+#: tools/virt-edit.pl:169
+msgid "virt-edit: no image, VM names or filenames to edit given"
+msgstr ""
+"virt-edit: nie podano obrazu, nazw maszyn wirtualnych lub nazw plików dla "
+"polecenia edit"
+
+#: tools/virt-edit.pl:185 tools/virt-tar.pl:238 tools/virt-win-reg.pl:292
+#, fuzzy, perl-brace-format
+msgid ""
+"{prog}: No operating system could be detected inside this disk image.\n"
+"\n"
+"This may be because the file is not a disk image, or is not a virtual "
+"machine\n"
+"image, or because the OS type is not understood by libguestfs.\n"
+"\n"
+"If you feel this is an error, please file a bug report including as much\n"
+"information about the disk image as possible.\n"
+msgstr ""
+"Nie wykryto żadnego systemu operacyjnego wewnątrz tego obrazu dysku.\n"
+"\n"
+"Może to być spowodowane faktem, że plik nie jest obrazem dysku, nie jest "
+"maszyną wirtualną lub program virt-inspector nie rozumie tego typu systemu.\n"
+"\n"
+"Jeśli jest to błąd, proszę wypełnić zgłoszenie błędu dołączając tak dużo "
+"informacji o pliku obrazu, jak to tylko możliwe (w języku angielskim).\n"
+
+#: tools/virt-edit.pl:189 tools/virt-tar.pl:242 tools/virt-win-reg.pl:296
+#, fuzzy, perl-brace-format
+msgid "{prog}: multiboot operating systems are not supported.\n"
+msgstr ""
+"systemy operacyjne \"multiboot\" nie są obsługiwane przez narzędzie virt-ls\n"
+
+#: tools/virt-edit.pl:221
+msgid "File not changed.\n"
+msgstr "Plik nie został zmieniony.\n"
+
+#: tools/virt-list-filesystems.pl:142
+msgid "virt-list-filesystems: no image or VM name given"
+msgstr "virt-list-filesystems: nie podano obrazu lub nazwy maszyny wirtualnej"
+
+#: tools/virt-list-partitions.pl:152
+msgid "virt-list-partitions: no image or VM name given"
+msgstr "virt-list-partitions: nie podano obrazu lub nazwy maszyny wirtualnej"
+
+#: tools/virt-make-fs.pl:291
+msgid "virt-make-fs input output\n"
+msgstr "virt-make-fs wejście wyjście\n"
+
+#: tools/virt-make-fs.pl:321
+msgid "unexpected output from 'du' command"
+msgstr "nieoczekiwane wyjście polecenia \"du\""
+
+#: tools/virt-make-fs.pl:333 tools/virt-make-fs.pl:347
+#: tools/virt-make-fs.pl:453
+#, perl-brace-format
+msgid "{f}: unknown input format: {fmt}\n"
+msgstr "{f}: nieznany format wyjścia: {fmt}\n"
+
+#: tools/virt-make-fs.pl:391
+#, perl-brace-format
+msgid "virt-make-fs: cannot parse size parameter: {sz}\n"
+msgstr "virt-make-fs: nie można przetworzyć parametru rozmiaru: {sz}\n"
+
+#: tools/virt-make-fs.pl:401
+msgid ""
+"qemu-img create: failed to create disk image, see earlier error messages\n"
+msgstr ""
+"qemu-img create: utworzenie obrazu dysku nie powiodło się, proszę zobaczyć "
+"wcześniejsze komunikaty błędów\n"
+
+#: tools/virt-make-fs.pl:412
+msgid "virt-make-fs: NTFS support was disabled when libguestfs was compiled\n"
+msgstr ""
+"virt-make-fs: obsługa systemu plików NTFS została wyłączona podczas "
+"komplikacji biblioteki libguestfs\n"
+
+#: tools/virt-make-fs.pl:437
+msgid "tar: failed, see earlier messages\n"
+msgstr ""
+"tar: nie powiodło się, proszę zobaczyć wcześniejsze komunikaty błędów\n"
+
+#: tools/virt-make-fs.pl:459
+msgid "uncompress command failed, see earlier messages\n"
+msgstr ""
+"polecenie uncompress nie powiodło się, proszę zobaczyć wcześniejsze "
+"komunikaty błędów\n"
+
+#: tools/virt-make-fs.pl:494
+msgid ""
+"virt-make-fs: error copying contents into filesystem\n"
+"An error here usually means that the program did not estimate the\n"
+"filesystem size correctly. Please read the BUGS section of the manpage.\n"
+msgstr ""
+"virt-make-fs: błąd podczas kopiowania zawartości do systemu plików\n"
+"Błąd w tym miejscu zwykle oznacza, że program nie oszacował poprawnie\n"
+"rozmiar systemu plików. Proszę przeczytać sekcję BUGS strony podręcznika.\n"
+
+#: tools/virt-resize.pl:33
+msgid "virt-resize: sorry this program does not work on a 32 bit host\n"
+msgstr "virt-rescue: ten program nie działa na 32 bitowym gospodarzu\n"
+
+#: tools/virt-resize.pl:581
+#, perl-brace-format
+msgid "virt-resize: {file}: does not exist or is not readable\n"
+msgstr "virt-resize: {file}: nie istnieje lub nie jest odczytywalny\n"
+
+#: tools/virt-resize.pl:583
+#, perl-brace-format
+msgid ""
+"virt-resize: {file}: does not exist or is not writable\n"
+"You have to create the destination disk before running this program.\n"
+"Please read the virt-resize(1) manpage for more information.\n"
+msgstr ""
+"virt-resize: {file}: nie istnieje lub nie jest zapisywalny\n"
+"Należy utworzyć dysk docelowy przed uruchomieniem tego programu.\n"
+"Proszę przeczytać stronę podręcznika virt-resize(1), aby dowiedzieć się "
+"więcej.\n"
+
+#: tools/virt-resize.pl:662 tools/virt-resize.pl:665
+#, perl-brace-format
+msgid ""
+"virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n"
+msgstr ""
+"virt-resize: {file}: plik jest za mały, aby był obrazem dysku ({sz} bajtów)\n"
+
+#: tools/virt-resize.pl:681 tools/virt-resize.pl:693
+msgid "virt-resize: short read"
+msgstr "virt-resize: krótki odczyt"
+
+#: tools/virt-resize.pl:827
+#, perl-brace-format
+msgid "virt-resize: no logical volume called {n}\n"
+msgstr "virt-resize: brak woluminu logicznego o nazwie {n}\n"
+
+#: tools/virt-resize.pl:847
+#, perl-brace-format
+msgid ""
+"{p}: partition not found in the source disk image, when using the '{opt}' "
+"command line option\n"
+msgstr ""
+"{p}: nie odnaleziono partycji w źródłowym obrazie dysku podczas używania "
+"opcji wiersza poleceń\"{opt}\"\n"
+
+#: tools/virt-resize.pl:853
+#, perl-brace-format
+msgid ""
+"{p}: partition ignored, you cannot use it in another command line argument\n"
+msgstr ""
+"{p}: zignorowano partycję, nie można jej używać w kolejnych parametrach "
+"wiersza poleceń\n"
+
+#: tools/virt-resize.pl:857
+#, perl-brace-format
+msgid ""
+"{p}: partition deleted, you cannot use it in another command line argument\n"
+msgstr ""
+"{p}: usunięto partycję, nie można jej używać w kolejnych parametrach wiersza "
+"poleceń\n"
+
+#: tools/virt-resize.pl:899
+#, perl-brace-format
+msgid "{p}: this partition has already been marked for resizing\n"
+msgstr "{p}: ta partycja została już oznaczona do zmiany rozmiaru\n"
+
+#: tools/virt-resize.pl:907
+#, perl-brace-format
+msgid "{p}: missing size field in {o} option\n"
+msgstr "{p}: brak pola rozmiaru w opcji {o}\n"
+
+#: tools/virt-resize.pl:924
+#, perl-brace-format
+msgid "{p}: {f}: cannot parse size field\n"
+msgstr "{p}: {f}: nie można przetworzyć pola rozmiaru\n"
+
+#: tools/virt-resize.pl:929
+#, perl-brace-format
+msgid "{p}: new size is zero or negative\n"
+msgstr "{p}: nowy rozmiar wynosi zero lub jest ujemny\n"
+
+#: tools/virt-resize.pl:952
+#, perl-brace-format
+msgid ""
+"{p}: cannot make this partition smaller because it contains a\n"
+"filesystem, physical volume or other content that is larger than the new "
+"size.\n"
+"You have to resize the content first, see virt-resize(1).\n"
+msgstr ""
+"{p}: nie można zmniejszyć tej partycji, ponieważ zawiera ona system plików,\n"
+"wolumin fizyczny lub inną zawartość, która jest większa niż nowy rozmiar.\n"
+"Należy najpierw zmienić rozmiar zawartości, w tym celu proszę zobaczyć "
+"stronę podręcznika virt-resize(1).\n"
+
+#: tools/virt-resize.pl:968
+msgid "virt-resize: you cannot use options --expand and --shrink together\n"
+msgstr ""
+"virt-resize: nie można używać razem opcji --expand i --shrink together\n"
+
+#: tools/virt-resize.pl:1017
+#, perl-brace-format
+msgid ""
+"virt-resize: error: cannot use --expand when there is no surplus space to\n"
+"expand into. You need to make the target disk larger by at least {h}.\n"
+msgstr ""
+"virt-resize: błąd: nie można użyć opcji --expand, kiedy nie ma miejsca na\n"
+"rozszerzenie. Należy zwiększyć dysk docelowy o co najmniej {h}.\n"
+
+#: tools/virt-resize.pl:1032
+msgid ""
+"virt-resize: error: cannot use --shrink because there is no deficit\n"
+"(see 'deficit' in the virt-resize(1) man page)\n"
+msgstr ""
+"virt-resize: błąd: nie można użyć opcji --shrink, ponieważ brak deficytu\n"
+"(proszę zobaczyć \"deficit\" na stronie podręcznika virt-resize(1)).\n"
+
+#: tools/virt-resize.pl:1047
+msgid "Summary of changes:\n"
+msgstr "Podsumowanie zmian:\n"
+
+#: tools/virt-resize.pl:1051
+#, perl-brace-format
+msgid "{p}: partition will be ignored\n"
+msgstr "{p}: partycja zostanie zignorowana\n"
+
+#: tools/virt-resize.pl:1053
+#, perl-brace-format
+msgid "{p}: partition will be deleted\n"
+msgstr "{p}: partycja zostanie usunięta\n"
+
+#: tools/virt-resize.pl:1055
+#, perl-brace-format
+msgid "{p}: partition will be resized from {oldsize} to {newsize}\n"
+msgstr "{p}: rozmiar partycji zostanie zmieniony z {oldsize} do {newsize}\n"
+
+#: tools/virt-resize.pl:1060
+#, perl-brace-format
+msgid "{p}: content will be expanded using the '{meth}' method\n"
+msgstr "{p}: zawartość zostanie rozszerzona używając metody \"{meth}\"\n"
+
+#: tools/virt-resize.pl:1065
+#, perl-brace-format
+msgid "{p}: partition will be left alone\n"
+msgstr "{p}: partycja zostanie pozostawiona bez zmian\n"
+
+#: tools/virt-resize.pl:1070
+#, perl-brace-format
+msgid "{n}: LV will be expanded to maximum size\n"
+msgstr "{n}: wolumin logiczny zostanie rozszerzony do maksymalnego rozmiaru\n"
+
+#: tools/virt-resize.pl:1076
+#, perl-brace-format
+msgid "{n}: content will be expanded using the '{meth}' method\n"
+msgstr "{n}: zawartość zostanie rozszerzona używając metody \"{meth}\"\n"
+
+#: tools/virt-resize.pl:1083
+#, perl-brace-format
+msgid "There is a surplus of {spl} bytes ({h}).\n"
+msgstr "Istnieje nadmiar {spl} bajtów ({h}).\n"
+
+#: tools/virt-resize.pl:1088
+msgid "An extra partition will be created for the surplus.\n"
+msgstr "Dodatkowa partycja zostanie utworzona dla nadmiarowego miejsca.\n"
+
+#: tools/virt-resize.pl:1090
+msgid ""
+"The surplus space is not large enough for an extra partition to be created\n"
+"and so it will just be ignored.\n"
+msgstr ""
+"Nadmiarowe miejsce nie jest dostatecznie duże do utworzenia dodatkowej\n"
+"partycji, więc zostanie zignorowane.\n"
+
+#: tools/virt-resize.pl:1093
+msgid ""
+"The surplus space will be ignored. Run a partitioning program in the guest\n"
+"to partition this extra space if you want.\n"
+msgstr ""
+"Nadmiarowe miejsce zostanie zignorowane. Można uruchomić program\n"
+"partycjonowania w gościu, aby partycjonować te dodatkowe miejsce w razie\n"
+"potrzeby.\n"
+
+#: tools/virt-resize.pl:1096
+#, perl-brace-format
+msgid ""
+"virt-resize: error: there is a deficit of {def} bytes ({h}).\n"
+"You need to make the target disk larger by at least this amount,\n"
+"or adjust your resizing requests.\n"
+msgstr ""
+"virt-resize: błąd: istnieje deficyt {def} bajtów ({h}).\n"
+"Należy zwiększyć dysk docelowy co najmniej o tę ilość lub dostosować\n"
+"żądania zmiany rozmiaru.\n"
+
+#: tools/virt-resize.pl:1113
+msgid "virt-resize: source disk does not have a first partition\n"
+msgstr "virt-resize: dysk źródłowy nie posiada pierwszej partycji\n"
+
+#: tools/virt-resize.pl:1208
+#, perl-brace-format
+msgid "Copying {p} ...\n"
+msgstr "Kopiowanie {p}...\n"
+
+#: tools/virt-resize.pl:1271 tools/virt-resize.pl:1329
+#, perl-brace-format
+msgid "Expanding {p} using the '{meth}' method\n"
+msgstr "Rozszerzanie {p} używając metody \"{meth}\"\n"
+
+#: tools/virt-tar.pl:178 tools/virt-tar.pl:185
+msgid "virt-tar: extract/upload mode specified twice on the command line\n"
+msgstr "virt-tar: wydobywa/wysyła tryb podany dwukrotnie w wierszu poleceń\n"
+
+#: tools/virt-tar.pl:207
+msgid "virt-tar: no image, VM names, directory or filename given"
+msgstr ""
+"virt-tar: nie podano obrazu, nazw maszyn wirtualnych, katalogu lub nazwy "
+"pliku"
+
+#: tools/virt-tar.pl:210
+msgid "virt-tar: either -x or -u must be specified on the command line\n"
+msgstr "virt-tar: należy podać opcję -x lub -u w wierszu poleceń\n"
+
+#: tools/virt-tar.pl:221
+#, perl-brace-format
+msgid "virt-tar: {tarball}: file not found\n"
+msgstr "virt-tar: {tarball}: nie odnaleziono pliku\n"
+
+#: tools/virt-tar.pl:224
+#, perl-brace-format
+msgid "virt-tar: {dir}: directory name must start with '/' character\n"
+msgstr "virt-tar: {dir}: nazwa katalogu musi zaczynać się od znaku \"/\"\n"
+
+#: tools/virt-win-reg.pl:276
+msgid "no libvirt domain name or disk image given\n"
+msgstr "nie podano nazwy domeny libvirt lub obrazu dysku\n"
+
+#: tools/virt-win-reg.pl:315
+msgid ""
+"expecting 1 or 2 more parameters, subkey path and optionally the value to "
+"export\n"
+msgstr ""
+"oczekiwano jednego lub dwóch parametrów, ścieżki do podklucza i opcjonalnie "
+"wartości do wyeksportowania\n"
+
+#: tools/virt-win-reg.pl:426
+#, perl-brace-format
+msgid "virt-win-reg: {p}: not a supported Windows Registry path\n"
+msgstr ""
+"virt-win-reg: {p}: nie jest obsługiwaną ścieżką rejestru systemu Windows\n"
+
+#: tools/virt-win-reg.pl:443 tools/virt-win-reg.pl:465
+#, perl-brace-format
+msgid "virt-win-reg: {p}: file not found in guest: {err}\n"
+msgstr "virt-win-reg: {p}: nie odnaleziono pliku w gościu: {err}\n"
+
+#: tools/virt-win-reg.pl:450
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not download registry file: {err}\n"
+msgstr "virt-win-reg: {p}: nie można pobrać pliku rejestru: {err}\n"
+
+#: tools/virt-win-reg.pl:472
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not upload registry file: {err}\n"
+msgstr "virt-win-reg: {p}: nie można wysłać pliku rejestru: {err}\n"
+
+#~ msgid "virt-rescue: no image or VM names rescue given"
+#~ msgstr ""
+#~ "virt-rescue: nie podano obrazu lub nazw maszyn wirtualnych dla polecenia "
+#~ "rescue"
+
+#~ msgid "virt-df: cannot use -h and --csv options together\n"
+#~ msgstr "virt-df: nie można używać opcji -h oraz --csv jednocześnie\n"
+
+#~ msgid "{name} is not the name of a libvirt domain\n"
+#~ msgstr "{name} nie jest nazwą domeny biblioteki libvirt\n"
+
+#~ msgid "virt-ls: cannot combine -l and -R options\n"
+#~ msgstr "virt-ls: nie można łączyć opcji -l i -R\n"
+
+#~ msgid "virt-ls: no image, VM names or directory to list given"
+#~ msgstr ""
+#~ "virt-ls: nie podano obrazu, nazw maszyn wirtualnych lub katalogu do "
+#~ "wyświetlenia"
+
+#~ msgid "virt-inspector: no image or VM names given"
+#~ msgstr "virt-inspector: nie podano nazw obrazu lub maszyny wirtualnej"
+
+#~ msgid "virt-cat: no image, VM names or filenames to cat given"
+#~ msgstr ""
+#~ "virt-cat: nie podano obrazu, nazw maszyn wirtualnych lub nazw plików dla "
+#~ "polecenia cat"
+
+#~ msgid "--fish output is only possible with a single OS\n"
+#~ msgstr ""
+#~ "wyjście --fish jest możliwe tylko z pojedynczym systemem operacyjnym\n"
+
+#~ msgid ""
+#~ "virt-inspector: no YAML support, try installing perl-YAML or libyaml-"
+#~ "perl\n"
+#~ msgstr ""
+#~ "virt-inspector: brak obsługi YAML, proszę spróbować zainstalować "
+#~ "bibliotekę perl-YAML lub libyaml-perl\n"
+
+#~ msgid " Mountpoints:\n"
+#~ msgstr " Punkty montowania:\n"
+
+#~ msgid " Filesystems:\n"
+#~ msgstr " Systemy plików:\n"
+
+#~ msgid " Modprobe aliases:\n"
+#~ msgstr " Aliasy modprobe:\n"
+
+#~ msgid " Initrd modules:\n"
+#~ msgstr " Moduły initrd:\n"
+
+#~ msgid " Applications:\n"
+#~ msgstr " Aplikacje:\n"
+
+#~ msgid " Kernels:\n"
+#~ msgstr " Jądra:\n"
+
+#~ msgid " Windows Registry entries:\n"
+#~ msgstr " Wpisy rejestru systemu Windows:\n"
+
+#~ msgid "multiboot operating systems are not supported by virt-cat"
+#~ msgstr ""
+#~ "systemy operacyjne \"multiboot\" nie są obsługiwane przez narzędzie virt-"
+#~ "cat"
+
+#~ msgid "multiboot operating systems are not supported by virt-edit"
+#~ msgstr ""
+#~ "systemy operacyjne \"multiboot\" nie są obsługiwane przez narzędzie virt-"
+#~ "edit"
+
+#~ msgid "multiboot operating systems are not supported by virt-tar\n"
+#~ msgstr ""
+#~ "systemy operacyjne \"multiboot\" nie są obsługiwane przez program virt-"
+#~ "tar\n"