+#: tools/virt-list-filesystems.pl:142
+msgid "virt-list-filesystems: no image or VM name given"
+msgstr ""
+
+#: tools/virt-list-partitions.pl:152
+msgid "virt-list-partitions: no image or VM name given"
+msgstr ""
+
+#: tools/virt-make-fs.pl:291
+msgid "virt-make-fs input output\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:321
+msgid "unexpected output from 'du' command"
+msgstr ""
+
+#: tools/virt-make-fs.pl:333 tools/virt-make-fs.pl:347
+#: tools/virt-make-fs.pl:458
+#, perl-brace-format
+msgid "{f}: unknown input format: {fmt}\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:391
+#, perl-brace-format
+msgid "virt-make-fs: cannot parse size parameter: {sz}\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:406
+#, fuzzy
+msgid ""
+"qemu-img create: failed to create disk image, see earlier error messages\n"
+msgstr "guestfs_launch विफल, पहले की त्रुटि संदेश देखें"
+
+#: tools/virt-make-fs.pl:417
+msgid "virt-make-fs: NTFS support was disabled when libguestfs was compiled\n"
+msgstr ""
+
+#: tools/virt-make-fs.pl:442
+#, fuzzy
+msgid "tar: failed, see earlier messages\n"
+msgstr "guestfs_launch विफल, पहले की त्रुटि संदेश देखें"
+
+#: tools/virt-make-fs.pl:464
+#, fuzzy
+msgid "uncompress command failed, see earlier messages\n"
+msgstr "guestfs_launch विफल, पहले की त्रुटि संदेश देखें"
+
+#: tools/virt-make-fs.pl:499
+msgid ""
+"virt-make-fs: error copying contents into filesystem\n"
+"An error here usually means that the program did not estimate the\n"
+"filesystem size correctly. Please read the BUGS section of the manpage.\n"
+msgstr ""
+
+#: tools/virt-tar.pl:183 tools/virt-tar.pl:190
+msgid "virt-tar: extract/upload mode specified twice on the command line\n"
+msgstr ""
+
+#: tools/virt-tar.pl:212
+msgid "virt-tar: no image, VM names, directory or filename given"
+msgstr ""
+
+#: tools/virt-tar.pl:215
+msgid "virt-tar: either -x or -u must be specified on the command line\n"
+msgstr ""
+
+#: tools/virt-tar.pl:226
+#, perl-brace-format
+msgid "virt-tar: {tarball}: file not found\n"
+msgstr ""
+
+#: tools/virt-tar.pl:229
+#, perl-brace-format
+msgid "virt-tar: {dir}: directory name must start with '/' character\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:201
+msgid "no libvirt domain name or disk image given\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:240
+msgid ""
+"expecting 1 or 2 more parameters, subkey path and optionally the value to "
+"export\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:351
+#, perl-brace-format
+msgid "virt-win-reg: {p}: not a supported Windows Registry path\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:368 tools/virt-win-reg.pl:390
+#, perl-brace-format
+msgid "virt-win-reg: {p}: file not found in guest: {err}\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:375
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not download registry file: {err}\n"
+msgstr ""
+
+#: tools/virt-win-reg.pl:397
+#, perl-brace-format
+msgid "virt-win-reg: {p}: could not upload registry file: {err}\n"
+msgstr ""
+
+#, fuzzy
+#~ msgid "%s: temporary directory not found"
+#~ msgstr "%s: को अस्थायी निर्देशिका नहीं बना सकता है"
+
+#~ msgid "unexpected end of file when reading from daemon"
+#~ msgstr "डेमॉन से पढ़ने के दौरान फाइल का अप्रत्याशित अंत"
+
+#~ msgid "libguestfs-test-tool: failed to mkdir /iso\n"
+#~ msgstr "libguestfs-test-tool: failed to mkdir /iso\n"
+
+#~ msgid "libguestfs-test-tool: failed to mount /dev/sdb on /iso\n"
+#~ msgstr "libguestfs-test-tool: failed to mount /dev/sdb on /iso\n"
+
+#~ msgid ""
+#~ "libguestfs-test-tool: could not run helper program, or helper failed\n"
+#~ msgstr ""
+#~ "libguestfs-test-tool: could not run helper program, or helper failed\n"
+
+#~ msgid ""
+#~ "Test tool helper program 'libguestfs-test-tool-helper' is not\n"
+#~ "available. Expected to find it in '%s'\n"
+#~ "\n"
+#~ "Use the --helper option to specify the location of this program.\n"
+#~ msgstr ""
+#~ "Test tool helper program 'libguestfs-test-tool-helper' is not\n"
+#~ "available. Expected to find it in '%s'\n"
+#~ "\n"
+#~ "Use the --helper option to specify the location of this program.\n"
+
+#~ msgid "command failed: %s"
+#~ msgstr "कमांड विफल: %s"
+
+#~ msgid ""
+#~ "Test tool helper program %s\n"
+#~ "is not statically linked. This is a build error when this test tool\n"
+#~ "was built.\n"
+#~ msgstr ""
+#~ "टेस्ट टूल हेल्पर प्रोग्राम %s\n"
+#~ "स्थैतिक रूप से लिंक नहीं है. यह एक बिल्ड त्रुटि है जब यह जाँच टूल\n"
+#~ "बनाया गया था.\n"
+
+#~ msgid "mkisofs command failed: %s\n"
+#~ msgstr "mkisofs कमांड विफल: %s\n"
+
+#, fuzzy
+#~ msgid "virt-resize: {file}: does not exist or is not readable\n"
+#~ msgstr "द्विपदीय '%s' मौजूद नहीं है या निष्पादनीय नहीं है\n"
+
+#, fuzzy
+#~ msgid "virt-resize: no logical volume called {n}\n"
+#~ msgstr "LVM लॉजिकल वाल्यूम का आकार बदलें"
+
+#, fuzzy
+#~ msgid "failed to create temporary cache directory: %m"
+#~ msgstr "एक अस्थायी निर्देशिका बनाएँ"
+
+#, fuzzy
+#~ msgid "error renaming temporary cache directory: %m"
+#~ msgstr "एक अस्थायी निर्देशिका बनाएँ"
+
+#, fuzzy
+#~ msgid "virt-df: cannot use -h and --csv options together\n"
+#~ msgstr "%s: cannot use --listen and --file options at the same time\n"
+
+#, fuzzy
+#~ msgid " Mountpoints:\n"
+#~ msgstr "आरोहबिंदु दिखाएँ"
+
+#, fuzzy
+#~ msgid " Filesystems:\n"
+#~ msgstr "फाइलसिस्टम बनाएँ"
+
+#~ msgid "allocate an image"
+#~ msgstr "छवि आबंटित करें"
+
+#~ msgid "edit a file in the image"
+#~ msgstr "छवि में कोई फाइल संपादित करें"
+
+#~ msgid "view a file in the pager"
+#~ msgstr "पेजर में फाइल देखें"
+
+#~ msgid ""
+#~ "echo - display a line of text\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " This echos the parameters to the terminal.\n"
+#~ msgstr ""
+#~ "echo - display a line of text\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " This echos the parameters to the terminal.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "edit - edit a file in the image\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " This is used to edit a file.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\", editing locally, and then \"write\".\n"
+#~ "\n"
+#~ " Normally it uses $EDITOR, but if you use the aliases\n"
+#~ " \"vi\" or \"emacs\" you will get those editors.\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "edit - edit a file in the image\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " This is used to edit a file.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\", editing locally, and then \"write-file\".\n"
+#~ "\n"
+#~ " Normally it uses $EDITOR, but if you use the aliases\n"
+#~ " \"vi\" or \"emacs\" you will get those editors.\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+
+#~ msgid ""
+#~ "lcd - local change directory\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " Change guestfish's current directory. This command is\n"
+#~ " useful if you want to download files to a particular\n"
+#~ " place.\n"
+#~ msgstr ""
+#~ "lcd - local change directory\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " Change guestfish's current directory. This command is\n"
+#~ " useful if you want to download files to a particular\n"
+#~ " place.\n"
+
+#~ msgid ""
+#~ "glob - expand wildcards in command\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob runs <command> with wildcards expanded in any\n"
+#~ " command args. Note that the command is run repeatedly\n"
+#~ " once for each expanded argument.\n"
+#~ msgstr ""
+#~ "glob - expand wildcards in command\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob runs <command> with wildcards expanded in any\n"
+#~ " command args. Note that the command is run repeatedly\n"
+#~ " once for each expanded argument.\n"
+
+#~ msgid ""
+#~ "more - view a file in the pager\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " This is used to view a file in the pager.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\" and using the pager.\n"
+#~ "\n"
+#~ " Normally it uses $PAGER, but if you use the alias\n"
+#~ " \"less\" then it always uses \"less\".\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "more - view a file in the pager\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " This is used to view a file in the pager.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\" and using the pager.\n"
+#~ "\n"
+#~ " Normally it uses $PAGER, but if you use the alias\n"
+#~ " \"less\" then it always uses \"less\".\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+
+#~ msgid ""
+#~ "reopen - close and reopen the libguestfs handle\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
+#~ "this normally, because the handle is closed properly when guestfish\n"
+#~ "exits. However this is occasionally useful for testing.\n"
+#~ msgstr ""
+#~ "reopen - close and reopen the libguestfs handle\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
+#~ "this normally, because the handle is closed properly when guestfish\n"
+#~ "exits. However this is occasionally useful for testing.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "sparse - allocate a sparse image file\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty sparse file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " In all respects it works the same as the 'alloc'\n"
+#~ " command, except that the image file is allocated\n"
+#~ " sparsely, which means that disk blocks are not assigned\n"
+#~ " to the file until they are needed. Sparse disk files\n"
+#~ " only use space when written to, but they are slower\n"
+#~ " and there is a danger you could run out of real disk\n"
+#~ " space during a write operation.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
+#~ msgstr ""
+#~ "sparse - allocate a sparse image file\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty sparse file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " In all respects it works the same as the 'alloc'\n"
+#~ " command, except that the image file is allocated\n"
+#~ " sparsely, which means that disk blocks are not assigned\n"
+#~ " to the file until they are needed. Sparse disk files\n"
+#~ " only use space when written to, but they are slower\n"
+#~ " and there is a danger you could run out of real disk\n"
+#~ " space during a write operation.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified (where <nn> means a number):\n"
+#~ " <nn> number of kilobytes\n"
+#~ " eg: 1440 standard 3.5\" floppy\n"
+#~ " <nn>K or <nn>KB number of kilobytes\n"
+#~ " <nn>M or <nn>MB number of megabytes\n"
+#~ " <nn>G or <nn>GB number of gigabytes\n"
+#~ " <nn>T or <nn>TB number of terabytes\n"
+#~ " <nn>P or <nn>PB number of petabytes\n"
+#~ " <nn>E or <nn>EB number of exabytes\n"
+#~ " <nn>sects number of 512 byte sectors\n"
+
+#~ msgid ""
+#~ "time - measure time taken to run command\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " This runs <command> as usual, and prints the elapsed\n"
+#~ " time afterwards.\n"
+#~ msgstr ""
+#~ "time - measure time taken to run command\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " This runs <command> as usual, and prints the elapsed\n"
+#~ " time afterwards.\n"
+
+#~ msgid "external command failed: %s"
+#~ msgstr "बाहरी कमांड विफल: %s"
+
+#~ msgid "test if file exists"
+#~ msgstr "जाँचें यदि फाइल मौजूद है"
+
+#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
+#~ msgstr "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
+
+#~ msgid "failed to connect to vmchannel socket"
+#~ msgstr "vmchannel सॉकेट कनेक्ट होने में विफल"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
+#~ "selinux\n"
+#~ msgstr ""
+#~ "%s: cannot use -i option with -a, -m, --listen, --remote or --selinux\n"
+
+#, fuzzy
+#~ msgid "cpio command failed: {error}"
+#~ msgstr "कमांड विफल: %s"
+
+#~ msgid ""
+#~ "alloc - allocate an image\n"
+#~ " alloc <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty (zeroed) file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified (where <nn> means a number):\n"
+#~ " <nn> number of kilobytes\n"
+#~ " eg: 1440 standard 3.5\" floppy\n"
+#~ " <nn>K or <nn>KB number of kilobytes\n"
+#~ " <nn>M or <nn>MB number of megabytes\n"
+#~ " <nn>G or <nn>GB number of gigabytes\n"
+#~ " <nn>T or <nn>TB number of terabytes\n"
+#~ " <nn>P or <nn>PB number of petabytes\n"
+#~ " <nn>E or <nn>EB number of exabytes\n"
+#~ " <nn>sects number of 512 byte sectors\n"
+#~ msgstr ""
+#~ "alloc - allocate an image\n"
+#~ " alloc <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty (zeroed) file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified (where <nn> means a number):\n"
+#~ " <nn> number of kilobytes\n"
+#~ " eg: 1440 standard 3.5\" floppy\n"
+#~ " <nn>K or <nn>KB number of kilobytes\n"
+#~ " <nn>M or <nn>MB number of megabytes\n"
+#~ " <nn>G or <nn>GB number of gigabytes\n"
+#~ " <nn>T or <nn>TB number of terabytes\n"
+#~ " <nn>P or <nn>PB number of petabytes\n"
+#~ " <nn>E or <nn>EB number of exabytes\n"
+#~ " <nn>sects number of 512 byte sectors\n"
+
+#~ msgid "%s: virt-inspector command too long for fixed-size buffer\n"
+#~ msgstr "%s: virt-inspector command too long for fixed-size buffer\n"