+
+#: tools/virt-edit.pl:169
+msgid "virt-edit: no image, VM names or filenames to edit given"
+msgstr ""
+
+#: tools/virt-edit.pl:185 tools/virt-tar.pl:238 tools/virt-win-reg.pl:292
+#, perl-brace-format
+msgid ""
+"{prog}: No operating system could be detected inside this disk image.\n"
+"\n"
+"This may be because the file is not a disk image, or is not a virtual "
+"machine\n"
+"image, or because the OS type is not understood by libguestfs.\n"
+"\n"
+"If you feel this is an error, please file a bug report including as much\n"
+"information about the disk image as possible.\n"
+msgstr ""
+
+#: tools/virt-edit.pl:189 tools/virt-tar.pl:242 tools/virt-win-reg.pl:296
+#, perl-brace-format
+msgid "{prog}: multiboot operating systems are not supported.\n"
+msgstr ""
+
+#: tools/virt-edit.pl:221
+msgid "File not changed.\n"
+msgstr ""
+
+#: tools/virt-list-filesystems.pl:142
+msgid "virt-list-filesystems: no image or VM name given"
+msgstr ""
+
+#: tools/virt-list-partitions.pl:152
+msgid "virt-list-partitions: no image or VM name given"
+msgstr ""
+
+#: tools/virt-make-fs.pl:291
+msgid "virt-make-fs input output\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:321
+msgid "unexpected output from 'du' command"
+msgstr ""
+
+#: tools/virt-make-fs.pl:333 tools/virt-make-fs.pl:347
+#: tools/virt-make-fs.pl:453
+#, perl-brace-format
+msgid "{f}: unknown input format: {fmt}\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:391
+#, perl-brace-format
+msgid "virt-make-fs: cannot parse size parameter: {sz}\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:401
+#, fuzzy
+msgid ""
+"qemu-img create: failed to create disk image, see earlier error messages\n"
+msgstr "guestfs_launch విఫలమైంది, ముందలి దోషపు సందేశములను చూడుము"
+
+#: tools/virt-make-fs.pl:412
+msgid "virt-make-fs: NTFS support was disabled when libguestfs was compiled\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:437
+#, fuzzy
+msgid "tar: failed, see earlier messages\n"
+msgstr "guestfs_launch విఫలమైంది, ముందలి దోషపు సందేశములను చూడుము"
+
+#: tools/virt-make-fs.pl:459
+#, fuzzy
+msgid "uncompress command failed, see earlier messages\n"
+msgstr "guestfs_launch విఫలమైంది, ముందలి దోషపు సందేశములను చూడుము"
+
+#: tools/virt-make-fs.pl:494
+msgid ""
+"virt-make-fs: error copying contents into filesystem\n"
+"An error here usually means that the program did not estimate the\n"
+"filesystem size correctly. Please read the BUGS section of the manpage.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:33
+msgid "virt-resize: sorry this program does not work on a 32 bit host\n"
+msgstr ""
+
+#: tools/virt-resize.pl:583
+#, fuzzy, perl-brace-format
+msgid "virt-resize: {file}: does not exist or is not readable\n"
+msgstr "బెనరీ '%s' లేదు లేదా అది నిర్వర్తించదగునది కాదు\n"
+
+#: tools/virt-resize.pl:585
+#, perl-brace-format
+msgid ""
+"virt-resize: {file}: does not exist or is not writable\n"
+"You have to create the destination disk before running this program.\n"
+"Please read the virt-resize(1) manpage for more information.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:664 tools/virt-resize.pl:667
+#, perl-brace-format
+msgid ""
+"virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n"
+msgstr ""
+
+#: tools/virt-resize.pl:683 tools/virt-resize.pl:695
+msgid "virt-resize: short read"
+msgstr ""
+
+#: tools/virt-resize.pl:829
+#, fuzzy, perl-brace-format
+msgid "virt-resize: no logical volume called {n}\n"
+msgstr "LVM తార్కిక వాల్యూమ్ పునఃపరిమాణము చేయుము"
+
+#: tools/virt-resize.pl:849
+#, perl-brace-format
+msgid ""
+"{p}: partition not found in the source disk image, when using the '{opt}' "
+"command line option\n"
+msgstr ""
+
+#: tools/virt-resize.pl:855
+#, perl-brace-format
+msgid ""
+"{p}: partition ignored, you cannot use it in another command line argument\n"
+msgstr ""
+
+#: tools/virt-resize.pl:859
+#, perl-brace-format
+msgid ""
+"{p}: partition deleted, you cannot use it in another command line argument\n"
+msgstr ""
+
+#: tools/virt-resize.pl:901
+#, perl-brace-format
+msgid "{p}: this partition has already been marked for resizing\n"
+msgstr ""
+
+#: tools/virt-resize.pl:909
+#, perl-brace-format
+msgid "{p}: missing size field in {o} option\n"
+msgstr ""
+
+#: tools/virt-resize.pl:926
+#, perl-brace-format
+msgid "{p}: {f}: cannot parse size field\n"
+msgstr ""
+
+#: tools/virt-resize.pl:931
+#, perl-brace-format
+msgid "{p}: new size is zero or negative\n"
+msgstr ""
+
+#: tools/virt-resize.pl:954
+#, perl-brace-format
+msgid ""
+"{p}: cannot make this partition smaller because it contains a\n"
+"filesystem, physical volume or other content that is larger than the new "
+"size.\n"
+"You have to resize the content first, see virt-resize(1).\n"
+msgstr ""
+
+#: tools/virt-resize.pl:970
+msgid "virt-resize: you cannot use options --expand and --shrink together\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1019
+#, perl-brace-format
+msgid ""
+"virt-resize: error: cannot use --expand when there is no surplus space to\n"
+"expand into. You need to make the target disk larger by at least {h}.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1034
+msgid ""
+"virt-resize: error: cannot use --shrink because there is no deficit\n"
+"(see 'deficit' in the virt-resize(1) man page)\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1049
+msgid "Summary of changes:\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1053
+#, perl-brace-format
+msgid "{p}: partition will be ignored\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1055
+#, perl-brace-format
+msgid "{p}: partition will be deleted\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1057
+#, perl-brace-format
+msgid "{p}: partition will be resized from {oldsize} to {newsize}\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1062
+#, perl-brace-format
+msgid "{p}: content will be expanded using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1067
+#, perl-brace-format
+msgid "{p}: partition will be left alone\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1072
+#, perl-brace-format
+msgid "{n}: LV will be expanded to maximum size\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1078
+#, perl-brace-format
+msgid "{n}: content will be expanded using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1085
+#, perl-brace-format
+msgid "There is a surplus of {spl} bytes ({h}).\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1090
+msgid "An extra partition will be created for the surplus.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1092
+msgid ""
+"The surplus space is not large enough for an extra partition to be created\n"
+"and so it will just be ignored.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1095
+msgid ""
+"The surplus space will be ignored. Run a partitioning program in the guest\n"
+"to partition this extra space if you want.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1098
+#, perl-brace-format
+msgid ""
+"virt-resize: error: there is a deficit of {def} bytes ({h}).\n"
+"You need to make the target disk larger by at least this amount,\n"
+"or adjust your resizing requests.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1115
+msgid "virt-resize: source disk does not have a first partition\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1210
+#, perl-brace-format
+msgid "Copying {p} ...\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1273 tools/virt-resize.pl:1331
+#, perl-brace-format
+msgid "Expanding {p} using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-tar.pl:178 tools/virt-tar.pl:185
+msgid "virt-tar: extract/upload mode specified twice on the command line\n"
+msgstr ""
+
+#: tools/virt-tar.pl:207
+msgid "virt-tar: no image, VM names, directory or filename given"
+msgstr ""
+
+#: tools/virt-tar.pl:210
+msgid "virt-tar: either -x or -u must be specified on the command line\n"
+msgstr ""
+
+#: tools/virt-tar.pl:221
+#, perl-brace-format
+msgid "virt-tar: {tarball}: file not found\n"
+msgstr ""
+
+#: tools/virt-tar.pl:224
+#, perl-brace-format
+msgid "virt-tar: {dir}: directory name must start with '/' character\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:276
+msgid "no libvirt domain name or disk image given\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:315
+msgid ""
+"expecting 1 or 2 more parameters, subkey path and optionally the value to "
+"export\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:426
+#, perl-brace-format
+msgid "virt-win-reg: {p}: not a supported Windows Registry path\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:443 tools/virt-win-reg.pl:465
+#, perl-brace-format
+msgid "virt-win-reg: {p}: file not found in guest: {err}\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:450
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not download registry file: {err}\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:472
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not upload registry file: {err}\n"
+msgstr ""
+
+#, fuzzy
+#~ msgid "virt-df: cannot use -h and --csv options together\n"
+#~ msgstr "%s: ఒకే సమయంలో --listen మరియు --file ఐచ్చికాలను వుపయోగించలేము\n"
+
+#, fuzzy
+#~ msgid " Mountpoints:\n"
+#~ msgstr "మౌంట్పాయింట్లను చూపుము"
+
+#, fuzzy
+#~ msgid " Filesystems:\n"
+#~ msgstr "ఫైల్సిస్టమ్ చేయుము"
+
+#~ msgid "allocate an image"
+#~ msgstr "ప్రతిబింబమును కేటాయించుము"
+
+#~ msgid "edit a file in the image"
+#~ msgstr "ప్రతిబింబము నందలి ఫైలును సరికూర్చుము"
+
+#~ msgid "view a file in the pager"
+#~ msgstr "పేజర్ నందలి ఫైలును దర్శించుము"
+
+#~ msgid ""
+#~ "echo - display a line of text\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " This echos the parameters to the terminal.\n"
+#~ msgstr ""
+#~ "echo - పాఠ్యపు వరుసను ప్రదర్శించును\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " ఇది పారామితులను టెర్మినల్పై చూపిస్తుంది.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "edit - edit a file in the image\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " This is used to edit a file.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\", editing locally, and then \"write\".\n"
+#~ "\n"
+#~ " Normally it uses $EDITOR, but if you use the aliases\n"
+#~ " \"vi\" or \"emacs\" you will get those editors.\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "edit - ప్రతిబింబమునందలి వొక ఫైలును సరికూర్చుము\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " ఒక ఫైలును సరికూర్చుటకు వుపయోగపడును.\n"
+#~ "\n"
+#~ " ఇది \"cat\" నడుపుటకు సరిసమానం, స్థానికంగా మార్చి, అప్పుడు \"write-file\".\n"
+#~ "\n"
+#~ " సాధారణంగా యిది $EDITOR వుపయోగించును, మీరు ఎలియాసెస్\n"
+#~ " \"vi\" లేదా \"emacs\" వుపయోగించితే మీరు ఆ సరికూర్పరిలు పొందుతారు.\n"
+#~ "\n"
+#~ " గమనిక: ఇది పెద్ద ఫైళ్ళు (> 2 MB)కు లేదా \\0 బైట్లు కలిగివున్న బైనరీ ఫైళ్ళకు\n"
+#~ " యిది నమ్మకంగా పనిచేయదు.\n"
+
+#~ msgid ""
+#~ "lcd - local change directory\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " Change guestfish's current directory. This command is\n"
+#~ " useful if you want to download files to a particular\n"
+#~ " place.\n"
+#~ msgstr ""
+#~ "lcd - స్థానిక చేంజ్ డైరెక్టరీ\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " guestfish యొక్క ప్రస్తుత డైరెక్టరీను మార్చును. మీరు ఫైళ్ళను ఫలానా స్థానమునకు డౌనులోడు\n"
+#~ " చేయవలెనంటే ఈ ఆదేశము వుపయోగకరంగా వుంటుంది.\n"
+
+#~ msgid ""
+#~ "glob - expand wildcards in command\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob runs <command> with wildcards expanded in any\n"
+#~ " command args. Note that the command is run repeatedly\n"
+#~ " once for each expanded argument.\n"
+#~ msgstr ""
+#~ "glob - ఆదేశమునందలి వైల్డుకార్డ్సును విస్తరింపచేయును\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob అనునది యేదేని ఆదేశ args నందు విస్తరింపచేసిన వైల్డుకార్డ్సుతో <command> "
+#~ "నడుచును. ప్రతి విస్తరిత ఆర్గుమెంటు కొరకు ఈ ఆదేశము ఆవృతంగా\n"
+#~ " వొకసారి నడుచునని గమనించండి.\n"
+
+#~ msgid ""
+#~ "more - view a file in the pager\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " This is used to view a file in the pager.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\" and using the pager.\n"
+#~ "\n"
+#~ " Normally it uses $PAGER, but if you use the alias\n"
+#~ " \"less\" then it always uses \"less\".\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "more - ఫైలును పేజర్నందు దర్శింపచేయును\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " ఫైలును పేజర్నందు దర్శించుటకు యిది వుపయోగించబడును\n"
+#~ "\n"
+#~ " ఇది \"cat\"ను నడుపుటకు మరియు పేజర్ను వుపయోగించుటకు\n"
+#~ " సరిసమానము.\n"
+#~ "\n"
+#~ " సాధారణంగా యిది $PAGER వుపయోగిస్తుంది, అయితే మీరు ఎలియాస్\n"
+#~ " \"less\" వుపయోగిస్తే అప్పుడు యిది యెల్లప్పుడు \"less\" వుపయోగించును.\n"
+#~ "\n"
+#~ " గమనిక: ఇది పెద్ద ఫైళ్ళు (> 2 MB) కొరకు నమ్మకంగా పనిచేయదు\n"
+#~ " లేదా \\0 బైట్లను కలిగివున్న బైనరీ ఫైళ్ళ కొరకు.\n"
+
+#~ msgid ""
+#~ "reopen - close and reopen the libguestfs handle\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
+#~ "this normally, because the handle is closed properly when guestfish\n"
+#~ "exits. However this is occasionally useful for testing.\n"
+#~ msgstr ""
+#~ "reopen - libguestfs సంభాలికను మూయును మరియు తెరువును\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "libguestfs సంభాలికను మూయును మరియు తెరువును సాధారణంగా దీనిని వుపయోగించుట తప్పనిసరికాదు,\n"
+#~ "యెంచేతంటే guestfish నిష్క్రమించగానే సంభాలిక మూయబడును\n"
+#~ " పరిశీలన కొరకు యిది అరుదుగా వుపయోగించుబడును.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "sparse - allocate a sparse image file\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty sparse file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " In all respects it works the same as the 'alloc'\n"
+#~ " command, except that the image file is allocated\n"
+#~ " sparsely, which means that disk blocks are not assigned\n"
+#~ " to the file until they are needed. Sparse disk files\n"
+#~ " only use space when written to, but they are slower\n"
+#~ " and there is a danger you could run out of real disk\n"
+#~ " space during a write operation.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
+#~ msgstr ""
+#~ "sparse - స్పార్శ్ ప్రతిబింబ దస్త్రాన్ని కేటాయించును\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " ఇది యిచ్చిన పరిమాణం యొక్క ఖాళీ స్పార్శ్ ఫైలును సృష్టించును,\n"
+#~ " మరియు దానిని జతచేయును తద్వారా తరువాత పరీక్షించబడును.\n"
+#~ "\n"
+#~ " ఇది 'alloc' వలె పనిచేయును,\n"
+#~ " ప్రతిబింబ ఫైలు పార్శింగ్కు కేటాయించబడుట తప్పించి,\n"
+#~ " దీనర్దం డిస్కు బ్లాకులు అవి అవసరమగునంత వరకు ఫైలుకు చేర్చబడవు.\n"
+#~ " వ్రాయునప్పుడు స్పార్శ్ డిస్కు ఫైళ్ళు\n"
+#~ " మాత్రమే వుపయోగించబడును, అయితే ఆ సందర్భములు మీరు వాస్తవ డిస్కు\n"
+#~ " జాగాను పూర్తిచేయు ప్రమాదం వుంది.\n"
+#~ "\n"
+#~ " మరింత అధునాతన ప్రతిబింబ సృష్టీకరణ కొరకు, qemu-img చూడండి.\n"
+#~ "\n"
+#~ " పరిమాణము తెలుపవచ్చును (ఇచట <nn> అంటే సంఖ్య):\n"
+#~ " <nn> కిలోబైట్ల సంఖ్య\n"
+#~ " eg: 1440 ప్రామాణిక 3.5\" floppy\n"
+#~ " <nn>K లేదా <nn>KB కిలోబైట్ల సంఖ్య\n"
+#~ " <nn>M లేదా <nn>MB మెగాబైట్ల సంఖ్య\n"
+#~ " <nn>G లేదా <nn>GB గిగాబైట్ల సంఖ్య\n"
+#~ " <nn>T లేదా <nn>TB టెరాబైట్ల సంఖ్య\n"
+#~ " <nn>P లేదా <nn>PB పెటాబైట్ల సంఖ్య\n"
+#~ " <nn>E లేదా <nn>EB హెగ్జాబైట్ల సంఖ్య\n"
+#~ " <nn>sects 512 బైట్ సెక్టార్ల సంఖ్య\n"
+
+#~ msgid ""
+#~ "time - measure time taken to run command\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " This runs <command> as usual, and prints the elapsed\n"
+#~ " time afterwards.\n"
+#~ msgstr ""
+#~ "time - ఆదేశాన్ని నడుపుటకు తీసుకొన్న సమయాన్ని లెక్కిస్తుంది\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " ఇది సాధారణంగానే <command> నడుస్తుంది, మరియు పట్టిన సమయాన్ని తర్వాత\n"
+#~ " ముద్రిస్తుంది.\n"
+
+#~ msgid "external command failed: %s"
+#~ msgstr "బహిర్గత ఆదేశము విఫలమైంది: %s"
+
+#~ msgid "test if file exists"
+#~ msgstr "ఫైలు వుంటే పరిశీలించుము"
+
+#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
+#~ msgstr "%s లేదా %sను LIBGUESTFS_PATH (current path = %s) పై కనుగొనలేదు"
+
+#~ msgid "failed to connect to vmchannel socket"
+#~ msgstr "vmchannel సాకెట్కు అనుసంధానమగుటలో విఫలమైంది"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
+#~ "selinux\n"
+#~ msgstr "%s: -i ఐచ్చికాన్ని -a, -m, --listen, --remote లేదా --selinuxతో వాడలేము\n"
+
+#, fuzzy
+#~ msgid "cpio command failed: {error}"
+#~ msgstr "ఆదేశము విఫలమైంది: %s"
+
+#~ msgid ""
+#~ "alloc - allocate an image\n"
+#~ " alloc <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty (zeroed) file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified (where <nn> means a number):\n"
+#~ " <nn> number of kilobytes\n"
+#~ " eg: 1440 standard 3.5\" floppy\n"
+#~ " <nn>K or <nn>KB number of kilobytes\n"
+#~ " <nn>M or <nn>MB number of megabytes\n"
+#~ " <nn>G or <nn>GB number of gigabytes\n"
+#~ " <nn>T or <nn>TB number of terabytes\n"
+#~ " <nn>P or <nn>PB number of petabytes\n"
+#~ " <nn>E or <nn>EB number of exabytes\n"
+#~ " <nn>sects number of 512 byte sectors\n"
+#~ msgstr ""
+#~ "alloc - ఒక ప్రతిబింబమును కేటాయించును\n"
+#~ " alloc <filename> <size>\n"
+#~ "\n"
+#~ " ఇది యిచ్చిన పరిమాణం యొక్క ఖాళీ (సున్నా) ఫైలును సృష్టించును,\n"
+#~ " మరియు దానిని జతచేయును తద్వారా తరువాత పరీక్షించబడును.\n"
+#~ "\n"
+#~ " మరింత అధునాతన ప్రతిబింబ సృష్టీకరణ కొరకు, qemu-img సౌలభ్యనును చూడుము.\n"
+#~ "\n"
+#~ " పరిమాణము తెలుపవచ్చును (ఇచట <nn> అంటే సంఖ్య):\n"
+#~ " <nn> కిలోబైట్ల సంఖ్య\n"
+#~ " eg: 1440 ప్రామాణిక 3.5\" floppy\n"
+#~ " <nn>K లేదా <nn>KB కిలోబైట్ల సంఖ్య\n"
+#~ " <nn>M లేదా <nn>MB మెగాబైట్ల సంఖ్య\n"
+#~ " <nn>G లేదా <nn>GB గిగాబైట్ల సంఖ్య\n"
+#~ " <nn>T లేదా <nn>TB టెరాబైట్ల సంఖ్య\n"
+#~ " <nn>P లేదా <nn>PB పెటాబైట్ల సంఖ్య\n"
+#~ " <nn>E లేదా <nn>EB హెగ్జాబైట్ల సంఖ్య\n"
+#~ " <nn>sects 512 బైట్ సెక్టార్ల సంఖ్య\n"
+
+#~ msgid "%s: virt-inspector command too long for fixed-size buffer\n"
+#~ msgstr "%s: నిర్ధిష్ట-పరిమాణపు బఫర్ కొరకు virt-inspector ఆదేశము మరీపొడవైంది\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Welcome to hivexsh, the hivex interactive shell for examining\n"
+#~ "Windows Registry binary hive files.\n"
+#~ "\n"
+#~ "Type: 'help' for help summary\n"
+#~ " 'quit' to quit the shell\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "guestfishకు స్వాగతం, libguestfs అనునది వర్చ్యువల్ మిషన్ ఫైల్సిస్టమ్సును సరికూర్చుటకు "
+#~ "ఫైల్సిస్టమ్ యింటరాక్టివ్ షెల్.\n"
+#~ "\n"
+#~ "రకము: 'help' ఆదేశముల సహాయము కొరకు\n"
+#~ " 'quit' షెల్ నిష్క్రమించుటకు\n"
+#~ "\n"