#!/usr/bin/perl -w
# virt-edit
-# Copyright (C) 2009-2010 Red Hat Inc.
+# Copyright (C) 2009-2011 Red Hat Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
use strict;
use Sys::Guestfs;
-use Sys::Guestfs::Lib qw(open_guest get_partitions resolve_windows_path
- inspect_all_partitions inspect_partition
- inspect_operating_systems mount_operating_system);
+use Sys::Guestfs::Lib qw(open_guest);
use Pod::Usage;
use Getopt::Long;
use File::Temp qw/tempfile/;
+use File::Basename;
use Locale::TextDomain 'libguestfs';
=encoding utf8
C<virt-edit> is a command line tool to edit C<file> where C<file>
exists in the named virtual machine (or disk image).
-If you want to just view a file, use L<virt-cat(1)>. For more complex
-cases you should look at the L<guestfish(1)> tool.
+If you want to just view a file, use L<virt-cat(1)>.
+
+For more complex cases you should look at the L<guestfish(1)> tool
+(see L</USING GUESTFISH> below).
+
+C<virt-edit> cannot be used to create a new file, nor to edit
+multiple files. L<guestfish(1)> can do that and much more.
=head1 EXAMPLES
virt-edit mydomain /etc/passwd
+For Windows guests, some Windows paths are understood:
+
+ virt-edit mywindomain 'c:\autoexec.bat'
+
You can also edit files non-interactively (see
L</NON-INTERACTIVE EDITING> below).
To change the init default level to 5:
=cut
+my $backup;
+
+=item B<--backup extension> | B<-b extension>
+
+Create a backup of the original file I<in the guest disk image>.
+The backup has the original filename with C<extension> added.
+
+Usually the first character of C<extension> would be a dot C<.>
+so you would write:
+
+ virt-edit -b .orig [etc]
+
+By default, no backup file is made.
+
+=cut
+
my $uri;
=item B<--connect URI> | B<-c URI>
=cut
+my $format;
+
+=item B<--format> raw
+
+Specify the format of disk images given on the command line. If this
+is omitted then the format is autodetected from the content of the
+disk image.
+
+If disk images are requested from libvirt, then this program asks
+libvirt for this information. In this case, the value of the format
+parameter is ignored.
+
+If working with untrusted raw-format guest disk images, you should
+ensure the format is always specified.
+
+=cut
+
my $expr;
=item B<--expr EXPR> | B<-e EXPR>
GetOptions ("help|?" => \$help,
"version" => \$version,
"connect|c=s" => \$uri,
+ "format=s" => \$format,
"expr|e=s" => \$expr,
+ "backup|b=s" => \$backup,
) or pod2usage (2);
pod2usage (1) if $help;
if ($version) {
my $g;
if ($uri) {
- $g = open_guest (\@ARGV, address => $uri, rw => 1);
+ $g = open_guest (\@ARGV, address => $uri, rw => 1, format => $format);
} else {
- $g = open_guest (\@ARGV, rw => 1);
+ $g = open_guest (\@ARGV, rw => 1, format => $format);
}
$g->launch ();
-# List of possible filesystems.
-my @partitions = get_partitions ($g);
-
-# Now query each one to build up a picture of what's in it.
-my %fses =
- inspect_all_partitions ($g, \@partitions,
- use_windows_registry => 0);
-
-my $oses = inspect_operating_systems ($g, \%fses);
-
-my @roots = keys %$oses;
-die __"multiboot operating systems are not supported by virt-edit" if @roots > 1;
-my $root_dev = $roots[0];
+my @roots = $g->inspect_os ();
+if (@roots == 0) {
+ die __x("{prog}: No operating system could be detected inside this disk image.\n\nThis may be because the file is not a disk image, or is not a virtual machine\nimage, or because the OS type is not understood by libguestfs.\n\nIf you feel this is an error, please file a bug report including as much\ninformation about the disk image as possible.\n",
+ prog => basename ($0));
+}
+if (@roots > 1) {
+ die __x("{prog}: multiboot operating systems are not supported.\n",
+ prog => basename ($0))
+}
+my $root = $roots[0];
+my %fses = $g->inspect_get_mountpoints ($root);
+my @fses = sort { length $a <=> length $b } keys %fses;
+foreach (@fses) {
+ $g->mount_options ("", $fses{$_}, $_);
+}
-my $os = $oses->{$root_dev};
-mount_operating_system ($g, $os, 0);
+# Special handling for Windows filenames.
+$filename = windows_path ($g, $root, $filename)
+ if $g->inspect_get_type ($root) eq "windows";
-my ($fh_not_used, $tempname) = tempfile ();
+my ($fh, $tempname) = tempfile (UNLINK => 1);
+my $fddev = "/dev/fd/" . fileno ($fh);
# Allow this to fail in case eg. the file does not exist.
-$g->download($filename, $tempname);
+$g->download ($filename, $fddev);
+
+close $fh or die "close: $!";
my $do_upload = $tempname;
print __"File not changed.\n";
}
} else {
- my ($fh, $tempout) = tempfile ();
+ my ($fh, $tempout) = tempfile (UNLINK => 1);
# Apply a Perl expression to the lines of the file.
open IFILE, $tempname or die "$tempname: $!";
die if $@;
print $fh $_ or die "print: $!";
}
- close $fh;
+ close $fh or die "close: $!";
$do_upload = $tempout;
}
if (defined $do_upload) {
- $g->upload ($do_upload, $filename);
+ # Upload to a new file, so if it fails we don't end up with
+ # a partially written file. Give the new file a completely
+ # random name so we have only a tiny chance of overwriting
+ # some existing file.
+ my $dirname = $filename;
+ $dirname =~ s{/[^/]+$}{/};
+
+ my @chars = ('a'..'z', 'A'..'Z', '0'..'9');
+ my $newname = $dirname;
+ foreach (0..7) {
+ $newname .= $chars[rand @chars];
+ }
+
+ $g->upload ($do_upload, $newname);
+
+ # Backup or overwrite?
+ $g->mv ($filename, "$filename$backup") if defined $backup;
+ $g->mv ($newname, $filename);
+
$g->umount_all ();
$g->sync ();
}
undef $g;
-exit 0;
-
=head1 NON-INTERACTIVE EDITING
C<virt-edit> normally calls out to C<$EDITOR> (or vi) so
program you want to run. The script is invoked as C<$EDITOR tmpfile>
and it should update C<tmpfile> in place however it likes.
-The second method is to use the C<-e> parameter of C<virt-edit> to run
+The second method is to use the I<-e> parameter of C<virt-edit> to run
a short Perl snippet in the style of L<sed(1)>. For example to
replace all instances of C<foo> with C<bar> in a file:
my $m = $_; chomp $m; $m =~ /some text$/
+=head1 WINDOWS PATHS
+
+C<virt-edit> has a limited ability to understand Windows drive letters
+and paths (eg. C<E:\foo\bar.txt>).
+
+If and only if the guest is running Windows then:
+
+=over 4
+
+=item *
+
+Drive letter prefixes like C<C:> are resolved against the
+Windows Registry to the correct filesystem.
+
+=item *
+
+Any backslash (C<\>) characters in the path are replaced
+with forward slashes so that libguestfs can process it.
+
+=item *
+
+The path is resolved case insensitively to locate the file
+that should be edited.
+
+=back
+
+There are some known shortcomings:
+
+=over 4
+
+=item *
+
+Some NTFS symbolic links may not be followed correctly.
+
+=item *
+
+NTFS junction points that cross filesystems are not followed.
+
+=back
+
+=cut
+
+sub windows_path
+{
+ my $g = shift;
+ my $root = shift;
+ my $filename = shift;
+
+ # Deal with drive letters.
+ if ($filename =~ /^([a-z]):(.*)/i) {
+ $filename = $2;
+ my $drive_letter = $1;
+
+ # Look up the drive letter in the drive mapping table. We
+ # have to do a case insensitive comparison, the slow way.
+ my $device;
+ my %drives = $g->inspect_get_drive_mappings ($root);
+ foreach (keys %drives) {
+ if (lc $_ eq lc $drive_letter) {
+ $device = $drives{$_};
+ last;
+ }
+ }
+
+ die __x("virt-edit: drive '{x}:' not found\n", x => $drive_letter)
+ unless defined $device;
+
+ # Unmount current disk and remount $device.
+ $g->umount_all ();
+ $g->mount_options ("", $device, "/");
+ }
+
+ # Replace any backslashes in the rest of the path with
+ # forward slashes.
+ $filename =~ s{\\}{/}g;
+
+ # If the user put \foo on the command line without quoting it
+ # properly, then we'll see that here as a bare path. Add a more
+ # descriptive error message here.
+ if (substr ($filename, 0, 1) ne "/") {
+ die __x("virt-edit: '{f}' does not start with a / or \\ character.
+If you are using Windows style paths with backslashes like C:\\foo.txt
+then don't forget that you must quote them with single quotes to
+prevent the shell from munging the backslashes.\n",
+ f => $filename)
+ }
+
+ # Case sensitivity.
+ $filename = $g->case_sensitive_path ($filename);
+
+ return $filename;
+}
+
+=head1 USING GUESTFISH
+
+L<guestfish(1)> is a more powerful, lower level tool which you can use
+when C<virt-edit> doesn't work.
+
+Using C<virt-edit> is approximately equivalent to doing:
+
+ guestfish --rw -i -d domname edit /file
+
+where C<domname> is the name of the libvirt guest, and C</file> is the
+full path to the file.
+
+The command above uses libguestfs's guest inspection feature and so
+does not work on guests that libguestfs cannot inspect, or on things
+like arbitrary disk images that don't contain guests. To edit a file
+on a disk image directly, use:
+
+ guestfish --rw -a disk.img -m /dev/sda1 edit /file
+
+where C<disk.img> is the disk image, C</dev/sda1> is the filesystem
+within the disk image to edit, and C</file> is the full path to the
+file.
+
+C<virt-edit> cannot create new files. Use the guestfish commands
+C<touch>, C<write> or C<upload> instead:
+
+ guestfish --rw -i -d domname touch /newfile
+
+ guestfish --rw -i -d domname write /newfile "new content"
+
+ guestfish --rw -i -d domname upload localfile /newfile
+
+C<virt-edit> cannot edit multiple files, but guestfish can
+do it like this:
+
+ guestfish --rw -i -d domname edit /file1 : edit /file2
+
+=cut
+
+exit 0;
+
=head1 ENVIRONMENT VARIABLES
=over 4
=back
+=head1 SHELL QUOTING
+
+Libvirt guest names can contain arbitrary characters, some of which
+have meaning to the shell such as C<#> and space. You may need to
+quote or escape these characters on the command line. See the shell
+manual page L<sh(1)> for details.
+
=head1 SEE ALSO
L<guestfs(3)>,
L<guestfish(1)>,
L<virt-cat(1)>,
+L<virt-copy-in(1)>,
+L<virt-tar-in(1)>,
L<Sys::Guestfs(3)>,
L<Sys::Guestfs::Lib(3)>,
L<Sys::Virt(3)>,
=head1 COPYRIGHT
-Copyright (C) 2009-2010 Red Hat Inc.
+Copyright (C) 2009-2011 Red Hat Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by