-
-#~ msgid "libguestfs-test-tool: failed to mkdir /iso\n"
-#~ msgstr "libguestfs-test-tool: mkdir /iso કરવાનું નિષ્ફળ\n"
-
-#~ msgid "libguestfs-test-tool: failed to mount /dev/sdb on /iso\n"
-#~ msgstr "libguestfs-test-tool: /iso પર mount /dev/sdb કરવાનું નિષ્ફળ\n"
-
-#~ msgid ""
-#~ "libguestfs-test-tool: could not run helper program, or helper failed\n"
-#~ msgstr ""
-#~ "libguestfs-test-tool: મદદકર્તા પ્રક્રિયા ને ચલાવી શક્યા નહિં, અથવા મદદકર્તા "
-#~ "નિષ્ફળ\n"
-
-#~ msgid ""
-#~ "Test tool helper program 'libguestfs-test-tool-helper' is not\n"
-#~ "available. Expected to find it in '%s'\n"
-#~ "\n"
-#~ "Use the --helper option to specify the location of this program.\n"
-#~ msgstr ""
-#~ "ચકાસણી સાધન પ્રક્રિયા 'libguestfs-test-tool-helper' એ ઉપલ્બધ\n"
-#~ "નથી. '%s'માં તેને શોધવા માટે આશા રાખેલ છે\n"
-#~ "\n"
-#~ "આ પ્રક્રિયાનાં સ્થાનને સ્પષ્ટ કરવા માટે --helper વિકલ્પને વાપરો.\n"
-
-#~ msgid "command failed: %s"
-#~ msgstr "આદેશ નિષ્ફળ: %s"
-
-#~ msgid ""
-#~ "Test tool helper program %s\n"
-#~ "is not statically linked. This is a build error when this test tool\n"
-#~ "was built.\n"
-#~ msgstr ""
-#~ "ચકાસણી સાધન મદદકરર્તા પ્રક્રિયા %s\n"
-#~ "એ સ્થિર રીતે કડી થયેલ નથી. આ બિલ્ડ ભૂલ છે જ્યારે આ ચકાસણી સાધન એ બિલ્ટ થયેલ હતુ.\n"
-
-#~ msgid "mkisofs command failed: %s\n"
-#~ msgstr "mkisofs આદેશ નિષ્ફળ: %s\n"
-
-#, fuzzy
-#~ msgid "virt-resize: {file}: does not exist or is not readable\n"
-#~ msgstr "બાઇનરી '%s' એ અસ્તિત્વ ધરાવતુ નથી અથવા એક્સિક્યૂટેબલ નથી\n"
-
-#, fuzzy
-#~ msgid "virt-resize: no logical volume called {n}\n"
-#~ msgstr "LVM લોજીકલ વોલ્યુમનું માપ બદલો"
-
-#, fuzzy
-#~ msgid "failed to create temporary cache directory: %m"
-#~ msgstr "કામચલાઉ ડિરેક્ટરીને બનાવો"
-
-#, fuzzy
-#~ msgid "error renaming temporary cache directory: %m"
-#~ msgstr "કામચલાઉ ડિરેક્ટરીને બનાવો"
-
-#, fuzzy
-#~ msgid "virt-df: cannot use -h and --csv options together\n"
-#~ msgstr "%s: સરખા સમયે --listen અને --file વિકલ્પોને વાપરી શકાતુ નથી\n"
-
-#, fuzzy
-#~ msgid " Mountpoints:\n"
-#~ msgstr "માઉન્ટબિંદુઓને બતાવો"
-
-#, fuzzy
-#~ msgid " Filesystems:\n"
-#~ msgstr "ફાઇલસિસ્ટમને બનાવો"
-
-#~ msgid "allocate an image"
-#~ msgstr "ઇમેજને ફાળવો"
-
-#~ msgid "edit a file in the image"
-#~ msgstr "ઇમેજામં ફાઇલને સુધારો"
-
-#~ msgid "view a file in the pager"
-#~ msgstr "પેજરમાં ફાઇલને દેખાડો"
-
-#~ msgid ""
-#~ "echo - display a line of text\n"
-#~ " echo [<params> ...]\n"
-#~ "\n"
-#~ " This echos the parameters to the terminal.\n"
-#~ msgstr ""
-#~ "echo - લખાણનાં વાક્યને દર્શાવો\n"
-#~ " echo [<params> ...]\n"
-#~ "\n"
-#~ " આ ટર્મિનલમાં પરિમાણોને ઇકો કરે છે.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "edit - edit a file in the image\n"
-#~ " edit <filename>\n"
-#~ "\n"
-#~ " This is used to edit a file.\n"
-#~ "\n"
-#~ " It is the equivalent of (and is implemented by)\n"
-#~ " running \"cat\", editing locally, and then \"write\".\n"
-#~ "\n"
-#~ " Normally it uses $EDITOR, but if you use the aliases\n"
-#~ " \"vi\" or \"emacs\" you will get those editors.\n"
-#~ "\n"
-#~ " NOTE: This will not work reliably for large files\n"
-#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
-#~ msgstr ""
-#~ "edit - ઇમેજમાં ફાઇલને સુધારો\n"
-#~ " <filename> નો ફેરફાર કરો\n"
-#~ "\n"
-#~ " ફાઇલને સુધારવા માટે વાપરેલ છે.\n"
-#~ "\n"
-#~ " તે \"cat\" ને ચલાવવા, સ્થાનિય રીતે સુધારવા, અને \"write-file\"(દ્દારા "
-#~ "અમલીકરણ થયેલ છે) નાં જેવુ જ છે.\n"
-#~ "\n"
-#~ " સામાન્ય રીતે તે $EDITOR વાપરે છે, પરંતુ જો તમે ઉપનામોને વાપરો તો\n"
-#~ " \"vi\" અથવા \"emacs\" તમે તે સંપાદકોને મેળવશો.\n"
-#~ "\n"
-#~ " નોંધ: આ \\0 bytes ને સમાવતી વિશાળ ફાઇલો (> 2 MB) અથવા બાઇનરી ફાઇલો માટે "
-#~ "ભરોસાપાત્ર કામ કરતુ નથી.\n"
-
-#~ msgid ""
-#~ "lcd - local change directory\n"
-#~ " lcd <directory>\n"
-#~ "\n"
-#~ " Change guestfish's current directory. This command is\n"
-#~ " useful if you want to download files to a particular\n"
-#~ " place.\n"
-#~ msgstr ""
-#~ "lcd - સ્થાનિય બદલાતી ડિરેક્ટરી\n"
-#~ " lcd <directory>\n"
-#~ "\n"
-#~ " guestfish ની હાલની ડિરેક્ટરીને બનાવો. આ આદેશ એ ઉપયોગી છે જો તમે ચોક્કસ "
-#~ "સ્થાનેથી ફાઇલોને ડાઉનલોડ કરવા માંગો તો.\n"
-
-#~ msgid ""
-#~ "glob - expand wildcards in command\n"
-#~ " glob <command> [<args> ...]\n"
-#~ "\n"
-#~ " Glob runs <command> with wildcards expanded in any\n"
-#~ " command args. Note that the command is run repeatedly\n"
-#~ " once for each expanded argument.\n"
-#~ msgstr ""
-#~ "glob - આદેશમાં વાઇલ્ડકાર્ડોને વિસ્તારો\n"
-#~ " glob <command> [<args> ...]\n"
-#~ "\n"
-#~ " Glob એ કોઇપણ આદેશ દલીલોમાં વિસ્તરેલ વાઇલ્ડકાર્ડો સાછે <command> ને ચલાવે છે.\n"
-#~ " નોંધો કે આ દેશ એ દરેક વિસ્તરેલ દલીલ માટે એકવાર વારંવાર ચાલે છે.\n"
-
-#~ msgid ""
-#~ "more - view a file in the pager\n"
-#~ " more <filename>\n"
-#~ "\n"
-#~ " This is used to view a file in the pager.\n"
-#~ "\n"
-#~ " It is the equivalent of (and is implemented by)\n"
-#~ " running \"cat\" and using the pager.\n"
-#~ "\n"
-#~ " Normally it uses $PAGER, but if you use the alias\n"
-#~ " \"less\" then it always uses \"less\".\n"
-#~ "\n"
-#~ " NOTE: This will not work reliably for large files\n"
-#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
-#~ msgstr ""
-#~ "more - પેજરમાં ફાઇલને જુઓ\n"
-#~ " વધારે <filename>\n"
-#~ "\n"
-#~ " આ પેજરમાં ફાઇલને જોવા માટે વાપરેલ છે.\n"
-#~ "\n"
-#~ " તે \"cat\" ને ચલાવવાનાં (અને તેના દ્દારા અમલીકરણ થયેલ છે) જેવુ જ છે અને પેજરને "
-#~ "વાપરી રહ્યા છે.\n"
-#~ "\n"
-#~ " સામાન્ય રીતે તે $PAGER ને વાપરે છે, પરંતુ જો તમે ઉપનામને \"less\" વાપરેલ હોય તો "
-#~ "પછી તે હંમેશા \"less\" ને વાપરે છે.\n"
-#~ "\n"
-#~ " નોંધ: આ \\0 બાઇટો ને સમાવતી મોટી ફાઇલો (> 2 MB) અથવા બાઇનરી ફાઇલો માટે ે "
-#~ "કામ કરશે નહtes.\n"
-
-#~ msgid ""
-#~ "reopen - close and reopen the libguestfs handle\n"
-#~ " reopen\n"
-#~ "\n"
-#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
-#~ "this normally, because the handle is closed properly when guestfish\n"
-#~ "exits. However this is occasionally useful for testing.\n"
-#~ msgstr ""
-#~ "reopen - libguestfs હેન્ડલને પુન:ખોલો અને બંધ કરો\n"
-#~ " પુન:ખોલો\n"
-#~ "\n"
-#~ "libguestfs હેન્ડલને પુન:ખોલો અને બંધ કરો. આ સામાન્ય રીતે વાપરવા માટે તે જરૂરી નથી, "
-#~ "કારણ કે હેન્ડલ એ બરાબર રીતે બંધ થયેલ છે જ્યારે guestfish એ બહાર નીકળે છે ત્યારે. "
-#~ "છતાંપણ આ ચકાસણી માટે અવારનવાર ઉપયોગી છે.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "sparse - allocate a sparse image file\n"
-#~ " sparse <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty sparse file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " In all respects it works the same as the 'alloc'\n"
-#~ " command, except that the image file is allocated\n"
-#~ " sparsely, which means that disk blocks are not assigned\n"
-#~ " to the file until they are needed. Sparse disk files\n"
-#~ " only use space when written to, but they are slower\n"
-#~ " and there is a danger you could run out of real disk\n"
-#~ " space during a write operation.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
-#~ msgstr ""
-#~ "sparse - sparse ઇમેજ ફાઇલને ફાળવો\n"
-#~ " sparse <filename> <size>\n"
-#~ "\n"
-#~ " આ આપેલ માપની ખાલી sparse ફાઇલને બનાવે છે,\n"
-#~ " અને પછી ઉમેરે છે તેથી તેનું આગળ નિરીક્ષણ કરી શકાય.\n"
-#~ "\n"
-#~ " બધાને માન રાખીને તે 'alloc' આદેશનાં જેવુ કામ કરે છે, આને બાદ કરતા જે ઇમેજ ફાઇલ ને "
-#~ "છૂટુછવાયેલ ફાળવેલ છે, એનો મતલબ એ કે ડિસ્ક બ્લોકો એ ફાઇલમાં\n"
-#~ " સોંપેલ નથી જ્યાં સુધી તેઓને જરૂર ન હોય.\n"
-#~ " Sparse ડિસ્ક ફાઇલો એ જગ્યાને વાપરે છે જ્યારે તેમાં લખાયેલ હોય, પરંતુ તેઓ ધીમાં છે\n"
-#~ " ત્યાં ખતરનાક છે જો તમે લખવાની ક્રિયા દરમ્યાન રીઅલ ડિસ્ક જગ્યાની બહાર ચલાવી "
-#~ "શકો તો.\n"
-#~ "\n"
-#~ " વધારે ઉન્નત ઇમેજ બનાવવા માટે, qemu-img ઉપયોગિતાને જુઓ.\n"
-#~ "\n"
-#~ " માપને સ્પષ્ટ કરી શકાય છે (જ્યાં <nn> નો મતલબ નંબર હોય):\n"
-#~ " <nn> કિલોબાઇટનો નંબર\n"
-#~ " દાત: 1440 મૂળભૂત 3.5\" ફ્લોપી\n"
-#~ " <nn>K અથવા કિલોબાઇટનો <nn>KB નંબર\n"
-#~ " <nn>M અથવા મેગાબાઇટોનો <nn>MB નંબર\n"
-#~ " <nn>G અથવા ગીગાબાઇટોનો <nn>GB નંબર\n"
-#~ " <nn>T અથવા ટેરાબાઇટોનો <nn>TB નંબર\n"
-#~ " <nn>P અથવા પેટાબાઇટોનો <nn>PB નંબર\n"
-#~ " <nn>E અથવા એક્ઝાબાઇટોનો <nn>EB નંબર\n"
-#~ " <nn>sects 512 બાઇટ સેક્ટરોનો નંબર\n"
-
-#~ msgid ""
-#~ "time - measure time taken to run command\n"
-#~ " time <command> [<args> ...]\n"
-#~ "\n"
-#~ " This runs <command> as usual, and prints the elapsed\n"
-#~ " time afterwards.\n"
-#~ msgstr ""
-#~ "time - આદેશને ચલાવવા માટે લીધેલ સમયનું માપન કરો\n"
-#~ " time <command> [<args> ...]\n"
-#~ "\n"
-#~ " આ સામાન્ય રીતે <command> ને ચલાવે છે, અને પછીથી પસાર થયેલ સમયને છાપે છે.\n"
-
-#~ msgid "external command failed: %s"
-#~ msgstr "બહારનો આદેશ નિષ્ફળ: %s"
-
-#~ msgid "test if file exists"
-#~ msgstr "ચકાસો જો ફાઇલ અસ્તિત્વ ધરાવે છે"
-
-#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
-#~ msgstr "%s અથવા LIBGUESTFS_PATH પર %s ને શોધી શકાતુ નથી (હાલનો પાથ = %s)"
-
-#~ msgid "failed to connect to vmchannel socket"
-#~ msgstr "vmchannel સોકેટ ને જોડવાનું નિષ્ફળ"
-
-#, fuzzy
-#~ msgid ""
-#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
-#~ "selinux\n"
-#~ msgstr ""
-#~ "%s: -a, -m, --listen, --remote અથવા --selinux સાથે -i વિકલ્પને વાપરી શકાતુ "
-#~ "નથી\n"
-
-#, fuzzy
-#~ msgid "cpio command failed: {error}"
-#~ msgstr "આદેશ નિષ્ફળ: %s"
-
-#~ msgid ""
-#~ "alloc - allocate an image\n"
-#~ " alloc <filename> <size>\n"
-#~ "\n"
-#~ " This creates an empty (zeroed) file of the given size,\n"
-#~ " and then adds so it can be further examined.\n"
-#~ "\n"
-#~ " For more advanced image creation, see qemu-img utility.\n"
-#~ "\n"
-#~ " Size can be specified (where <nn> means a number):\n"
-#~ " <nn> number of kilobytes\n"
-#~ " eg: 1440 standard 3.5\" floppy\n"
-#~ " <nn>K or <nn>KB number of kilobytes\n"
-#~ " <nn>M or <nn>MB number of megabytes\n"
-#~ " <nn>G or <nn>GB number of gigabytes\n"
-#~ " <nn>T or <nn>TB number of terabytes\n"
-#~ " <nn>P or <nn>PB number of petabytes\n"
-#~ " <nn>E or <nn>EB number of exabytes\n"
-#~ " <nn>sects number of 512 byte sectors\n"
-#~ msgstr ""
-#~ "alloc - ઇમેજને ફાળવો\n"
-#~ " alloc <filename> <size>\n"
-#~ "\n"
-#~ " આ આપેલ માપની ખાસી (શૂન્ય થયેલ) ફાઇલને બનાવે છે,\n"
-#~ " અને પછી ઉમેરે છે તેથી તેનું આગળ નિરીક્ષણ થઇ શકે.\n"
-#~ "\n"
-#~ " ઇમેજ બનાવવાનું વધારે ઉન્નત કરવા માટે, qemu-img ઉપયોગિતાને જુઓ.\n"
-#~ "\n"
-#~ " માપને સ્પષ્ટ કરી શકાય છે (જ્યાં <nn> નો મતલબ નંબર છે):\n"
-#~ " <nn> કિલોબાઇટનો નંબર\n"
-#~ " દાત: 1440 મૂળભૂત 3.5\" ફ્લોપી\n"
-#~ " <nn>K અથવા કિલોબાઇટનો <nn>KB નંબર\n"
-#~ " <nn>M અથવા મેગાબાઇટોનો <nn>MB નંબર\n"
-#~ " <nn>G અથવા ગીગાબાઇટોનો <nn>GB નંબર\n"
-#~ " <nn>T અથવા ટેરાબાઇટોનો <nn>TB નંબર\n"
-#~ " <nn>P અથવા પેટાબાઇટોનો <nn>PB નંબર\n"
-#~ " <nn>E અથવા એક્ઝાબાઇટોનો <nn>EB નંબર\n"
-#~ " <nn>sects 512 બાઇટ સેક્ટરોનો નંબર\n"
-
-#~ msgid "%s: virt-inspector command too long for fixed-size buffer\n"
-#~ msgstr "%s: virt-inspector આદેશ એ સ્થિર-માપનાં બફર માટે ઘણો લાંબો છે\n"