+#: tools/virt-edit.pl:169
+msgid "virt-edit: no image, VM names or filenames to edit given"
+msgstr ""
+
+#: tools/virt-edit.pl:185 tools/virt-tar.pl:243 tools/virt-win-reg.pl:217
+#, perl-brace-format
+msgid ""
+"{prog}: No operating system could be detected inside this disk image.\n"
+"\n"
+"This may be because the file is not a disk image, or is not a virtual "
+"machine\n"
+"image, or because the OS type is not understood by libguestfs.\n"
+"\n"
+"If you feel this is an error, please file a bug report including as much\n"
+"information about the disk image as possible.\n"
+msgstr ""
+
+#: tools/virt-edit.pl:189 tools/virt-tar.pl:247 tools/virt-win-reg.pl:221
+#, perl-brace-format
+msgid "{prog}: multiboot operating systems are not supported.\n"
+msgstr ""
+
+#: tools/virt-edit.pl:221
+msgid "File not changed.\n"
+msgstr ""
+
+#: tools/virt-list-filesystems.pl:142
+msgid "virt-list-filesystems: no image or VM name given"
+msgstr ""
+
+#: tools/virt-list-partitions.pl:152
+msgid "virt-list-partitions: no image or VM name given"
+msgstr ""
+
+#: tools/virt-make-fs.pl:291
+msgid "virt-make-fs input output\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:321
+msgid "unexpected output from 'du' command"
+msgstr ""
+
+#: tools/virt-make-fs.pl:333 tools/virt-make-fs.pl:347
+#: tools/virt-make-fs.pl:458
+#, perl-brace-format
+msgid "{f}: unknown input format: {fmt}\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:391
+#, perl-brace-format
+msgid "virt-make-fs: cannot parse size parameter: {sz}\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:406
+#, fuzzy
+msgid ""
+"qemu-img create: failed to create disk image, see earlier error messages\n"
+msgstr "guestfs_launch ವಿಫಲಗೊಂಡಿದೆ, ಹಿಂದಿನ ದೋಷ ಸಂದೇಶಗಳನ್ನು ನೋಡಿ"
+
+#: tools/virt-make-fs.pl:417
+msgid "virt-make-fs: NTFS support was disabled when libguestfs was compiled\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:442
+#, fuzzy
+msgid "tar: failed, see earlier messages\n"
+msgstr "guestfs_launch ವಿಫಲಗೊಂಡಿದೆ, ಹಿಂದಿನ ದೋಷ ಸಂದೇಶಗಳನ್ನು ನೋಡಿ"
+
+#: tools/virt-make-fs.pl:464
+#, fuzzy
+msgid "uncompress command failed, see earlier messages\n"
+msgstr "guestfs_launch ವಿಫಲಗೊಂಡಿದೆ, ಹಿಂದಿನ ದೋಷ ಸಂದೇಶಗಳನ್ನು ನೋಡಿ"
+
+#: tools/virt-make-fs.pl:499
+msgid ""
+"virt-make-fs: error copying contents into filesystem\n"
+"An error here usually means that the program did not estimate the\n"
+"filesystem size correctly. Please read the BUGS section of the manpage.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:33
+msgid "virt-resize: sorry this program does not work on a 32 bit host\n"
+msgstr ""
+
+#: tools/virt-resize.pl:581
+#, fuzzy, perl-brace-format
+msgid "virt-resize: {file}: does not exist or is not readable\n"
+msgstr "ಬೈನರಿ '%s' ಅಸ್ತಿತ್ವದಲ್ಲಿಲ್ಲ ಅಥವ ಅದನ್ನು ಕಾರ್ಯಗತಗೊಳಿಸಲು ಸಾಧ್ಯವಿಲ್ಲ\n"
+
+#: tools/virt-resize.pl:583
+#, perl-brace-format
+msgid ""
+"virt-resize: {file}: does not exist or is not writable\n"
+"You have to create the destination disk before running this program.\n"
+"Please read the virt-resize(1) manpage for more information.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:663 tools/virt-resize.pl:666
+#, perl-brace-format
+msgid ""
+"virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n"
+msgstr ""
+
+#: tools/virt-resize.pl:682 tools/virt-resize.pl:694
+msgid "virt-resize: short read"
+msgstr ""
+
+#: tools/virt-resize.pl:828
+#, fuzzy, perl-brace-format
+msgid "virt-resize: no logical volume called {n}\n"
+msgstr "ಒಂದು LVM ತಾರ್ಕಿಕ ಪರಿಮಾಣದ ಗಾತ್ರವನ್ನು ಬದಲಾಯಿಸು"
+
+#: tools/virt-resize.pl:848
+#, perl-brace-format
+msgid ""
+"{p}: partition not found in the source disk image, when using the '{opt}' "
+"command line option\n"
+msgstr ""
+
+#: tools/virt-resize.pl:854
+#, perl-brace-format
+msgid ""
+"{p}: partition ignored, you cannot use it in another command line argument\n"
+msgstr ""
+
+#: tools/virt-resize.pl:858
+#, perl-brace-format
+msgid ""
+"{p}: partition deleted, you cannot use it in another command line argument\n"
+msgstr ""
+
+#: tools/virt-resize.pl:900
+#, perl-brace-format
+msgid "{p}: this partition has already been marked for resizing\n"
+msgstr ""
+
+#: tools/virt-resize.pl:908
+#, perl-brace-format
+msgid "{p}: missing size field in {o} option\n"
+msgstr ""
+
+#: tools/virt-resize.pl:925
+#, perl-brace-format
+msgid "{p}: {f}: cannot parse size field\n"
+msgstr ""
+
+#: tools/virt-resize.pl:930
+#, perl-brace-format
+msgid "{p}: new size is zero or negative\n"
+msgstr ""
+
+#: tools/virt-resize.pl:953
+#, perl-brace-format
+msgid ""
+"{p}: cannot make this partition smaller because it contains a\n"
+"filesystem, physical volume or other content that is larger than the new "
+"size.\n"
+"You have to resize the content first, see virt-resize(1).\n"
+msgstr ""
+
+#: tools/virt-resize.pl:969
+msgid "virt-resize: you cannot use options --expand and --shrink together\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1018
+#, perl-brace-format
+msgid ""
+"virt-resize: error: cannot use --expand when there is no surplus space to\n"
+"expand into. You need to make the target disk larger by at least {h}.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1033
+msgid ""
+"virt-resize: error: cannot use --shrink because there is no deficit\n"
+"(see 'deficit' in the virt-resize(1) man page)\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1048
+msgid "Summary of changes:\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1052
+#, perl-brace-format
+msgid "{p}: partition will be ignored\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1054
+#, perl-brace-format
+msgid "{p}: partition will be deleted\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1056
+#, perl-brace-format
+msgid "{p}: partition will be resized from {oldsize} to {newsize}\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1061
+#, perl-brace-format
+msgid "{p}: content will be expanded using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1066
+#, perl-brace-format
+msgid "{p}: partition will be left alone\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1071
+#, perl-brace-format
+msgid "{n}: LV will be expanded to maximum size\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1077
+#, perl-brace-format
+msgid "{n}: content will be expanded using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1084
+#, perl-brace-format
+msgid "There is a surplus of {spl} bytes ({h}).\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1089
+msgid "An extra partition will be created for the surplus.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1091
+msgid ""
+"The surplus space is not large enough for an extra partition to be created\n"
+"and so it will just be ignored.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1094
+msgid ""
+"The surplus space will be ignored. Run a partitioning program in the guest\n"
+"to partition this extra space if you want.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1097
+#, perl-brace-format
+msgid ""
+"virt-resize: error: there is a deficit of {def} bytes ({h}).\n"
+"You need to make the target disk larger by at least this amount,\n"
+"or adjust your resizing requests.\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1114
+msgid "virt-resize: source disk does not have a first partition\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1209
+#, perl-brace-format
+msgid "Copying {p} ...\n"
+msgstr ""
+
+#: tools/virt-resize.pl:1272 tools/virt-resize.pl:1330
+#, perl-brace-format
+msgid "Expanding {p} using the '{meth}' method\n"
+msgstr ""
+
+#: tools/virt-tar.pl:183 tools/virt-tar.pl:190
+msgid "virt-tar: extract/upload mode specified twice on the command line\n"
+msgstr ""
+
+#: tools/virt-tar.pl:212
+msgid "virt-tar: no image, VM names, directory or filename given"
+msgstr ""
+
+#: tools/virt-tar.pl:215
+msgid "virt-tar: either -x or -u must be specified on the command line\n"
+msgstr ""
+
+#: tools/virt-tar.pl:226
+#, perl-brace-format
+msgid "virt-tar: {tarball}: file not found\n"
+msgstr ""
+
+#: tools/virt-tar.pl:229
+#, perl-brace-format
+msgid "virt-tar: {dir}: directory name must start with '/' character\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:201
+msgid "no libvirt domain name or disk image given\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:240
+msgid ""
+"expecting 1 or 2 more parameters, subkey path and optionally the value to "
+"export\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:351
+#, perl-brace-format
+msgid "virt-win-reg: {p}: not a supported Windows Registry path\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:368 tools/virt-win-reg.pl:390
+#, perl-brace-format
+msgid "virt-win-reg: {p}: file not found in guest: {err}\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:375
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not download registry file: {err}\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:397
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not upload registry file: {err}\n"
+msgstr ""
+
+#, fuzzy
+#~ msgid "failed to create temporary cache directory: %m"
+#~ msgstr "ಒಂದು ತಾತ್ಕಾಲಿಕ ಕೋಶವನ್ನು ರಚಿಸು"
+
+#, fuzzy
+#~ msgid "error renaming temporary cache directory: %m"
+#~ msgstr "ಒಂದು ತಾತ್ಕಾಲಿಕ ಕೋಶವನ್ನು ರಚಿಸು"
+
+#, fuzzy
+#~ msgid "virt-df: cannot use -h and --csv options together\n"
+#~ msgstr "%s: --listen ಹಾಗು --file ಆಯ್ಕೆಗಳನ್ನು ಒಟ್ಟಿಗೆ ಬಳಸುವಂತಿಲ್ಲ\n"
+
+#, fuzzy
+#~ msgid " Mountpoints:\n"
+#~ msgstr "ಆರೋಹಣಾತಾಣವನ್ನು ತೋರಿಸು"
+
+#, fuzzy
+#~ msgid " Filesystems:\n"
+#~ msgstr "ಕಡತವ್ಯವಸ್ಥೆಯನ್ನು ರಚಿಸು"
+
+#~ msgid "allocate an image"
+#~ msgstr "ಒಂದು ಚಿತ್ರವನ್ನು ನಿಯೋಜಿಸು"
+
+#~ msgid "edit a file in the image"
+#~ msgstr "ಚಿತ್ರದಲ್ಲಿನ ಒಂದು ಕಡತವನ್ನು ಸಂಪಾದಿಸಿ"
+
+#~ msgid "view a file in the pager"
+#~ msgstr "ಒಂದು ಕಡತವನ್ನು ಪೇಜರಿನಲ್ಲಿ ನೋಡು"
+
+#~ msgid ""
+#~ "echo - display a line of text\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " This echos the parameters to the terminal.\n"
+#~ msgstr ""
+#~ "echo - ಒಂದು ಪಠ್ಯದ ಸಾಲನ್ನು ತೋರಿಸುತ್ತದೆ\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " ಇದು ನಿಯತಾಂಕಗಳನ್ನು ಟರ್ಮಿನಲ್ಗೆ ಪ್ರತಿಧ್ವನಿಸುತ್ತದೆ(ಎಕೊ).\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "edit - edit a file in the image\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " This is used to edit a file.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\", editing locally, and then \"write\".\n"
+#~ "\n"
+#~ " Normally it uses $EDITOR, but if you use the aliases\n"
+#~ " \"vi\" or \"emacs\" you will get those editors.\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "edit - ಚಿತ್ರಿಕೆಯಲ್ಲಿನ ಕಡತವನ್ನು ಸಂಪಾದಿಸುತ್ತದೆ\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " ಕಡತವನ್ನು ಸಂಪಾದಿಸಲು ಇದನ್ನು ಬಳಸಲಾಗುತ್ತದೆ.\n"
+#~ "\n"
+#~ " ಇದು \"cat\" ಅನ್ನು ಚಲಾಯಿಸಿ, ಸ್ಥಳೀಯವಾಗಿ ಬದಲಾಯಿಸಿ, ನಂತರ \"write-file\" "
+#~ "ಅನ್ನು \n"
+#~ " ಚಲಾಯಿಸುವುದಕ್ಕೆ ಸಮನಾಗಿರುತ್ತದೆ (ಹಾಗು ಇದರಿಂದ ಅನ್ವಯಿಸಲಾಗುತ್ತದೆ).\n"
+#~ "\n"
+#~ " ಸಾಮಾನ್ಯವಾಗಿ ಇದು $EDITOR ಅನ್ನು ಬಳಸುತ್ತದೆ ಆದರೆ, ಆದರೆ ನೀವು \"vi\"\n"
+#~ " ಅಥವ \"emacs\" ಆಲಿಯಾಸ್ಗಳನ್ನು ಬಳಸಿದಲ್ಲಿ ಈ ಸಂಪಾದಕಗಳು ದೊರೆಯುತ್ತವೆ.\n"
+#~ "\n"
+#~ " ಸೂಚನೆ: ಇದು ದೊಡ್ಡದಾದ ಕಡತಗಳಲ್ಲಿ (> 2 MB) ಅಥವ \\0 ಬೈಟ್ಗಳನ್ನು\n"
+#~ " ಹೊಂದಿರುವ ಬೈನರಿ ಕಡತಗಳಲ್ಲಿ ಸಮರ್ಪಕವಾಗಿ ಕೆಲಸ ಮಾಡುವುದಿಲ್ಲ.\n"
+
+#~ msgid ""
+#~ "lcd - local change directory\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " Change guestfish's current directory. This command is\n"
+#~ " useful if you want to download files to a particular\n"
+#~ " place.\n"
+#~ msgstr ""
+#~ "lcd - ಕೋಶವನ್ನು ಸ್ಥಳೀಯವಾಗಿ ಬದಲಾಯಿಸುವಿಕೆ\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " guestfish ನ ಪ್ರಸಕ್ತ ಕೋಶವನ್ನು ಬದಲಾಯಿಸಿ. ಕಡತಗಳನ್ನು ನಿಶ್ಚಿತ ಸ್ಥಳಕ್ಕೆ \n"
+#~ " ಡೌನ್ಲೋಡ್ ಮಾಡಲು ನೀವು ಬಯಸಿದಲ್ಲಿ ಇದು\n"
+#~ " ಸಹಾಯಕವಾಗುತ್ತದೆ.\n"
+
+#~ msgid ""
+#~ "glob - expand wildcards in command\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob runs <command> with wildcards expanded in any\n"
+#~ " command args. Note that the command is run repeatedly\n"
+#~ " once for each expanded argument.\n"
+#~ msgstr ""
+#~ "glob - ಆಜ್ಞೆಯಲ್ಲಿ ವೈಲ್ಡ್ಕಾರ್ಡನ್ನು ಹಿಗ್ಗಿಸು\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob ಯಾವುದೆ ಆಜ್ಞೆಯ ಆರ್ಗ್ಯುಮೆಂಟ್ಗಳಲ್ಲಿ ಹಿಗ್ಗಿಸಲಾದ ವೈಲ್ಡ್ಕಾರ್ಡುಗಳೊಂದಿಗೆ \n"
+#~ " <command> ಅನ್ನು ಚಲಾಯಿಸುತ್ತದೆ. ಹಿಗ್ಗಿಸಲಾದ ಪ್ರತಿಯೊಂದು ಆರ್ಗ್ಯುಮೆಂಟ್ಗಳೊಂದಿಗೆ\n"
+#~ " ಆಜ್ಞೆಯನ್ನು ಮತ್ತೆ ಮತ್ತೆ ಚಲಾಯಿಸಲಾಗುತ್ತದೆ ಎಂಬುದನ್ನು ನೆನಪಿಡಿ.\n"
+
+#~ msgid ""
+#~ "more - view a file in the pager\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " This is used to view a file in the pager.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\" and using the pager.\n"
+#~ "\n"
+#~ " Normally it uses $PAGER, but if you use the alias\n"
+#~ " \"less\" then it always uses \"less\".\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "more - ಕಡತವನ್ನು ಪೇಜರಿನಲ್ಲಿ ವೀಕ್ಷಿಸಿ\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " ಕಡತವನ್ನು ಪೇಜರಿನಲ್ಲಿ ವೀಕ್ಷಿಸಲು ಇದನ್ನು ಬಳಸಲಾಗುತ್ತದೆ.\n"
+#~ "\n"
+#~ " ಇದು \"cat\" ಅನ್ನು ಚಲಾಯಿಸಿ, ನಂತರ ಪೇಜರನ್ನು ಬಳಸುವುದಕ್ಕೆ \n"
+#~ " ಸಮನಾಗಿರುತ್ತದೆ (ಹಾಗು ಇದರಿಂದ ಅನ್ವಯಿಸಲಾಗುತ್ತದೆ).\n"
+#~ "\n"
+#~ " ಸಾಮಾನ್ಯವಾಗಿ ಇದು $PAGER ಅನ್ನು ಬಳಸುತ್ತದೆ ಆದರೆ, ಆದರೆ ನೀವು\n"
+#~ " \"less\" ಆಲಿಯಾಸ್ಗಳನ್ನು ಬಳಸಿದಲ್ಲಿ ಯಾವಗಲೂ \"less\" ಅನ್ನೇ ಬಳಸುತ್ತದೆ.\n"
+#~ "\n"
+#~ " ಸೂಚನೆ: ಇದು ದೊಡ್ಡದಾದ ಕಡತಗಳಲ್ಲಿ (> 2 MB) ಅಥವ \\0 ಬೈಟ್ಗಳನ್ನು\n"
+#~ " ಹೊಂದಿರುವ ಬೈನರಿ ಕಡತಗಳಲ್ಲಿ ಸಮರ್ಪಕವಾಗಿ ಕೆಲಸ ಮಾಡುವುದಿಲ್ಲ.\n"
+
+#~ msgid ""
+#~ "reopen - close and reopen the libguestfs handle\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
+#~ "this normally, because the handle is closed properly when guestfish\n"
+#~ "exits. However this is occasionally useful for testing.\n"
+#~ msgstr ""
+#~ "reopen - libguestfs ಹ್ಯಾಂಡಲ್ ಅನ್ನು ಮುಚ್ಚು ಅಥವ ಮರಳಿ ತೆರೆಯಿರಿ\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "libguestfs ಹ್ಯಾಂಡಲ್ ಅನ್ನು ಮುಚ್ಚು ಅಥವ ಮರಳಿ ತೆರೆಯಿರಿ. ಇದನ್ನು ಸಾಮಾನ್ಯವಾಗಿ ಬಳಸುವ\n"
+#~ "ಅಗತ್ಯವಿರುವುದಿಲ್ಲ, ಏಕೆಂದರೆ guestfish ನಿರ್ಗಮಿಸಿದಾಗ ಹ್ಯಾಂಡಲ್ ಸರಿಯಾಗಿ "
+#~ "ಮುಚ್ಚಲ್ಪಡುತ್ತದೆ.\n"
+#~ "ಆದರೆ ಇದು ಪರೀಕ್ಷಿಸುವ ಕಾರ್ಯದಲ್ಲಿ ಒಮ್ಮೊಮ್ಮೆ ಉಪಯೋಗಕ್ಕೆ ಬರುತ್ತದೆ.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "sparse - allocate a sparse image file\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty sparse file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " In all respects it works the same as the 'alloc'\n"
+#~ " command, except that the image file is allocated\n"
+#~ " sparsely, which means that disk blocks are not assigned\n"
+#~ " to the file until they are needed. Sparse disk files\n"
+#~ " only use space when written to, but they are slower\n"
+#~ " and there is a danger you could run out of real disk\n"
+#~ " space during a write operation.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
+#~ msgstr ""
+#~ "sparse - ಚದುರಿದ ಚಿತ್ರಿಕಾ ಕಡತವನ್ನು ನಿಯೋಜಿಸು\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " ಇದು ನಿಗದಿತ ಗಾತ್ರದ ಒಂದು ಖಾಲಿ ಚದುರಿದ ಕಡತವನ್ನು ರಚಿಸುತ್ತದೆ,\n"
+#~ " ಹಾಗು ನಂತರ ಪರಿಶೀಲನೆಗಾಗಿ ಅದನ್ನು ಸೇರಿಸಲಾಗುತ್ತದೆ.\n"
+#~ "\n"
+#~ " ಚಿತ್ರಿಕಾ ಕಡತವನ್ನು ವಿರಳವಾಗಿ ನಿಯೋಜಿಸಲಾಗುತ್ತದೆ ಎನ್ನುವುದನ್ನು ಹೊರತು ಪಡಿಸಿ\n"
+#~ " ಇದು ಎಲ್ಲಾ ರೀತಿಯಲ್ಲೂ 'alloc' ಆಜ್ಞೆಯ ರೀತಿಯಲ್ಲಿಯೆ ಕೆಲಸ ಮಾಡುತ್ತದೆ.\n"
+#~ " ಇದರರ್ಥ ಡಿಸ್ಕ್ ಖಂಡಗಳ ಅಗತ್ಯವಿರದ ಹೊರತು ಅವುಗಳನ್ನು ಕಡತಗಳಿಗೆ ನಿಯೋಜಿಸಲಾಗುವುದಿಲ್ಲ\n"
+#~ " ಎಂದರ್ಥ. ಚದುರಿದ ಡಿಸ್ಕ್ ಕಡತಗಳನ್ನು ಬರೆದಾಗ ಜಾಗವನ್ನು ಬಳಸಿಕೊಳ್ಳುತ್ತದೆ, ಆದರೆ ಈ\n"
+#~ " ಪ್ರಕ್ರಿಯೆಯು ನಿಧಾನಗತಿಯಲ್ಲಿರುತ್ತದೆ ಹಾಗು ಬರೆಯುವ ಸಮಯದಲ್ಲಿ ನಿಮ್ಮ ಡಿಸ್ಕ್ ಜಾಗವು\n"
+#~ " ತೀರಿನ ಹೋಗುವ ಅಪಾಯವಿರುತ್ತದೆ\n"
+#~ "\n"
+#~ " ಹೆಚ್ಚಿನ ಸುಧಾರಿತ ಚಿತ್ರಿಕಾ ರಚನೆಯ ಬಗೆಗಿನ ಮಾಹಿತಿಗಾಗಿ qemu-img ಸವಲತ್ತನ್ನು "
+#~ "ನೋಡಿ.\n"
+#~ " ಗಾತ್ರವನ್ನು ಹೀಗೆ ಸೂಚಿಸಬಹುದು (where <nn> means a number):\n"
+#~ " <nn> ಕಿಲೋಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " ಉದಾ: 1440 ಶಿಷ್ಟ 3.5\" ಫ್ಲಾಪಿ\n"
+#~ " <nn>K ಅಥವ <nn>KB ಕಿಲೋಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>M ಅಥವ <nn>MB ಮೆಗಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>G ಅಥವ <nn>GB ಗಿಗಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>T ಅಥವ <nn>TB ಟೆರಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>P ಅಥವ <nn>PB ಪಿಟಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>E ಅಥವ <nn>EB ಎಕ್ಸಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>sects 512 ಬೈಟ್ ವಿಭಾಗಗಳ ಸಂಖ್ಯೆ\n"
+
+#~ msgid ""
+#~ "time - measure time taken to run command\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " This runs <command> as usual, and prints the elapsed\n"
+#~ " time afterwards.\n"
+#~ msgstr ""
+#~ "time - ಆಜ್ಞೆಯನ್ನು ಚಲಾಯಿಸಲು ತಗಲುವ ಸಮಯವನ್ನು ಲೆಕ್ಕಹಾಕಿ\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " ಇದು <command> ಅನ್ನು ಸಾಮಾನ್ಯ ಕ್ರಮದಲ್ಲಿಯೆ ಚಲಾಯಿಸುತ್ತದೆ, ಹಾಗು\n"
+#~ " ಕೊನೆಯಲ್ಲಿ ತಗುಲಿದ ಸಮಯವನ್ನು ತೋರಿಸುತ್ತದೆ.\n"
+
+#~ msgid "external command failed: %s"
+#~ msgstr "ಬಾಹ್ಯ ಆಜ್ಞೆಯು ವಿಫಲಗೊಂಡಿದೆ: %s"
+
+#~ msgid "test if file exists"
+#~ msgstr "ಕಡತವು ಅಸ್ತಿತ್ವದಲ್ಲಿದ್ದರೆ ಪರೀಕ್ಷಿಸು"
+
+#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
+#~ msgstr "%s ಅಥವ %s ವು LIBGUESTFS_PATH ನಲ್ಲಿ ಕಂಡು ಬಂದಿಲ್ಲ (ಪ್ರಸಕ್ತ ಮಾರ್ಗ = %s)"
+
+#~ msgid "failed to connect to vmchannel socket"
+#~ msgstr "vmchannel ಸಾಕೆಟ್ನೊಂದಿಗೆ ಸಂಪರ್ಕ ಸಾಧಿಸುವಲ್ಲಿ ವಿಫಲಗೊಂಡಿದೆ"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
+#~ "selinux\n"
+#~ msgstr ""
+#~ "%s: -a, -m, --listen, --remote ಅಥವ --selinux ದೊಂದಿಗೆ -i ಎಂಬ ಅಯ್ಕೆಯನ್ನು "
+#~ "ಬಳಸುವಂತಿಲ್ಲ\n"
+
+#, fuzzy
+#~ msgid "cpio command failed: {error}"
+#~ msgstr "ಆಜ್ಞೆಯು ವಿಫಲಗೊಂಡಿದೆ: %s"
+
+#~ msgid ""
+#~ "alloc - allocate an image\n"
+#~ " alloc <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty (zeroed) file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified (where <nn> means a number):\n"
+#~ " <nn> number of kilobytes\n"
+#~ " eg: 1440 standard 3.5\" floppy\n"
+#~ " <nn>K or <nn>KB number of kilobytes\n"
+#~ " <nn>M or <nn>MB number of megabytes\n"
+#~ " <nn>G or <nn>GB number of gigabytes\n"
+#~ " <nn>T or <nn>TB number of terabytes\n"
+#~ " <nn>P or <nn>PB number of petabytes\n"
+#~ " <nn>E or <nn>EB number of exabytes\n"
+#~ " <nn>sects number of 512 byte sectors\n"
+#~ msgstr ""
+#~ "alloc - ಒಂದು ಚಿತ್ರವನ್ನು ನಿಯೋಜಿಸು\n"
+#~ " alloc <filename> <size>\n"
+#~ "\n"
+#~ " ಇದು ಒಂದು ಒದಗಿಸಲಾದ ಗಾತ್ರವನ್ನು ಹೊಂದಿದ ಒಂದು ಖಾಲಿ(ಸೊನ್ನೆಗಳನ್ನು ಹೊಂದಿರುವ) "
+#~ "ಕಡತವನ್ನು ರಚಿಸುತ್ತದೆ,\n"
+#~ " ನಂತರ ಹೆಚ್ಚಿನ ಪರಿಶೀಲನೆಗಾಗಿ ಸೇರಿಸಲಾಗುತ್ತದೆ.\n"
+#~ "\n"
+#~ " ಹೆಚ್ಚಿನ ಸುಧಾರಿತ ಚಿತ್ರಿಕಾ ರಚನೆಯ ಬಗೆಗಿನ ಮಾಹಿತಿಗಾಗಿ qemu-img ಸವಲತ್ತನ್ನು "
+#~ "ನೋಡಿ.\n"
+#~ "\n"
+#~ " ಗಾತ್ರವನ್ನು ಹೀಗೆ ಸೂಚಿಸಬಹುದು (where <nn> means a number):\n"
+#~ " <nn> ಕಿಲೋಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " ಉದಾ: 1440 ಶಿಷ್ಟ 3.5\" ಫ್ಲಾಪಿ\n"
+#~ " <nn>K ಅಥವ <nn>KB ಕಿಲೋಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>M ಅಥವ <nn>MB ಮೆಗಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>G ಅಥವ <nn>GB ಗಿಗಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>T ಅಥವ <nn>TB ಟೆರಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>P ಅಥವ <nn>PB ಪಿಟಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>E ಅಥವ <nn>EB ಎಕ್ಸಾಬೈಟ್ಗಳ ಸಂಖ್ಯೆ\n"
+#~ " <nn>sects 512 ಬೈಟ್ ವಿಭಾಗಗಳ ಸಂಖ್ಯೆ\n"
+
+#~ msgid "%s: virt-inspector command too long for fixed-size buffer\n"
+#~ msgstr "%s: virt-inspector ಎನ್ನುವುದು ನಿಶ್ಚಿತ ಬಫರಿಗಾಗಿ ಬಹಳ ಉದ್ದವಾಗಿದೆ\n"
+
+#~ msgid "%s: failed to write XML document\n"
+#~ msgstr "%s: XML ದಸ್ತಾವೇಜನ್ನು ಬರೆಯುವಲ್ಲಿ ವಿಫಲಗೊಂಡಿದೆ\n"
+
+#~ msgid "hivexml: missing name of input file\n"
+#~ msgstr "hivexml: ಇನ್ಪುಟ್ ಕಡತದ ಹೆಸರು ಕಾಣಿಸುತ್ತಿಲ್ಲ\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "Welcome to hivexsh, the hivex interactive shell for examining\n"
+#~ "Windows Registry binary hive files.\n"
+#~ "\n"
+#~ "Type: 'help' for help summary\n"
+#~ " 'quit' to quit the shell\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "hivexsh ಗೆ ಸ್ವಾಗತ, hivex ಎನ್ನುವುದು Windows ರಿಜಿಸ್ಟ್ರಿ ಬೈನರಿ ಕಡತಗಳನ್ನು "
+#~ "ಪರಿಶೀಲಿಸುವ \n"
+#~ "ಒಂದು ಸಂವಾದಾತ್ಮಕವಾದ ಶೆಲ್ ಆಗಿದೆ.\n"
+#~ "\n"
+#~ "ಹೀಗೆ ನಮೂದಿಸಿ: ನೆರವಿನ ಸಾರಾಂಶಕ್ಕಾಗಿ 'help' ಎಂದು \n"
+#~ " ನಿರ್ಗಮಿಸಲು 'quit ಎಂದು'\n"
+#~ "\n"
+
+#~ msgid "hivexsh: error getting parent of node %zu\n"
+#~ msgstr "hivexsh: %zu ನ ಮೂಲ ನೋಡ್ ಅನ್ನು ಪಡೆದುಕೊಳ್ಳುವಲ್ಲಿ ದೋಷ\n"
+
+#~ msgid "hivexsh: error getting node name of node %zx\n"
+#~ msgstr "hivexsh: %zu ನ ಮೂಲ ನೋಡ್ ಹೆಸರನ್ನು ಪಡೆದುಕೊಳ್ಳುವಲ್ಲಿ ದೋಷ\n"
+
+#~ msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
+#~ msgstr ""
+#~ "hivexsh: ನೀವು ಮೊದಲಿಗೆ 'load hivefile' ಅನ್ನು ಬಳಸಿಕೊಂಡು ಒಂದು ಹೈವ್ ಕಡತವನ್ನು ಲೋಡ್ "
+#~ "ಮಾಡಬೇಕು\n"
+
+#~ msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
+#~ msgstr "hivexsh: ಗೊತ್ತಿಲ್ಲದ ಆಜ್ಞೆ '%s', ನೆರವಿನ ಸಾರಾಂಶಕ್ಕಾಗಿ 'help' ಅನ್ನು ಬಳಸಿ\n"
+
+#~ msgid "hivexsh: load: no hive file name given to load\n"
+#~ msgstr "hivexsh: load: ಲೋಡ್ ಮಾಡಲು ಯಾವುದೆ ಹೈವ್ ಕಡತದ ಹೆಸರನ್ನು ನೀಡಲಾಗಿಲ್ಲ\n"
+
+#~ msgid ""
+#~ "hivexsh: failed to open hive file: %s: %m\n"
+#~ "\n"
+#~ "If you think this file is a valid Windows binary hive file (_not_\n"
+#~ "a regedit *.reg file) then please run this command again using the\n"
+#~ "hivexsh option '-d' and attach the complete output _and_ the hive file\n"
+#~ "which fails into a bug report at https://bugzilla.redhat.com/\n"
+#~ "\n"
+#~ msgstr ""
+#~ "hivexsh: ಹೈವ್ ಕಡತವನ್ನು ತೆರೆಯಲಾಗಿಲ್ಲ: %s: %m\n"
+#~ "\n"
+#~ "ಇದು ಒಂದು Windows ಬೈನರಿ ಹೈವ್ ಕಡತವಾಗಿದೆ ಎಂದು ನೀವು ಭಾವಿಸಿದಲ್ಲಿ (ಒಂದು \n"
+#~ "regedit *.reg _ಕಡತವಾಗಿಲ್ಲದೆ_ ಇದ್ದಲ್ಲಿ) hivexsh ಆಯ್ಕೆ '-d' ಅನ್ನು ಬಳಸಿಕೊಂಡು \n"
+#~ "ಈ ಆಜ್ಞೆಯನ್ನು ಪುನಃ ಚಲಾಯಿಸಿ ಹಾಗು https://bugzilla.redhat.com/ ನಲ್ಲಿ ಒಂದು "
+#~ "ದೋಷವನ್ನು\n"
+#~ "ವರದಿ ಮಾಡಿ ಮತ್ತು ಸಂಪೂರ್ಣ ಔಟ್ಪುಟ್ ಅನ್ನು _ಹಾಗು_ ವಿಫಲಗೊಂಡಂತಹ ಹೈವ್ ಕಡತವನ್ನು ಅದಕ್ಕೆ "
+#~ "ಲಗತ್ತಿಸಿ\n"
+#~ "\n"
+
+#~ msgid "hivexsh: '%s' command should not be given arguments\n"
+#~ msgstr "hivexsh: '%s' ಎಂಬ ಆಜ್ಞೆಯೊಂದಿಗೆ ಆರ್ಗುಮೆಂಟ್ಗಳನ್ನು ಒದಗಿಸುವಂತಿಲ್ಲ\n"
+
+#~ msgid ""
+#~ "%s: %s: \\ characters in path are doubled - are you escaping the path "
+#~ "parameter correctly?\n"
+#~ msgstr ""
+#~ "%s: %s: \\ ಮಾರ್ಗದಲ್ಲಿರುವ ಅಕ್ಷರಗಳನ್ನು ಎರಡು ಬಾರಿ ನಮೂದಿಸಲಾಗಿದೆ - ನೀವು ಮಾರ್ಗದ "
+#~ "ನಿಯತಾಂಕಗಳನ್ನು ಸರಿಯಾಗಿ ತಪ್ಪಿಸುತ್ತಿದ್ದೀರೆ?\n"
+
+#~ msgid "hivexsh: cd: subkey '%s' not found\n"
+#~ msgstr "hivexsh: cd: ಉಪಕೀಲಿ '%s' ಕಂಡುಬಂದಿಲ್ಲ\n"
+
+#~ msgid ""
+#~ "Navigate through the hive's keys using the 'cd' command, as if it\n"
+#~ "contained a filesystem, and use 'ls' to list the subkeys of the\n"
+#~ "current key. Full documentation is in the hivexsh(1) manual page.\n"
+#~ msgstr ""
+#~ "'cd' ಆಜ್ಞೆಯನ್ನು ಬಳಸಿಕೊಂಡು ಹೈವ್ನ ಕೀಲಿಗಳು ಒಂದು ಕಡತವ್ಯವಸ್ಥೆಯಲ್ಲಿರುವಂತೆ\n"
+#~ "ವೀಕ್ಷಿಸಿ ಪ್ರಸಕ್ತ ಕೀಲಿಯ ಉಪಕೀಲಿಗಳ ಪಟ್ಟಿಯನ್ನು ನೋಡಲು 'ls' ಅನ್ನು ಬಳಸಿ.\n"
+#~ "ಸಂಪೂರ್ಣ ದಸ್ತಾವೇಜು hivexsh(1) ಮಾರ್ಗದರ್ಶಿ ಪುಟದಲ್ಲಿದೆ.\n"
+
+#~ msgid "%s: %s: key not found\n"
+#~ msgstr "%s: %s: ಕೀಲಿಯು ಕಂಡುಬಂದಿಲ್ಲ\n"
+
+#~ msgid "hivexsh: setval: unexpected end of input\n"
+#~ msgstr "hivexsh: setval: ಇನ್ಪುಟ್ಗೆ ಅನಿರೀಕ್ಷಿತವಾದ ಅಂತ್ಯ\n"
+
+#~ msgid ""
+#~ "hivexsh: string(utf16le): only 7 bit ASCII strings are supported for "
+#~ "input\n"
+#~ msgstr ""
+#~ "hivexsh: string(utf16le): ಇನ್ಪುಟ್ನಲ್ಲಿ ಕೇವಲ 7 ಬಿಟ್ ASCII ವಾಕ್ಯಗಳನ್ನು ಮಾತ್ರ "
+#~ "ಬೆಂಬಲಿಸಲಾಗುತ್ತದೆ\n"
+
+#~ msgid "hivexsh: setval: trailing garbage after hex string\n"
+#~ msgstr "hivexsh: setval: ಹೆಕ್ಸ್ ವಾಕ್ಯದ ನಂತರ ಹಿಂಬಾಲಿಸುವ ಗಾರ್ಬೇಜ್\n"
+
+#~ msgid ""
+#~ "hivexsh: setval: cannot parse value string, please refer to the man page "
+#~ "hivexsh(1) for help: %s\n"
+#~ msgstr ""
+#~ "hivexsh: setval: ಮೌಲ್ಯದ ವಾಕ್ಯವನ್ನು ಪಾರ್ಸ್ ಮಾಡಲು ಸಾಧ್ಯವಾಗಿಲ್ಲ, ದಯವಿಟ್ಟು ನೆರವಿಗಾಗಿ "
+#~ "hivexsh(1) ಅನ್ನು ನೋಡಿ: %s\n"
+
+#~ msgid "hivexsh: del: the root node cannot be deleted\n"
+#~ msgstr "hivexsh: del: ಮೂಲ ನೋಡ್ ಅನ್ನು ಅಳಿಸಲು ಸಾಧ್ಯವಿಲ್ಲ\n"