+#, fuzzy
+#~ msgid " Mountpoints:\n"
+#~ msgstr "માઉન્ટબિંદુઓને બતાવો"
+
+#, fuzzy
+#~ msgid " Filesystems:\n"
+#~ msgstr "ફાઇલસિસ્ટમને બનાવો"
+
+#~ msgid "allocate an image"
+#~ msgstr "ઇમેજને ફાળવો"
+
+#~ msgid "edit a file in the image"
+#~ msgstr "ઇમેજામં ફાઇલને સુધારો"
+
+#~ msgid "view a file in the pager"
+#~ msgstr "પેજરમાં ફાઇલને દેખાડો"
+
+#~ msgid ""
+#~ "echo - display a line of text\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " This echos the parameters to the terminal.\n"
+#~ msgstr ""
+#~ "echo - લખાણનાં વાક્યને દર્શાવો\n"
+#~ " echo [<params> ...]\n"
+#~ "\n"
+#~ " આ ટર્મિનલમાં પરિમાણોને ઇકો કરે છે.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "edit - edit a file in the image\n"
+#~ " edit <filename>\n"
+#~ "\n"
+#~ " This is used to edit a file.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\", editing locally, and then \"write\".\n"
+#~ "\n"
+#~ " Normally it uses $EDITOR, but if you use the aliases\n"
+#~ " \"vi\" or \"emacs\" you will get those editors.\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "edit - ઇમેજમાં ફાઇલને સુધારો\n"
+#~ " <filename> નો ફેરફાર કરો\n"
+#~ "\n"
+#~ " ફાઇલને સુધારવા માટે વાપરેલ છે.\n"
+#~ "\n"
+#~ " તે \"cat\" ને ચલાવવા, સ્થાનિય રીતે સુધારવા, અને \"write-file\"(દ્દારા "
+#~ "અમલીકરણ થયેલ છે) નાં જેવુ જ છે.\n"
+#~ "\n"
+#~ " સામાન્ય રીતે તે $EDITOR વાપરે છે, પરંતુ જો તમે ઉપનામોને વાપરો તો\n"
+#~ " \"vi\" અથવા \"emacs\" તમે તે સંપાદકોને મેળવશો.\n"
+#~ "\n"
+#~ " નોંધ: આ \\0 bytes ને સમાવતી વિશાળ ફાઇલો (> 2 MB) અથવા બાઇનરી ફાઇલો માટે "
+#~ "ભરોસાપાત્ર કામ કરતુ નથી.\n"
+
+#~ msgid ""
+#~ "lcd - local change directory\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " Change guestfish's current directory. This command is\n"
+#~ " useful if you want to download files to a particular\n"
+#~ " place.\n"
+#~ msgstr ""
+#~ "lcd - સ્થાનિય બદલાતી ડિરેક્ટરી\n"
+#~ " lcd <directory>\n"
+#~ "\n"
+#~ " guestfish ની હાલની ડિરેક્ટરીને બનાવો. આ આદેશ એ ઉપયોગી છે જો તમે ચોક્કસ "
+#~ "સ્થાનેથી ફાઇલોને ડાઉનલોડ કરવા માંગો તો.\n"
+
+#~ msgid ""
+#~ "glob - expand wildcards in command\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob runs <command> with wildcards expanded in any\n"
+#~ " command args. Note that the command is run repeatedly\n"
+#~ " once for each expanded argument.\n"
+#~ msgstr ""
+#~ "glob - આદેશમાં વાઇલ્ડકાર્ડોને વિસ્તારો\n"
+#~ " glob <command> [<args> ...]\n"
+#~ "\n"
+#~ " Glob એ કોઇપણ આદેશ દલીલોમાં વિસ્તરેલ વાઇલ્ડકાર્ડો સાછે <command> ને ચલાવે છે.\n"
+#~ " નોંધો કે આ દેશ એ દરેક વિસ્તરેલ દલીલ માટે એકવાર વારંવાર ચાલે છે.\n"
+
+#~ msgid ""
+#~ "more - view a file in the pager\n"
+#~ " more <filename>\n"
+#~ "\n"
+#~ " This is used to view a file in the pager.\n"
+#~ "\n"
+#~ " It is the equivalent of (and is implemented by)\n"
+#~ " running \"cat\" and using the pager.\n"
+#~ "\n"
+#~ " Normally it uses $PAGER, but if you use the alias\n"
+#~ " \"less\" then it always uses \"less\".\n"
+#~ "\n"
+#~ " NOTE: This will not work reliably for large files\n"
+#~ " (> 2 MB) or binary files containing \\0 bytes.\n"
+#~ msgstr ""
+#~ "more - પેજરમાં ફાઇલને જુઓ\n"
+#~ " વધારે <filename>\n"
+#~ "\n"
+#~ " આ પેજરમાં ફાઇલને જોવા માટે વાપરેલ છે.\n"
+#~ "\n"
+#~ " તે \"cat\" ને ચલાવવાનાં (અને તેના દ્દારા અમલીકરણ થયેલ છે) જેવુ જ છે અને પેજરને "
+#~ "વાપરી રહ્યા છે.\n"
+#~ "\n"
+#~ " સામાન્ય રીતે તે $PAGER ને વાપરે છે, પરંતુ જો તમે ઉપનામને \"less\" વાપરેલ હોય તો "
+#~ "પછી તે હંમેશા \"less\" ને વાપરે છે.\n"
+#~ "\n"
+#~ " નોંધ: આ \\0 બાઇટો ને સમાવતી મોટી ફાઇલો (> 2 MB) અથવા બાઇનરી ફાઇલો માટે ે "
+#~ "કામ કરશે નહtes.\n"
+
+#~ msgid ""
+#~ "reopen - close and reopen the libguestfs handle\n"
+#~ " reopen\n"
+#~ "\n"
+#~ "Close and reopen the libguestfs handle. It is not necessary to use\n"
+#~ "this normally, because the handle is closed properly when guestfish\n"
+#~ "exits. However this is occasionally useful for testing.\n"
+#~ msgstr ""
+#~ "reopen - libguestfs હેન્ડલને પુન:ખોલો અને બંધ કરો\n"
+#~ " પુન:ખોલો\n"
+#~ "\n"
+#~ "libguestfs હેન્ડલને પુન:ખોલો અને બંધ કરો. આ સામાન્ય રીતે વાપરવા માટે તે જરૂરી નથી, "
+#~ "કારણ કે હેન્ડલ એ બરાબર રીતે બંધ થયેલ છે જ્યારે guestfish એ બહાર નીકળે છે ત્યારે. "
+#~ "છતાંપણ આ ચકાસણી માટે અવારનવાર ઉપયોગી છે.\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "sparse - allocate a sparse image file\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " This creates an empty sparse file of the given size,\n"
+#~ " and then adds so it can be further examined.\n"
+#~ "\n"
+#~ " In all respects it works the same as the 'alloc'\n"
+#~ " command, except that the image file is allocated\n"
+#~ " sparsely, which means that disk blocks are not assigned\n"
+#~ " to the file until they are needed. Sparse disk files\n"
+#~ " only use space when written to, but they are slower\n"
+#~ " and there is a danger you could run out of real disk\n"
+#~ " space during a write operation.\n"
+#~ "\n"
+#~ " For more advanced image creation, see qemu-img utility.\n"
+#~ "\n"
+#~ " Size can be specified using standard suffixes, eg. '1M'.\n"
+#~ msgstr ""
+#~ "sparse - sparse ઇમેજ ફાઇલને ફાળવો\n"
+#~ " sparse <filename> <size>\n"
+#~ "\n"
+#~ " આ આપેલ માપની ખાલી sparse ફાઇલને બનાવે છે,\n"
+#~ " અને પછી ઉમેરે છે તેથી તેનું આગળ નિરીક્ષણ કરી શકાય.\n"
+#~ "\n"
+#~ " બધાને માન રાખીને તે 'alloc' આદેશનાં જેવુ કામ કરે છે, આને બાદ કરતા જે ઇમેજ ફાઇલ ને "
+#~ "છૂટુછવાયેલ ફાળવેલ છે, એનો મતલબ એ કે ડિસ્ક બ્લોકો એ ફાઇલમાં\n"
+#~ " સોંપેલ નથી જ્યાં સુધી તેઓને જરૂર ન હોય.\n"
+#~ " Sparse ડિસ્ક ફાઇલો એ જગ્યાને વાપરે છે જ્યારે તેમાં લખાયેલ હોય, પરંતુ તેઓ ધીમાં છે\n"
+#~ " ત્યાં ખતરનાક છે જો તમે લખવાની ક્રિયા દરમ્યાન રીઅલ ડિસ્ક જગ્યાની બહાર ચલાવી "
+#~ "શકો તો.\n"
+#~ "\n"
+#~ " વધારે ઉન્નત ઇમેજ બનાવવા માટે, qemu-img ઉપયોગિતાને જુઓ.\n"
+#~ "\n"
+#~ " માપને સ્પષ્ટ કરી શકાય છે (જ્યાં <nn> નો મતલબ નંબર હોય):\n"
+#~ " <nn> કિલોબાઇટનો નંબર\n"
+#~ " દાત: 1440 મૂળભૂત 3.5\" ફ્લોપી\n"
+#~ " <nn>K અથવા કિલોબાઇટનો <nn>KB નંબર\n"
+#~ " <nn>M અથવા મેગાબાઇટોનો <nn>MB નંબર\n"
+#~ " <nn>G અથવા ગીગાબાઇટોનો <nn>GB નંબર\n"
+#~ " <nn>T અથવા ટેરાબાઇટોનો <nn>TB નંબર\n"
+#~ " <nn>P અથવા પેટાબાઇટોનો <nn>PB નંબર\n"
+#~ " <nn>E અથવા એક્ઝાબાઇટોનો <nn>EB નંબર\n"
+#~ " <nn>sects 512 બાઇટ સેક્ટરોનો નંબર\n"
+
+#~ msgid ""
+#~ "time - measure time taken to run command\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " This runs <command> as usual, and prints the elapsed\n"
+#~ " time afterwards.\n"
+#~ msgstr ""
+#~ "time - આદેશને ચલાવવા માટે લીધેલ સમયનું માપન કરો\n"
+#~ " time <command> [<args> ...]\n"
+#~ "\n"
+#~ " આ સામાન્ય રીતે <command> ને ચલાવે છે, અને પછીથી પસાર થયેલ સમયને છાપે છે.\n"
+
+#~ msgid "external command failed: %s"
+#~ msgstr "બહારનો આદેશ નિષ્ફળ: %s"
+
+#~ msgid "test if file exists"
+#~ msgstr "ચકાસો જો ફાઇલ અસ્તિત્વ ધરાવે છે"
+
+#~ msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
+#~ msgstr "%s અથવા LIBGUESTFS_PATH પર %s ને શોધી શકાતુ નથી (હાલનો પાથ = %s)"
+
+#~ msgid "failed to connect to vmchannel socket"
+#~ msgstr "vmchannel સોકેટ ને જોડવાનું નિષ્ફળ"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: cannot use -i option with -a, -m, -N, --listen, --remote or --"
+#~ "selinux\n"
+#~ msgstr ""
+#~ "%s: -a, -m, --listen, --remote અથવા --selinux સાથે -i વિકલ્પને વાપરી શકાતુ "
+#~ "નથી\n"
+
+#, fuzzy
+#~ msgid "cpio command failed: {error}"
+#~ msgstr "આદેશ નિષ્ફળ: %s"