"Project-Id-Version: libguestfs\n"
"Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?"
"component=libguestfs&product=Virtualization+Tools\n"
-"POT-Creation-Date: 2010-08-24 13:09+0100\n"
+"POT-Creation-Date: 2010-09-04 10:26+0100\n"
"PO-Revision-Date: 2010-02-02 13:45+0530\n"
"Last-Translator: Sweta Kothari <swkothar@redhat.com>\n"
"Language-Team: Gujarati\n"
msgid "use '%s filename' to edit a file\n"
msgstr "ફાઇલને સુધારવા માટે '%s filename' ને વાપરો\n"
-#: fish/fish.c:103 fuse/guestmount.c:879
+#: fish/fish.c:111 fuse/guestmount.c:880
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "વધારે જાણકારી માટે `%s --help' નો પ્રયત્ન કરો.\n"
-#: fish/fish.c:107
+#: fish/fish.c:115
#, fuzzy, c-format
msgid ""
"%s: guest filesystem shell\n"
" -m|--mount dev[:mnt] Mount dev on mnt (if omitted, /)\n"
" -n|--no-sync Don't autosync\n"
" -N|--new type Create prepared disk (test1.img, ...)\n"
+" --progress-bars Enable progress bars even when not interactive\n"
+" --no-progress-bars Disable progress bars\n"
" --remote[=pid] Send commands to remote %s\n"
" -r|--ro Mount read-only\n"
" --selinux Enable SELinux support\n"
" -V|--version આવૃત્તિને દર્શાવો અને બહાર નીકળો\n"
"વધારે જાણકારી માટે, મુખ્યપાનું %s(1) ને જુઓ.\n"
-#: fish/fish.c:207 fuse/guestmount.c:976
+#: fish/fish.c:221 fuse/guestmount.c:977
#, c-format
msgid "guestfs_create: failed to create handle\n"
msgstr "guestfs_create: હેન્ડલ ને બનાવવાનું નિષ્ફળ\n"
-#: fish/fish.c:246
+#: fish/fish.c:260
#, c-format
msgid "%s: --listen=PID: PID was not a number: %s\n"
msgstr "%s: --listen=PID: PID એ નંબર ન હતો: %s\n"
-#: fish/fish.c:253
+#: fish/fish.c:267
#, c-format
msgid ""
"%s: remote: $GUESTFISH_PID must be set to the PID of the remote process\n"
msgstr "%s: દૂરસ્થ: $GUESTFISH_PID એ દૂરસ્થ પ્રક્રિયાનાં PID ને સુયોજિત કરવુ જ પડશે\n"
-#: fish/fish.c:264 fuse/guestmount.c:1021
+#: fish/fish.c:282 fuse/guestmount.c:1022
#, c-format
msgid "%s: unknown long option: %s (%d)\n"
msgstr "%s: અજ્ઞાત લાંબો વિકલ્પ: %s (%d)\n"
-#: fish/fish.c:330
+#: fish/fish.c:348
#, c-format
msgid "%s: only one -f parameter can be given\n"
msgstr "%s: ફક્ત એક -f પરિમાણને આપી શકાય છે\n"
-#: fish/fish.c:463
+#: fish/fish.c:484
#, c-format
msgid "%s: cannot use --listen and --remote options at the same time\n"
msgstr "%s: સરખા સમયે --listen અને --remote વિકલ્પોને વાપરી શકાતા નથી\n"
-#: fish/fish.c:471
+#: fish/fish.c:492
#, c-format
msgid "%s: extra parameters on the command line with --listen flag\n"
msgstr "%s: --listen ફ્લેગ સાથે આદેશ વાક્ય પર વધારાનાં પરિમાણો\n"
-#: fish/fish.c:477
+#: fish/fish.c:498
#, c-format
msgid "%s: cannot use --listen and --file options at the same time\n"
msgstr "%s: સરખા સમયે --listen અને --file વિકલ્પોને વાપરી શકાતુ નથી\n"
-#: fish/fish.c:553
+#: fish/fish.c:555
+#, c-format
+msgid "guestfish: could not access termcap or terminfo database.\n"
+msgstr ""
+
+#: fish/fish.c:559
+#, c-format
+msgid "guestfish: terminal type \"%s\" not defined.\n"
+msgstr ""
+
+#: fish/fish.c:612
#, fuzzy, c-format
msgid "guestfish: too many drives added on the command line\n"
msgstr "%s: આદેશ વાક્ય પર ખાલી આદેશ\n"
-#: fish/fish.c:685
+#: fish/fish.c:744
#, fuzzy, c-format
msgid ""
"\n"
" શેલને બહાર નીકળવા માટે 'quit'\n"
"\n"
-#: fish/fish.c:772
+#: fish/fish.c:831
#, c-format
msgid "%s: unterminated double quote\n"
msgstr "%s: અંત ન બમણા અવતરણચિહ્નો \n"
-#: fish/fish.c:778 fish/fish.c:795
+#: fish/fish.c:837 fish/fish.c:854
#, c-format
msgid "%s: command arguments not separated by whitespace\n"
msgstr "%s: આદેશ દલીલો એ ખાલી જગ્યા દ્દારા અલગ થયેલ નથી\n"
-#: fish/fish.c:789
+#: fish/fish.c:848
#, c-format
msgid "%s: unterminated single quote\n"
msgstr "%s: અંત ન આવેલ એક અવતરણ ચિહ્ન\n"
-#: fish/fish.c:844
+#: fish/fish.c:903
#, c-format
msgid "%s: internal error parsing string at '%s'\n"
msgstr "%s: આંતરિક ભૂલ '%s' પર શબ્દમાળાનું પદચ્છેદન કરી રહી છે\n"
-#: fish/fish.c:861
+#: fish/fish.c:920
#, c-format
msgid "%s: too many arguments\n"
msgstr "%s: ઘણીબધી દલીલો છે\n"
-#: fish/fish.c:890
+#: fish/fish.c:949
#, c-format
msgid "%s: empty command on command line\n"
msgstr "%s: આદેશ વાક્ય પર ખાલી આદેશ\n"
-#: fish/fish.c:1056
+#: fish/fish.c:1117
msgid "display a list of commands or help on a command"
msgstr "આદેશોની યાદીને દર્શાવો અથવા આદેશ પર મદદ "
-#: fish/fish.c:1058
+#: fish/fish.c:1119
msgid "read the manual"
msgstr ""
-#: fish/fish.c:1060
+#: fish/fish.c:1121
msgid "quit guestfish"
msgstr "guestfish માંથી બહાર નીકળો"
-#: fish/fish.c:1063
+#: fish/fish.c:1124
msgid "allocate an image"
msgstr "ઇમેજને ફાળવો"
-#: fish/fish.c:1065
+#: fish/fish.c:1126
msgid "display a line of text"
msgstr "લખાણનાં વાક્યને દર્શાવો"
-#: fish/fish.c:1067
+#: fish/fish.c:1128
msgid "edit a file in the image"
msgstr "ઇમેજામં ફાઇલને સુધારો"
-#: fish/fish.c:1069
+#: fish/fish.c:1130
msgid "local change directory"
msgstr "સ્થાનિય બદલાતી ડિરેક્ટરી"
-#: fish/fish.c:1071
+#: fish/fish.c:1132
msgid "expand wildcards in command"
msgstr "આદેશમાં વાઇલ્ડકાર્ડોને વિસ્તારો"
-#: fish/fish.c:1073
+#: fish/fish.c:1134
msgid "view a file in the pager"
msgstr "પેજરમાં ફાઇલને દેખાડો"
-#: fish/fish.c:1075
+#: fish/fish.c:1136
msgid "close and reopen libguestfs handle"
msgstr "libguestfs હેન્ડલને બંધ કરો અને પુન:ખોલો"
-#: fish/fish.c:1077
+#: fish/fish.c:1138
msgid "allocate a sparse image file"
msgstr "છૂટીછવાયેલ ઇમેજ ફાઇલને ફાળવો"
-#: fish/fish.c:1079
+#: fish/fish.c:1140
#, fuzzy
msgid "list supported groups of commands"
msgstr "આદેશોને સ્વીકારવા માટે તૈયાર છે"
-#: fish/fish.c:1081
+#: fish/fish.c:1142
msgid "measure time taken to run command"
msgstr "આદેશને ચલાવવા માટે લીધેલ સમયને માપો"
-#: fish/fish.c:1093
+#: fish/fish.c:1154
#, c-format
msgid ""
"alloc - allocate an image\n"
" Size can be specified using standard suffixes, eg. '1M'.\n"
msgstr ""
-#: fish/fish.c:1106
+#: fish/fish.c:1167
#, c-format
msgid ""
"echo - display a line of text\n"
"\n"
" આ ટર્મિનલમાં પરિમાણોને ઇકો કરે છે.\n"
-#: fish/fish.c:1115
+#: fish/fish.c:1176
#, fuzzy, c-format
msgid ""
"edit - edit a file in the image\n"
" નોંધ: આ \\0 bytes ને સમાવતી વિશાળ ફાઇલો (> 2 MB) અથવા બાઇનરી ફાઇલો માટે "
"ભરોસાપાત્ર કામ કરતુ નથી.\n"
-#: fish/fish.c:1131
+#: fish/fish.c:1192
#, c-format
msgid ""
"lcd - local change directory\n"
" guestfish ની હાલની ડિરેક્ટરીને બનાવો. આ આદેશ એ ઉપયોગી છે જો તમે ચોક્કસ સ્થાનેથી "
"ફાઇલોને ડાઉનલોડ કરવા માંગો તો.\n"
-#: fish/fish.c:1140
+#: fish/fish.c:1201
#, c-format
msgid ""
"glob - expand wildcards in command\n"
" Glob એ કોઇપણ આદેશ દલીલોમાં વિસ્તરેલ વાઇલ્ડકાર્ડો સાછે <command> ને ચલાવે છે.\n"
" નોંધો કે આ દેશ એ દરેક વિસ્તરેલ દલીલ માટે એકવાર વારંવાર ચાલે છે.\n"
-#: fish/fish.c:1150
+#: fish/fish.c:1211
#, c-format
msgid ""
"man - read the manual\n"
" Opens the manual page for guestfish.\n"
msgstr ""
-#: fish/fish.c:1157
+#: fish/fish.c:1218
#, c-format
msgid ""
"help - display a list of commands or help on a command\n"
" help cmd\n"
" મદદ\n"
-#: fish/fish.c:1164
+#: fish/fish.c:1225
#, c-format
msgid ""
"more - view a file in the pager\n"
" નોંધ: આ \\0 બાઇટો ને સમાવતી મોટી ફાઇલો (> 2 MB) અથવા બાઇનરી ફાઇલો માટે ે કામ "
"કરશે નહtes.\n"
-#: fish/fish.c:1182
+#: fish/fish.c:1243
#, c-format
msgid ""
"quit - quit guestfish\n"
"quit - guestfish માંથી બહાર નીકળો\n"
" બહાર નીકળો\n"
-#: fish/fish.c:1187
+#: fish/fish.c:1248
#, c-format
msgid ""
"reopen - close and reopen the libguestfs handle\n"
"કારણ કે હેન્ડલ એ બરાબર રીતે બંધ થયેલ છે જ્યારે guestfish એ બહાર નીકળે છે ત્યારે. છતાંપણ આ "
"ચકાસણી માટે અવારનવાર ઉપયોગી છે.\n"
-#: fish/fish.c:1196
+#: fish/fish.c:1257
#, fuzzy, c-format
msgid ""
"sparse - allocate a sparse image file\n"
" <nn>E અથવા એક્ઝાબાઇટોનો <nn>EB નંબર\n"
" <nn>sects 512 બાઇટ સેક્ટરોનો નંબર\n"
-#: fish/fish.c:1217
+#: fish/fish.c:1278
#, c-format
msgid ""
"supported - list supported groups of commands\n"
" See also guestfs(3) section AVAILABILITY.\n"
msgstr ""
-#: fish/fish.c:1229
+#: fish/fish.c:1290
#, c-format
msgid ""
"time - measure time taken to run command\n"
"\n"
" આ સામાન્ય રીતે <command> ને ચલાવે છે, અને પછીથી પસાર થયેલ સમયને છાપે છે.\n"
-#: fish/fish.c:1237
+#: fish/fish.c:1298
#, c-format
msgid "%s: command not known, use -h to list all commands\n"
msgstr "%s: આદેશ જાણીતો નથી, બધા આદેશોની યાદી માટે -h ને વાપરો\n"
-#: fish/fish.c:1253
+#: fish/fish.c:1314
#, c-format
msgid ""
"Did you mean to open a disk image? guestfish -a disk.img\n"
"For complete documentation: man guestfish\n"
msgstr ""
-#: fish/fish.c:1410
+#: fish/fish.c:1471
#, c-format
msgid "Runaway quote in string \"%s\"\n"
msgstr "શબ્દમાળા \"%s\" માં દૂર થતો અવતરણચિહ્ન\n"
-#: fish/fish.c:1745
+#: fish/fish.c:1806
#, c-format
msgid "Enter key or passphrase (\"%s\"): "
msgstr ""
msgid "guestfish: libvirt domain '%s' has no disks\n"
msgstr ""
-#: fuse/guestmount.c:883
+#: fuse/guestmount.c:884
#, c-format
msgid ""
"%s: FUSE module for libguestfs\n"
" -v|--verbose વર્બોસ સંદેશાઓages\n"
" -V|--version આવૃત્તિને દર્શાવોsઅને બહાર નીકળોexit\n"
-#: fuse/guestmount.c:1092
+#: fuse/guestmount.c:1096
#, c-format
msgid "%s: must have at least one -a and at least one -m option\n"
msgstr "%s: ઓછામાં ઓછુ એક -a અને -m વિકલ્પ પર હોવુ જ જોઇએ\n"
-#: fuse/guestmount.c:1100
+#: fuse/guestmount.c:1104
#, c-format
msgid "%s: you must specify a mountpoint in the host filesystem\n"
msgstr "%s: યજમાન ફાઇલસિસ્ટમમાં માઉન્ટબિંદુને સ્પષ્ટ કરવુ જ પડશે\n"
msgid "external command failed: %s"
msgstr "બહારનો આદેશ નિષ્ફળ: %s"
-#: src/guestfs.c:176
+#: src/guestfs.c:179
#, c-format
msgid "guestfs_close: called twice on the same handle\n"
msgstr "guestfs_close: એજ હેન્ડલ પર બે વાર બોલાવેલ છે\n"
-#: src/guestfs.c:279
+#: src/guestfs.c:284
#, c-format
msgid "libguestfs: error: %s\n"
msgstr "libguestfs: ભૂલ: %s\n"
msgid "%s: cannot create temporary directory"
msgstr "%s: કામચલાઉ ડિરેક્ટરીને બનાવી શકાતી નથી"
-#: src/launch.c:603
+#: src/launch.c:606
msgid "guestfs_launch failed, see earlier error messages"
msgstr "guestfs_launch નિષ્ફળ, પહેલાનાં ભૂલ સંદેશાઓને જૂઓ"
-#: src/launch.c:616
+#: src/launch.c:619
msgid "qemu launched and contacted daemon, but state != READY"
msgstr "qemu શરૂ થયેલ છે, ડિમનનો સંપર્ક થયેલ છે, પરંતુ state != READY"
-#: src/launch.c:753
+#: src/launch.c:756
#, c-format
msgid ""
"%s: command failed: If qemu is located on a non-standard path, try setting "
"%s: આદેશ નિષ્ફળ: જો qemu એ બિન-મૂળભૂત પાથ પર સ્થિત થયેલ હોય તો, LIBGUESTFS_QEMU "
"પર્યાવરણ ચલ સુયોજનોનો પ્રયત્ન કરો."
-#: src/launch.c:845
+#: src/launch.c:848
msgid "qemu has not been launched yet"
msgstr "qemu એ હજુ શરૂ કરવામાં આવ્યુ નથી"
-#: src/launch.c:856
+#: src/launch.c:859
msgid "no subprocess to kill"
msgstr "મારવા માટે ઉપપ્રક્રિયા નથી"
msgstr ""
"check_for_daemon_cancellation_or_eof: ડિમન માંથી 0x%x ને વાંચો, ઇચ્છિત 0x%x\n"
-#: src/proto.c:439 src/proto.c:493
+#: src/proto.c:453 src/proto.c:514
msgid "unexpected end of file when reading from daemon"
msgstr "ફાઇલનો અનિચ્છનીય અંત જ્યારે ડિમન માંથી વાંચી રહ્યા હોય"
-#: src/proto.c:455
+#: src/proto.c:474
#, c-format
msgid "received magic signature from guestfsd, but in state %d"
msgstr "guestfsd માંથી મળેલ જાદુઇ હસ્તાક્ષર, પરંતુ state %d માં છે"
-#: src/proto.c:470
+#: src/proto.c:491
#, c-format
msgid "message length (%u) > maximum possible size (%d)"
msgstr "સંદેશ લંબાઇ (%u) > મહત્તમ શક્ય માપ (%d)"
-#: src/proto.c:600
+#: src/proto.c:641
#, c-format
msgid "guestfs___send: state %d != BUSY"
msgstr "guestfs___send: state %d != BUSY"
-#: src/proto.c:622
+#: src/proto.c:663
msgid "xdr_guestfs_message_header failed"
msgstr "xdr_guestfs_message_header નિષ્ફળ"
-#: src/proto.c:631
+#: src/proto.c:672
msgid "dispatch failed to marshal args"
msgstr "માર્શલ દલીલોને મોકલવાનું નિષ્ફળ"
-#: src/proto.c:761
+#: src/proto.c:802
#, c-format
msgid "send_file_chunk: state %d != READY"
msgstr "send_file_chunk: state %d != READY"
-#: src/proto.c:777
+#: src/proto.c:818
#, c-format
msgid "xdr_guestfs_chunk failed (buf = %p, buflen = %zu)"
msgstr "xdr_guestfs_chunk નિષ્ફળ (buf = %p, buflen = %zu)"
-#: src/proto.c:900
+#: src/proto.c:941
#, c-format
msgid "%s: error in chunked encoding"
msgstr "%s: ટૂકડા થયેલ એનકોડીંગમાં ભૂલ"
-#: src/proto.c:928
+#: src/proto.c:969
msgid "write to daemon socket"
msgstr "ડિમન સોકેટમાં લખો"
-#: src/proto.c:951
+#: src/proto.c:992
msgid "receive_file_data: parse error in reply callback"
msgstr "receive_file_data: કોલબેક જવાબમાં પદચ્છેદન ભૂલ"
-#: src/proto.c:956
+#: src/proto.c:997
msgid "receive_file_data: unexpected flag received when reading file chunks"
msgstr "receive_file_data: મળેલ અનિચ્છનીય ફ્લેગ જ્યારે ફાઇલ ટૂકડાઓને વાંચી રહ્યા હોય"
-#: src/proto.c:964
+#: src/proto.c:1005
msgid "failed to parse file chunk"
msgstr "ફાઇલનાં ટૂકડાને પદચ્છેદન કરવાનું નિષ્ફળ"
-#: src/proto.c:973
+#: src/proto.c:1014
msgid "file receive cancelled by daemon"
msgstr "ડિમન દ્દારા રદ થયેલ ફાઇલ મેળવી"
"filesystem size correctly. Please read the BUGS section of the manpage.\n"
msgstr ""
-#: tools/virt-rescue.pl:194
+#: tools/virt-rescue.pl:195
msgid "virt-rescue: no image or VM names rescue given"
msgstr ""
msgid "virt-resize: sorry this program does not work on a 32 bit host\n"
msgstr ""
-#: tools/virt-resize.pl:526
+#: tools/virt-resize.pl:528
#, fuzzy, perl-brace-format
msgid "virt-resize: {file}: does not exist or is not readable\n"
msgstr "બાઇનરી '%s' એ અસ્તિત્વ ધરાવતુ નથી અથવા એક્સિક્યૂટેબલ નથી\n"
-#: tools/virt-resize.pl:528
+#: tools/virt-resize.pl:530
#, perl-brace-format
msgid ""
"virt-resize: {file}: does not exist or is not writable\n"
"Please read the virt-resize(1) manpage for more information.\n"
msgstr ""
-#: tools/virt-resize.pl:553 tools/virt-resize.pl:556
+#: tools/virt-resize.pl:555 tools/virt-resize.pl:558
#, perl-brace-format
msgid ""
"virt-resize: {file}: file is too small to be a disk image ({sz} bytes)\n"
msgstr ""
-#: tools/virt-resize.pl:720
+#: tools/virt-resize.pl:723
#, fuzzy, perl-brace-format
msgid "virt-resize: no logical volume called {n}\n"
msgstr "LVM લોજીકલ વોલ્યુમનું માપ બદલો"
-#: tools/virt-resize.pl:740
+#: tools/virt-resize.pl:743
#, perl-brace-format
msgid ""
"{p}: partition not found in the source disk image, when using the '{opt}' "
"command line option\n"
msgstr ""
-#: tools/virt-resize.pl:746
+#: tools/virt-resize.pl:749
#, perl-brace-format
msgid ""
"{p}: partition ignored, you cannot use it in another command line argument\n"
msgstr ""
-#: tools/virt-resize.pl:750
+#: tools/virt-resize.pl:753
#, perl-brace-format
msgid ""
"{p}: partition deleted, you cannot use it in another command line argument\n"
msgstr ""
-#: tools/virt-resize.pl:792
+#: tools/virt-resize.pl:795
#, perl-brace-format
msgid "{p}: this partition has already been marked for resizing\n"
msgstr ""
-#: tools/virt-resize.pl:800
+#: tools/virt-resize.pl:803
#, perl-brace-format
msgid "{p}: missing size field in {o} option\n"
msgstr ""
-#: tools/virt-resize.pl:817
+#: tools/virt-resize.pl:820
#, perl-brace-format
msgid "{p}: {f}: cannot parse size field\n"
msgstr ""
-#: tools/virt-resize.pl:822
+#: tools/virt-resize.pl:825
#, perl-brace-format
msgid "{p}: new size is zero or negative\n"
msgstr ""
-#: tools/virt-resize.pl:845
+#: tools/virt-resize.pl:848
#, perl-brace-format
msgid ""
"{p}: cannot make this partition smaller because it contains a\n"
"You have to resize the content first, see virt-resize(1).\n"
msgstr ""
-#: tools/virt-resize.pl:861
+#: tools/virt-resize.pl:864
msgid "virt-resize: you cannot use options --expand and --shrink together\n"
msgstr ""
-#: tools/virt-resize.pl:910
+#: tools/virt-resize.pl:913
#, perl-brace-format
msgid ""
"virt-resize: error: cannot use --expand when there is no surplus space to\n"
"expand into. You need to make the target disk larger by at least {h}.\n"
msgstr ""
-#: tools/virt-resize.pl:925
+#: tools/virt-resize.pl:928
msgid ""
"virt-resize: error: cannot use --shrink because there is no deficit\n"
"(see 'deficit' in the virt-resize(1) man page)\n"
msgstr ""
-#: tools/virt-resize.pl:940
+#: tools/virt-resize.pl:943
msgid "Summary of changes:\n"
msgstr ""
-#: tools/virt-resize.pl:944
+#: tools/virt-resize.pl:947
#, perl-brace-format
msgid "{p}: partition will be ignored\n"
msgstr ""
-#: tools/virt-resize.pl:946
+#: tools/virt-resize.pl:949
#, perl-brace-format
msgid "{p}: partition will be deleted\n"
msgstr ""
-#: tools/virt-resize.pl:948
+#: tools/virt-resize.pl:951
#, perl-brace-format
msgid "{p}: partition will be resized from {oldsize} to {newsize}\n"
msgstr ""
-#: tools/virt-resize.pl:953
+#: tools/virt-resize.pl:956
#, perl-brace-format
msgid "{p}: content will be expanded using the '{meth}' method\n"
msgstr ""
-#: tools/virt-resize.pl:958
+#: tools/virt-resize.pl:961
#, perl-brace-format
msgid "{p}: partition will be left alone\n"
msgstr ""
-#: tools/virt-resize.pl:963
+#: tools/virt-resize.pl:966
#, perl-brace-format
msgid "{n}: LV will be expanded to maximum size\n"
msgstr ""
-#: tools/virt-resize.pl:969
+#: tools/virt-resize.pl:972
#, perl-brace-format
msgid "{n}: content will be expanded using the '{meth}' method\n"
msgstr ""
-#: tools/virt-resize.pl:976
+#: tools/virt-resize.pl:979
#, perl-brace-format
msgid "There is a surplus of {spl} bytes ({h}).\n"
msgstr ""
-#: tools/virt-resize.pl:981
+#: tools/virt-resize.pl:984
msgid "An extra partition will be created for the surplus.\n"
msgstr ""
-#: tools/virt-resize.pl:983
+#: tools/virt-resize.pl:986
msgid ""
"The surplus space is not large enough for an extra partition to be created\n"
"and so it will just be ignored.\n"
msgstr ""
-#: tools/virt-resize.pl:986
+#: tools/virt-resize.pl:989
msgid ""
"The surplus space will be ignored. Run a partitioning program in the guest\n"
"to partition this extra space if you want.\n"
msgstr ""
-#: tools/virt-resize.pl:989
+#: tools/virt-resize.pl:992
#, perl-brace-format
msgid ""
"virt-resize: error: there is a deficit of {def} bytes ({h}).\n"
"or adjust your resizing requests.\n"
msgstr ""
-#: tools/virt-resize.pl:1030
+#: tools/virt-resize.pl:1033
msgid "virt-resize: source disk does not have a first partition\n"
msgstr ""
-#: tools/virt-resize.pl:1126
+#: tools/virt-resize.pl:1128
#, perl-brace-format
-msgid "Copying {p} ..."
-msgstr ""
-
-#: tools/virt-resize.pl:1133
-msgid "done"
+msgid "Copying {p} ...\n"
msgstr ""
-#: tools/virt-resize.pl:1191 tools/virt-resize.pl:1249
+#: tools/virt-resize.pl:1189 tools/virt-resize.pl:1247
#, perl-brace-format
msgid "Expanding {p} using the '{meth}' method\n"
msgstr ""