext2/3 filesystems.
+
+For VFAT and NTFS the C<blocksize> parameter is treated as
+the requested cluster size.
+
+For UFS block sizes, please see L<mkfs.ufs(8)>.
+
+=item C<features>
+
+This passes the I<-O> parameter to the external mkfs program.
+
+For certain filesystem types, this allows extra filesystem
+features to be selected. See L<mke2fs(8)> and L<mkfs.ufs(8)>
+for more details.
+
+You cannot use this optional parameter with the C<gfs> or
+C<gfs2> filesystem type.
+
+=back");
+
+ ("getxattr", (RBufferOut "xattr", [Pathname "path"; String "name"], []), 279, [Optional "linuxxattrs"],
+ [],
+ "get a single extended attribute",
+ "\
+Get a single extended attribute from file C<path> named C<name>.
+This call follows symlinks. If you want to lookup an extended
+attribute for the symlink itself, use C<guestfs_lgetxattr>.
+
+Normally it is better to get all extended attributes from a file
+in one go by calling C<guestfs_getxattrs>. However some Linux
+filesystem implementations are buggy and do not provide a way to
+list out attributes. For these filesystems (notably ntfs-3g)
+you have to know the names of the extended attributes you want
+in advance and call this function.
+
+Extended attribute values are blobs of binary data. If there
+is no extended attribute named C<name>, this returns an error.
+
+See also: C<guestfs_getxattrs>, C<guestfs_lgetxattr>, L<attr(5)>.");
+
+ ("lgetxattr", (RBufferOut "xattr", [Pathname "path"; String "name"], []), 280, [Optional "linuxxattrs"],
+ [],
+ "get a single extended attribute",
+ "\
+Get a single extended attribute from file C<path> named C<name>.
+If C<path> is a symlink, then this call returns an extended
+attribute from the symlink.
+
+Normally it is better to get all extended attributes from a file
+in one go by calling C<guestfs_getxattrs>. However some Linux
+filesystem implementations are buggy and do not provide a way to
+list out attributes. For these filesystems (notably ntfs-3g)
+you have to know the names of the extended attributes you want
+in advance and call this function.
+
+Extended attribute values are blobs of binary data. If there
+is no extended attribute named C<name>, this returns an error.
+
+See also: C<guestfs_lgetxattrs>, C<guestfs_getxattr>, L<attr(5)>.");
+
+ ("resize2fs_M", (RErr, [Device "device"], []), 281, [],
+ [],
+ "resize an ext2, ext3 or ext4 filesystem to the minimum size",
+ "\
+This command is the same as C<guestfs_resize2fs>, but the filesystem
+is resized to its minimum size. This works like the I<-M> option
+to the C<resize2fs> command.
+
+To get the resulting size of the filesystem you should call
+C<guestfs_tune2fs_l> and read the C<Block size> and C<Block count>
+values. These two numbers, multiplied together, give the
+resulting size of the minimal filesystem in bytes.");
+
+ ("internal_autosync", (RErr, [], []), 282, [NotInFish; NotInDocs],
+ [],
+ "internal autosync operation",
+ "\
+This command performs the autosync operation just before the
+handle is closed. You should not call this command directly.
+Instead, use the autosync flag (C<guestfs_set_autosync>) to
+control whether or not this operation is performed when the
+handle is closed.");
+
]
let all_functions = non_daemon_functions @ daemon_functions
(* In some places we want the functions to be displayed sorted
* alphabetically, so this is useful:
*)
-let all_functions_sorted =
- List.sort (fun (n1,_,_,_,_,_,_) (n2,_,_,_,_,_,_) ->
- compare n1 n2) all_functions
+let all_functions_sorted = List.sort action_compare all_functions
(* This is used to generate the src/MAX_PROC_NR file which
* contains the maximum procedure number, a surrogate for the
fun (_, _, proc_nr, _, _, _, _) -> proc_nr
) daemon_functions in
List.fold_left max 0 proc_nrs
+
+(* Non-API meta-commands available only in guestfish.
+ *
+ * Note (1): style, proc_nr and tests fields are all meaningless.
+ * The only fields which are actually used are the shortname,
+ * FishAlias flags, shortdesc and longdesc.
+ *
+ * Note (2): to refer to other commands, use L</shortname>.
+ *
+ * Note (3): keep this list sorted by shortname.
+ *)
+let fish_commands = [
+ ("alloc", (RErr,[], []), -1, [FishAlias "allocate"], [],
+ "allocate and add a disk file",
+ " alloc filename size
+
+This creates an empty (zeroed) file of the given size, and then adds
+so it can be further examined.
+
+For more advanced image creation, see L<qemu-img(1)> utility.
+
+Size can be specified using standard suffixes, eg. C<1M>.
+
+To create a sparse file, use L</sparse> instead. To create a
+prepared disk image, see L</PREPARED DISK IMAGES>.");
+
+ ("copy_in", (RErr,[], []), -1, [], [],
+ "copy local files or directories into an image",
+ " copy-in local [local ...] /remotedir
+
+C<copy-in> copies local files or directories recursively into the disk
+image, placing them in the directory called C</remotedir> (which must
+exist). This guestfish meta-command turns into a sequence of
+L</tar-in> and other commands as necessary.
+
+Multiple local files and directories can be specified, but the last
+parameter must always be a remote directory. Wildcards cannot be
+used.");
+
+ ("copy_out", (RErr,[], []), -1, [], [],
+ "copy remote files or directories out of an image",
+ " copy-out remote [remote ...] localdir
+
+C<copy-out> copies remote files or directories recursively out of the
+disk image, placing them on the host disk in a local directory called
+C<localdir> (which must exist). This guestfish meta-command turns
+into a sequence of L</download>, L</tar-out> and other commands as
+necessary.
+
+Multiple remote files and directories can be specified, but the last
+parameter must always be a local directory. To download to the
+current directory, use C<.> as in:
+
+ copy-out /home .
+
+Wildcards cannot be used in the ordinary command, but you can use
+them with the help of L</glob> like this:
+
+ glob copy-out /home/* .");
+
+ ("echo", (RErr,[], []), -1, [], [],
+ "display a line of text",
+ " echo [params ...]
+
+This echos the parameters to the terminal.");
+
+ ("edit", (RErr,[], []), -1, [FishAlias "vi"; FishAlias "emacs"], [],
+ "edit a file",
+ " edit filename
+
+This is used to edit a file. It downloads the file, edits it
+locally using your editor, then uploads the result.
+
+The editor is C<$EDITOR>. However if you use the alternate
+commands C<vi> or C<emacs> you will get those corresponding
+editors.");
+
+ ("glob", (RErr,[], []), -1, [], [],
+ "expand wildcards in command",
+ " glob command args...
+
+Expand wildcards in any paths in the args list, and run C<command>
+repeatedly on each matching path.
+
+See L</WILDCARDS AND GLOBBING>.");
+
+ ("hexedit", (RErr,[], []), -1, [], [],
+ "edit with a hex editor",
+ " hexedit <filename|device>
+ hexedit <filename|device> <max>
+ hexedit <filename|device> <start> <max>
+
+Use hexedit (a hex editor) to edit all or part of a binary file
+or block device.
+
+This command works by downloading potentially the whole file or
+device, editing it locally, then uploading it. If the file or
+device is large, you have to specify which part you wish to edit
+by using C<max> and/or C<start> C<max> parameters.
+C<start> and C<max> are specified in bytes, with the usual
+modifiers allowed such as C<1M> (1 megabyte).
+
+For example to edit the first few sectors of a disk you
+might do:
+
+ hexedit /dev/sda 1M
+
+which would allow you to edit anywhere within the first megabyte
+of the disk.
+
+To edit the superblock of an ext2 filesystem on C</dev/sda1>, do:
+
+ hexedit /dev/sda1 0x400 0x400
+
+(assuming the superblock is in the standard location).
+
+This command requires the external L<hexedit(1)> program. You
+can specify another program to use by setting the C<HEXEDITOR>
+environment variable.
+
+See also L</hexdump>.");
+
+ ("lcd", (RErr,[], []), -1, [], [],
+ "change working directory",
+ " lcd directory
+
+Change the local directory, ie. the current directory of guestfish
+itself.
+
+Note that C<!cd> won't do what you might expect.");
+
+ ("man", (RErr,[], []), -1, [FishAlias "manual"], [],
+ "open the manual",
+ " man
+
+Opens the manual page for guestfish.");
+
+ ("more", (RErr,[], []), -1, [FishAlias "less"], [],
+ "view a file",
+ " more filename
+
+ less filename
+
+This is used to view a file.
+
+The default viewer is C<$PAGER>. However if you use the alternate
+command C<less> you will get the C<less> command specifically.");
+
+ ("reopen", (RErr,[], []), -1, [], [],
+ "close and reopen libguestfs handle",
+ " reopen
+
+Close and reopen the libguestfs handle. It is not necessary to use
+this normally, because the handle is closed properly when guestfish
+exits. However this is occasionally useful for testing.");
+
+ ("sparse", (RErr,[], []), -1, [], [],
+ "create a sparse disk image and add",
+ " sparse filename size
+
+This creates an empty sparse file of the given size, and then adds
+so it can be further examined.
+
+In all respects it works the same as the L</alloc> command, except that
+the image file is allocated sparsely, which means that disk blocks are
+not assigned to the file until they are needed. Sparse disk files
+only use space when written to, but they are slower and there is a
+danger you could run out of real disk space during a write operation.
+
+For more advanced image creation, see L<qemu-img(1)> utility.
+
+Size can be specified using standard suffixes, eg. C<1M>.");
+
+ ("supported", (RErr,[], []), -1, [], [],
+ "list supported groups of commands",
+ " supported
+
+This command returns a list of the optional groups
+known to the daemon, and indicates which ones are
+supported by this build of the libguestfs appliance.
+
+See also L<guestfs(3)/AVAILABILITY>.");
+
+ ("time", (RErr,[], []), -1, [], [],
+ "print elapsed time taken to run a command",
+ " time command args...
+
+Run the command as usual, but print the elapsed time afterwards. This
+can be useful for benchmarking operations.");
+
+]