+#: tools/virt-edit.pl:169
+msgid "virt-edit: no image, VM names or filenames to edit given"
+msgstr ""
+
+#: tools/virt-edit.pl:185 tools/virt-tar.pl:238 tools/virt-win-reg.pl:292
+#, perl-brace-format
+msgid ""
+"{prog}: No operating system could be detected inside this disk image.\n"
+"\n"
+"This may be because the file is not a disk image, or is not a virtual "
+"machine\n"
+"image, or because the OS type is not understood by libguestfs.\n"
+"\n"
+"If you feel this is an error, please file a bug report including as much\n"
+"information about the disk image as possible.\n"
+msgstr ""
+
+#: tools/virt-edit.pl:189 tools/virt-tar.pl:242 tools/virt-win-reg.pl:296
+#, perl-brace-format
+msgid "{prog}: multiboot operating systems are not supported.\n"
+msgstr ""
+
+#: tools/virt-edit.pl:221
+msgid "File not changed.\n"
+msgstr ""
+
+#: tools/virt-list-filesystems.pl:142
+msgid "virt-list-filesystems: no image or VM name given"
+msgstr ""
+
+#: tools/virt-list-partitions.pl:152
+msgid "virt-list-partitions: no image or VM name given"
+msgstr ""
+
+#: tools/virt-make-fs.pl:291
+msgid "virt-make-fs input output\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:321
+msgid "unexpected output from 'du' command"
+msgstr ""
+
+#: tools/virt-make-fs.pl:333 tools/virt-make-fs.pl:347
+#: tools/virt-make-fs.pl:453
+#, perl-brace-format
+msgid "{f}: unknown input format: {fmt}\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:391
+#, perl-brace-format
+msgid "virt-make-fs: cannot parse size parameter: {sz}\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:401
+#, fuzzy
+msgid ""
+"qemu-img create: failed to create disk image, see earlier error messages\n"
+msgstr "guestfs_launch ವಿಫಲಗೊಂಡಿದೆ, ಹಿಂದಿನ ದೋಷ ಸಂದೇಶಗಳನ್ನು ನೋಡಿ"
+
+#: tools/virt-make-fs.pl:412
+msgid "virt-make-fs: NTFS support was disabled when libguestfs was compiled\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:437
+#, fuzzy
+msgid "tar: failed, see earlier messages\n"
+msgstr "guestfs_launch ವಿಫಲಗೊಂಡಿದೆ, ಹಿಂದಿನ ದೋಷ ಸಂದೇಶಗಳನ್ನು ನೋಡಿ"
+
+#: tools/virt-make-fs.pl:459
+#, fuzzy
+msgid "uncompress command failed, see earlier messages\n"
+msgstr "guestfs_launch ವಿಫಲಗೊಂಡಿದೆ, ಹಿಂದಿನ ದೋಷ ಸಂದೇಶಗಳನ್ನು ನೋಡಿ"
+
+#: tools/virt-make-fs.pl:494
+msgid ""
+"virt-make-fs: error copying contents into filesystem\n"
+"An error here usually means that the program did not estimate the\n"
+"filesystem size correctly. Please read the BUGS section of the manpage.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:33
+msgid "virt-resize: sorry this program does not work on a 32 bit host\n"
+msgstr ""
+
+#: tools/virt-resize.pl:581
+#, fuzzy, perl-brace-format
+msgid "virt-resize: {file}: does not exist or is not readable\n"
+msgstr "ಬೈನರಿ '%s' ಅಸ್ತಿತ್ವದಲ್ಲಿಲ್ಲ ಅಥವ ಅದನ್ನು ಕಾರ್ಯಗತಗೊಳಿಸಲು ಸಾಧ್ಯವಿಲ್ಲ\n"
+
+#: tools/virt-resize.pl:583
+#, perl-brace-format
+msgid ""
+"virt-resize: {file}: does not exist or is not writable\n"
+"You have to create the destination disk before running this program.\n"
+"Please read the virt-resize(1) manpage for more information.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:662 tools/virt-resize.pl:665
+#, perl-brace-format
+msgid ""
+"virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n"
+msgstr ""
+
+#: tools/virt-resize.pl:681 tools/virt-resize.pl:693
+msgid "virt-resize: short read"
+msgstr ""
+
+#: tools/virt-resize.pl:827
+#, fuzzy, perl-brace-format
+msgid "virt-resize: no logical volume called {n}\n"
+msgstr "ಒಂದು LVM ತಾರ್ಕಿಕ ಪರಿಮಾಣದ ಗಾತ್ರವನ್ನು ಬದಲಾಯಿಸು"
+
+#: tools/virt-resize.pl:847
+#, perl-brace-format
+msgid ""
+"{p}: partition not found in the source disk image, when using the '{opt}' "
+"command line option\n"
+msgstr ""
+
+#: tools/virt-resize.pl:853
+#, perl-brace-format
+msgid ""
+"{p}: partition ignored, you cannot use it in another command line argument\n"
+msgstr ""
+
+#: tools/virt-resize.pl:857
+#, perl-brace-format
+msgid ""
+"{p}: partition deleted, you cannot use it in another command line argument\n"
+msgstr ""
+
+#: tools/virt-resize.pl:899
+#, perl-brace-format
+msgid "{p}: this partition has already been marked for resizing\n"
+msgstr ""
+
+#: tools/virt-resize.pl:907
+#, perl-brace-format
+msgid "{p}: missing size field in {o} option\n"
+msgstr ""
+
+#: tools/virt-resize.pl:924
+#, perl-brace-format
+msgid "{p}: {f}: cannot parse size field\n"
+msgstr ""
+
+#: tools/virt-resize.pl:929
+#, perl-brace-format
+msgid "{p}: new size is zero or negative\n"
+msgstr ""
+
+#: tools/virt-resize.pl:952
+#, perl-brace-format
+msgid ""
+"{p}: cannot make this partition smaller because it contains a\n"
+"filesystem, physical volume or other content that is larger than the new "
+"size.\n"
+"You have to resize the content first, see virt-resize(1).\n"
+msgstr ""
+
+#: tools/virt-resize.pl:968
+msgid "virt-resize: you cannot use options --expand and --shrink together\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1017
+#, perl-brace-format
+msgid ""
+"virt-resize: error: cannot use --expand when there is no surplus space to\n"
+"expand into. You need to make the target disk larger by at least {h}.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1032
+msgid ""
+"virt-resize: error: cannot use --shrink because there is no deficit\n"
+"(see 'deficit' in the virt-resize(1) man page)\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1047
+msgid "Summary of changes:\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1051
+#, perl-brace-format
+msgid "{p}: partition will be ignored\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1053
+#, perl-brace-format
+msgid "{p}: partition will be deleted\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1055
+#, perl-brace-format
+msgid "{p}: partition will be resized from {oldsize} to {newsize}\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1060
+#, perl-brace-format
+msgid "{p}: content will be expanded using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1065
+#, perl-brace-format
+msgid "{p}: partition will be left alone\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1070
+#, perl-brace-format
+msgid "{n}: LV will be expanded to maximum size\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1076
+#, perl-brace-format
+msgid "{n}: content will be expanded using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1083
+#, perl-brace-format
+msgid "There is a surplus of {spl} bytes ({h}).\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1088
+msgid "An extra partition will be created for the surplus.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1090
+msgid ""
+"The surplus space is not large enough for an extra partition to be created\n"
+"and so it will just be ignored.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1093
+msgid ""
+"The surplus space will be ignored. Run a partitioning program in the guest\n"
+"to partition this extra space if you want.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1096
+#, perl-brace-format
+msgid ""
+"virt-resize: error: there is a deficit of {def} bytes ({h}).\n"
+"You need to make the target disk larger by at least this amount,\n"
+"or adjust your resizing requests.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1113
+msgid "virt-resize: source disk does not have a first partition\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1208
+#, perl-brace-format
+msgid "Copying {p} ...\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1271 tools/virt-resize.pl:1329
+#, perl-brace-format
+msgid "Expanding {p} using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-tar.pl:178 tools/virt-tar.pl:185
+msgid "virt-tar: extract/upload mode specified twice on the command line\n"
+msgstr ""
+
+#: tools/virt-tar.pl:207
+msgid "virt-tar: no image, VM names, directory or filename given"
+msgstr ""
+
+#: tools/virt-tar.pl:210
+msgid "virt-tar: either -x or -u must be specified on the command line\n"
+msgstr ""
+
+#: tools/virt-tar.pl:221
+#, perl-brace-format
+msgid "virt-tar: {tarball}: file not found\n"
+msgstr ""
+
+#: tools/virt-tar.pl:224
+#, perl-brace-format
+msgid "virt-tar: {dir}: directory name must start with '/' character\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:276
+msgid "no libvirt domain name or disk image given\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:315
+msgid ""
+"expecting 1 or 2 more parameters, subkey path and optionally the value to "
+"export\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:426
+#, perl-brace-format
+msgid "virt-win-reg: {p}: not a supported Windows Registry path\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:443 tools/virt-win-reg.pl:465
+#, perl-brace-format
+msgid "virt-win-reg: {p}: file not found in guest: {err}\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:450
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not download registry file: {err}\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:472
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not upload registry file: {err}\n"
+msgstr ""
+
+#, fuzzy
+#~ msgid "virt-df: cannot use -h and --csv options together\n"
+#~ msgstr "%s: --listen ಹಾಗು --file ಆಯ್ಕೆಗಳನ್ನು ಒಟ್ಟಿಗೆ ಬಳಸುವಂತಿಲ್ಲ\n"
+
+#, fuzzy
+#~ msgid " Mountpoints:\n"
+#~ msgstr "ಆರೋಹಣಾತಾಣವನ್ನು ತೋರಿಸು"
+
+#, fuzzy
+#~ msgid " Filesystems:\n"
+#~ msgstr "ಕಡತವ್ಯವಸ್ಥೆಯನ್ನು ರಚಿಸು"
+
+#~ msgid "allocate an image"
+#~ msgstr "ಒಂದು ಚಿತ್ರವನ್ನು ನಿಯೋಜಿಸು"
+
+#~ msgid "edit a file in the image"
+#~ msgstr "ಚಿತ್ರದಲ್ಲಿನ ಒಂದು ಕಡತವನ್ನು ಸಂಪಾದಿಸಿ"
+
+#~ msgid "view a file in the pager"
+#~ msgstr "ಒಂದು ಕಡತವನ್ನು ಪೇಜರಿನಲ್ಲಿ ನೋಡು"
+
+#~ msgid ""
+#~ "echo - display a line of text\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " This echos the parameters to the terminal.\n"
+#~ msgstr ""
+#~ "echo - ಒಂದು ಪಠ್ಯದ ಸಾಲನ್ನು ತೋರಿಸುತ್ತದೆ\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " ಇದು ನಿಯತಾಂಕಗಳನ್ನು ಟರ್ಮಿನಲ್ಗೆ ಪ್ರತಿಧ್ವನಿಸುತ್ತದೆ(ಎಕೊ).\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "edit - edit a file in the image\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " This is used to edit a file.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\", editing locally, and then \"write\".\n"
+#~ "\n"
+#~ " Normally it uses $EDITOR, but if you use the aliases\n"
+#~ " \"vi\" or \"emacs\" you will get those editors.\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "edit - ಚಿತ್ರಿಕೆಯಲ್ಲಿನ ಕಡತವನ್ನು ಸಂಪಾದಿಸುತ್ತದೆ\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " ಕಡತವನ್ನು ಸಂಪಾದಿಸಲು ಇದನ್ನು ಬಳಸಲಾಗುತ್ತದೆ.\n"
+#~ "\n"
+#~ " ಇದು \"cat\" ಅನ್ನು ಚಲಾಯಿಸಿ, ಸ್ಥಳೀಯವಾಗಿ ಬದಲಾಯಿಸಿ, ನಂತರ \"write-file\" "
+#~ "ಅನ್ನು \n"
+#~ " ಚಲಾಯಿಸುವುದಕ್ಕೆ ಸಮನಾಗಿರುತ್ತದೆ (ಹಾಗು ಇದರಿಂದ ಅನ್ವಯಿಸಲಾಗುತ್ತದೆ).\n"
+#~ "\n"
+#~ " ಸಾಮಾನ್ಯವಾಗಿ ಇದು $EDITOR ಅನ್ನು ಬಳಸುತ್ತದೆ ಆದರೆ, ಆದರೆ ನೀವು \"vi\"\n"
+#~ " ಅಥವ \"emacs\" ಆಲಿಯಾಸ್ಗಳನ್ನು ಬಳಸಿದಲ್ಲಿ ಈ ಸಂಪಾದಕಗಳು ದೊರೆಯುತ್ತವೆ.\n"
+#~ "\n"
+#~ " ಸೂಚನೆ: ಇದು ದೊಡ್ಡದಾದ ಕಡತಗಳಲ್ಲಿ (> 2 MB) ಅಥವ \\0 ಬೈಟ್ಗಳನ್ನು\n"
+#~ " ಹೊಂದಿರುವ ಬೈನರಿ ಕಡತಗಳಲ್ಲಿ ಸಮರ್ಪಕವಾಗಿ ಕೆಲಸ ಮಾಡುವುದಿಲ್ಲ.\n"
+
+#~ msgid ""
+#~ "lcd - local change directory\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " Change guestfish's current directory. This command is\n"
+#~ " useful if you want to download files to a particular\n"
+#~ " place.\n"
+#~ msgstr ""
+#~ "lcd - ಕೋಶವನ್ನು ಸ್ಥಳೀಯವಾಗಿ ಬದಲಾಯಿಸುವಿಕೆ\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " guestfish ನ ಪ್ರಸಕ್ತ ಕೋಶವನ್ನು ಬದಲಾಯಿಸಿ. ಕಡತಗಳನ್ನು ನಿಶ್ಚಿತ ಸ್ಥಳಕ್ಕೆ \n"
+#~ " ಡೌನ್ಲೋಡ್ ಮಾಡಲು ನೀವು ಬಯಸಿದಲ್ಲಿ ಇದು\n"
+#~ " ಸಹಾಯಕವಾಗುತ್ತದೆ.\n"
+
+#~ msgid ""
+#~ "glob - expand wildcards in command\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob runs <command> with wildcards expanded in any\n"
+#~ " command args. Note that the command is run repeatedly\n"
+#~ " once for each expanded argument.\n"
+#~ msgstr ""
+#~ "glob - ಆಜ್ಞೆಯಲ್ಲಿ ವೈಲ್ಡ್ಕಾರ್ಡನ್ನು ಹಿಗ್ಗಿಸು\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob ಯಾವುದೆ ಆಜ್ಞೆಯ ಆರ್ಗ್ಯುಮೆಂಟ್ಗಳಲ್ಲಿ ಹಿಗ್ಗಿಸಲಾದ ವೈಲ್ಡ್ಕಾರ್ಡುಗಳೊಂದಿಗೆ \n"
+#~ " <command> ಅನ್ನು ಚಲಾಯಿಸುತ್ತದೆ. ಹಿಗ್ಗಿಸಲಾದ ಪ್ರತಿಯೊಂದು ಆರ್ಗ್ಯುಮೆಂಟ್ಗಳೊಂದಿಗೆ\n"
+#~ " ಆಜ್ಞೆಯನ್ನು ಮತ್ತೆ ಮತ್ತೆ ಚಲಾಯಿಸಲಾಗುತ್ತದೆ ಎಂಬುದನ್ನು ನೆನಪಿಡಿ.\n"
+
+#~ msgid ""
+#~ "more - view a file in the pager\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " This is used to view a file in the pager.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\" and using the pager.\n"
+#~ "\n"
+#~ " Normally it uses $PAGER, but if you use the alias\n"
+#~ " \"less\" then it always uses \"less\".\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "more - ಕಡತವನ್ನು ಪೇಜರಿನಲ್ಲಿ ವೀಕ್ಷಿಸಿ\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " ಕಡತವನ್ನು ಪೇಜರಿನಲ್ಲಿ ವೀಕ್ಷಿಸಲು ಇದನ್ನು ಬಳಸಲಾಗುತ್ತದೆ.\n"
+#~ "\n"
+#~ " ಇದು \"cat\" ಅನ್ನು ಚಲಾಯಿಸಿ, ನಂತರ ಪೇಜರನ್ನು ಬಳಸುವುದಕ್ಕೆ \n"
+#~ " ಸಮನಾಗಿರುತ್ತದೆ (ಹಾಗು ಇದರಿಂದ ಅನ್ವಯಿಸಲಾಗುತ್ತದೆ).\n"
+#~ "\n"
+#~ " ಸಾಮಾನ್ಯವಾಗಿ ಇದು $PAGER ಅನ್ನು ಬಳಸುತ್ತದೆ ಆದರೆ, ಆದರೆ ನೀವು\n"
+#~ " \"less\" ಆಲಿಯಾಸ್ಗಳನ್ನು ಬಳಸಿದಲ್ಲಿ ಯಾವಗಲೂ \"less\" ಅನ್ನೇ ಬಳಸುತ್ತದೆ.\n"
+#~ "\n"
+#~ " ಸೂಚನೆ: ಇದು ದೊಡ್ಡದಾದ ಕಡತಗಳಲ್ಲಿ (> 2 MB) ಅಥವ \\0 ಬೈಟ್ಗಳನ್ನು\n"
+#~ " ಹೊಂದಿರುವ ಬೈನರಿ ಕಡತಗಳಲ್ಲಿ ಸಮರ್ಪಕವಾಗಿ ಕೆಲಸ ಮಾಡುವುದಿಲ್ಲ.\n"
+
+#~ msgid ""
+#~ "reopen - close and reopen the libguestfs handle\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
+#~ "this normally, because the handle is closed properly when guestfish\n"
+#~ "exits. However this is occasionally useful for testing.\n"
+#~ msgstr ""
+#~ "reopen - libguestfs ಹ್ಯಾಂಡಲ್ ಅನ್ನು ಮುಚ್ಚು ಅಥವ ಮರಳಿ ತೆರೆಯಿರಿ\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "libguestfs ಹ್ಯಾಂಡಲ್ ಅನ್ನು ಮುಚ್ಚು ಅಥವ ಮರಳಿ ತೆರೆಯಿರಿ. ಇದನ್ನು ಸಾಮಾನ್ಯವಾಗಿ ಬಳಸುವ\n"
+#~ "ಅಗತ್ಯವಿರುವುದಿಲ್ಲ, ಏಕೆಂದರೆ guestfish ನಿರ್ಗಮಿಸಿದಾಗ ಹ್ಯಾಂಡಲ್ ಸರಿಯಾಗಿ "
+#~ "ಮುಚ್ಚಲ್ಪಡುತ್ತದೆ.\n"
+#~ "ಆದರೆ ಇದು ಪರೀಕ್ಷಿಸುವ ಕಾರ್ಯದಲ್ಲಿ ಒಮ್ಮೊಮ್ಮೆ ಉಪಯೋಗಕ್ಕೆ ಬರುತ್ತದೆ.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "sparse - allocate a sparse image file\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty sparse file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " In all respects it works the same as the 'alloc'\n"
+#~ " command, except that the image file is allocated\n"
+#~ " sparsely, which means that disk blocks are not assigned\n"
+#~ " to the file until they are needed. Sparse disk files\n"
+#~ " only use space when written to, but they are slower\n"
+#~ " and there is a danger you could run out of real disk\n"
+#~ " space during a write operation.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
+#~ msgstr ""
+#~ "sparse - ಚದುರಿದ ಚಿತ್ರಿಕಾ ಕಡತವನ್ನು ನಿಯೋಜಿಸು\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " ಇದು ನಿಗದಿತ ಗಾತ್ರದ ಒಂದು ಖಾಲಿ ಚದುರಿದ ಕಡತವನ್ನು ರಚಿಸುತ್ತದೆ,\n"
+#~ " ಹಾಗು ನಂತರ ಪರಿಶೀಲನೆಗಾಗಿ ಅದನ್ನು ಸೇರಿಸಲಾಗುತ್ತದೆ.\n"
+#~ "\n"
+#~ " ಚಿತ್ರಿಕಾ ಕಡತವನ್ನು ವಿರಳವಾಗಿ ನಿಯೋಜಿಸಲಾಗುತ್ತದೆ ಎನ್ನುವುದನ್ನು ಹೊರತು ಪಡಿಸಿ\n"
+#~ " ಇದು ಎಲ್ಲಾ ರೀತಿಯಲ್ಲೂ 'alloc' ಆಜ್ಞೆಯ ರೀತಿಯಲ್ಲಿಯೆ ಕೆಲಸ ಮಾಡುತ್ತದೆ.\n"
+#~ " ಇದರರ್ಥ ಡಿಸ್ಕ್ ಖಂಡಗಳ ಅಗತ್ಯವಿರದ ಹೊರತು ಅವುಗಳನ್ನು ಕಡತಗಳಿಗೆ ನಿಯೋಜಿಸಲಾಗುವುದಿಲ್ಲ\n"
+#~ " ಎಂದರ್ಥ. ಚದುರಿದ ಡಿಸ್ಕ್ ಕಡತಗಳನ್ನು ಬರೆದಾಗ ಜಾಗವನ್ನು ಬಳಸಿಕೊಳ್ಳುತ್ತದೆ, ಆದರೆ ಈ\n"
+#~ " ಪ್ರಕ್ರಿಯೆಯು ನಿಧಾನಗತಿಯಲ್ಲಿರುತ್ತದೆ ಹಾಗು ಬರೆಯುವ ಸಮಯದಲ್ಲಿ ನಿಮ್ಮ ಡಿಸ್ಕ್ ಜಾಗವು\n"
+#~ " ತೀರಿನ ಹೋಗುವ ಅಪಾಯವಿರುತ್ತದೆ\n"
+#~ "\n"
+#~ " ಹೆಚ್ಚಿನ ಸುಧಾರಿತ ಚಿತ್ರಿಕಾ ರಚನೆಯ ಬಗೆಗಿನ ಮಾಹಿತಿಗಾಗಿ qemu-img ಸವಲತ್ತನ್ನು "
+#~ "ನೋಡಿ.\n"
+#~ " ಗಾತ್ರವನ್ನು ಹೀಗೆ ಸೂಚಿಸಬಹುದು (where <nn> means a number):\n"
+#~ " <nn> ಕಿಲೋಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " ಉದಾ: 1440 ಶಿಷ್ಟ 3.5\" ಫ್ಲಾಪಿ\n"
+#~ " <nn>K ಅಥವ <nn>KB ಕಿಲೋಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>M ಅಥವ <nn>MB ಮೆಗಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>G ಅಥವ <nn>GB ಗಿಗಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>T ಅಥವ <nn>TB ಟೆರಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>P ಅಥವ <nn>PB ಪಿಟಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>E ಅಥವ <nn>EB ಎಕ್ಸಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>sects 512 ಬೈಟ್ ವಿಭಾಗಗಳ ಸಂಖ್ಯೆ\n"
+
+#~ msgid ""
+#~ "time - measure time taken to run command\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " This runs <command> as usual, and prints the elapsed\n"
+#~ " time afterwards.\n"
+#~ msgstr ""
+#~ "time - ಆಜ್ಞೆಯನ್ನು ಚಲಾಯಿಸಲು ತಗಲುವ ಸಮಯವನ್ನು ಲೆಕ್ಕಹಾಕಿ\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " ಇದು <command> ಅನ್ನು ಸಾಮಾನ್ಯ ಕ್ರಮದಲ್ಲಿಯೆ ಚಲಾಯಿಸುತ್ತದೆ, ಹಾಗು\n"
+#~ " ಕೊನೆಯಲ್ಲಿ ತಗುಲಿದ ಸಮಯವನ್ನು ತೋರಿಸುತ್ತದೆ.\n"
+
+#~ msgid "external command failed: %s"
+#~ msgstr "ಬಾಹ್ಯ ಆಜ್ಞೆಯು ವಿಫಲಗೊಂಡಿದೆ: %s"
+
+#~ msgid "test if file exists"
+#~ msgstr "ಕಡತವು ಅಸ್ತಿತ್ವದಲ್ಲಿದ್ದರೆ ಪರೀಕ್ಷಿಸು"
+
+#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
+#~ msgstr "%s ಅಥವ %s ವು LIBGUESTFS_PATH ನಲ್ಲಿ ಕಂಡು ಬಂದಿಲ್ಲ (ಪ್ರಸಕ್ತ ಮಾರ್ಗ = %s)"
+
+#~ msgid "failed to connect to vmchannel socket"
+#~ msgstr "vmchannel ಸಾಕೆಟ್ನೊಂದಿಗೆ ಸಂಪರ್ಕ ಸಾಧಿಸುವಲ್ಲಿ ವಿಫಲಗೊಂಡಿದೆ"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
+#~ "selinux\n"
+#~ msgstr ""
+#~ "%s: -a, -m, --listen, --remote ಅಥವ --selinux ದೊಂದಿಗೆ -i ಎಂಬ ಅಯ್ಕೆಯನ್ನು "
+#~ "ಬಳಸುವಂತಿಲ್ಲ\n"
+
+#, fuzzy
+#~ msgid "cpio command failed: {error}"
+#~ msgstr "ಆಜ್ಞೆಯು ವಿಫಲಗೊಂಡಿದೆ: %s"
+
+#~ msgid ""
+#~ "alloc - allocate an image\n"
+#~ " alloc <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty (zeroed) file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified (where <nn> means a number):\n"
+#~ " <nn> number of kilobytes\n"
+#~ " eg: 1440 standard 3.5\" floppy\n"
+#~ " <nn>K or <nn>KB number of kilobytes\n"
+#~ " <nn>M or <nn>MB number of megabytes\n"
+#~ " <nn>G or <nn>GB number of gigabytes\n"
+#~ " <nn>T or <nn>TB number of terabytes\n"
+#~ " <nn>P or <nn>PB number of petabytes\n"
+#~ " <nn>E or <nn>EB number of exabytes\n"
+#~ " <nn>sects number of 512 byte sectors\n"
+#~ msgstr ""
+#~ "alloc - ಒಂದು ಚಿತ್ರವನ್ನು ನಿಯೋಜಿಸು\n"
+#~ " alloc <filename> <size>\n"
+#~ "\n"
+#~ " ಇದು ಒಂದು ಒದಗಿಸಲಾದ ಗಾತ್ರವನ್ನು ಹೊಂದಿದ ಒಂದು ಖಾಲಿ(ಸೊನ್ನೆಗಳನ್ನು ಹೊಂದಿರುವ) "
+#~ "ಕಡತವನ್ನು ರಚಿಸುತ್ತದೆ,\n"
+#~ " ನಂತರ ಹೆಚ್ಚಿನ ಪರಿಶೀಲನೆಗಾಗಿ ಸೇರಿಸಲಾಗುತ್ತದೆ.\n"
+#~ "\n"
+#~ " ಹೆಚ್ಚಿನ ಸುಧಾರಿತ ಚಿತ್ರಿಕಾ ರಚನೆಯ ಬಗೆಗಿನ ಮಾಹಿತಿಗಾಗಿ qemu-img ಸವಲತ್ತನ್ನು "
+#~ "ನೋಡಿ.\n"
+#~ "\n"
+#~ " ಗಾತ್ರವನ್ನು ಹೀಗೆ ಸೂಚಿಸಬಹುದು (where <nn> means a number):\n"
+#~ " <nn> ಕಿಲೋಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " ಉದಾ: 1440 ಶಿಷ್ಟ 3.5\" ಫ್ಲಾಪಿ\n"
+#~ " <nn>K ಅಥವ <nn>KB ಕಿಲೋಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>M ಅಥವ <nn>MB ಮೆಗಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>G ಅಥವ <nn>GB ಗಿಗಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>T ಅಥವ <nn>TB ಟೆರಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>P ಅಥವ <nn>PB ಪಿಟಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>E ಅಥವ <nn>EB ಎಕ್ಸಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>sects 512 ಬೈಟ್ ವಿಭಾಗಗಳ ಸಂಖ್ಯೆ\n"
+
+#~ msgid "%s: virt-inspector command too long for fixed-size buffer\n"
+#~ msgstr "%s: virt-inspector ಎನ್ನುವುದು ನಿಶ್ಚಿತ ಬಫರಿಗಾಗಿ ಬಹಳ ಉದ್ದವಾಗಿದೆ\n"
+