include $(top_srcdir)/subdir-rules.mk
EXTRA_DIST = \
- kmod.whitelist.in \
packagelist.in \
+ excludelist.in \
init \
- debian/modules/install_kernel \
- debian/modules/y0_install-guestfsd \
- debian/modules/z99_final-cleanups \
- debian/debirf.conf.in \
make.sh.in
-# Build the root filesystem (appliance).
-# Currently this is arch-dependent, so it seems like putting it in
-# $(libdir) is best. When we build cross-architecture filesystems we
-# should probably move them to $(datadir).
fsdir = $(libdir)/guestfs
-fs_DATA = $(APPLIANCE_FILES)
+superminfsdir = $(libdir)/guestfs/supermin.d
-# These are the resulting output files from the whole process:
-# VMLINUZ kernel for the full appliance
-# INITRAMFSIMG initramfs (ie. root fs) for the full appliance
-# For details of the supermin appliance, read the README file:
-# SUPERMINIMG initramfs (ie. partial root fs) for the supermin appliance
-# SUPERMINFILES list of missing files (the ones we will pull out of the
-# host filesystem at runtime) in the supermin appliance
-APPLIANCE_FILES = $(INITRAMFSIMG) $(VMLINUZ)
-if SUPERMIN
-APPLIANCE_FILES += $(SUPERMINIMG) $(SUPERMINFILES) kmod.whitelist
-bin_PROGRAMS = libguestfs-supermin-helper
-libguestfs_supermin_helper_SOURCES = \
- libguestfs-supermin-helper.c ../gnulib/lib/xalloc-die.c
-libguestfs_supermin_helper_CFLAGS = \
- -I$(srcdir)/../gnulib/lib -I../gnulib/lib \
- $(WARN_CFLAGS) $(WERROR_CFLAGS)
-libguestfs_supermin_helper_LDADD = \
- ../gnulib/lib/libgnu.la
-endif
-
-# Don't change these names - they must be the same as in '*.sh' scripts.
-INITRAMFSIMG = initramfs.$(REPO).$(host_cpu).img
-VMLINUZ = vmlinuz.$(REPO).$(host_cpu)
-if SUPERMIN
-SUPERMINIMG = initramfs.$(REPO).$(host_cpu).supermin.img
-SUPERMINFILES = initramfs.$(REPO).$(host_cpu).supermin.hostfiles
-endif
-
-# This is for building the normal appliance:
-$(INITRAMFSIMG) $(VMLINUZ): $(top_builddir)/initramfs/fakeroot.log
-
-$(top_builddir)/initramfs/fakeroot.log: make.sh kmod.whitelist packagelist $(top_builddir)/daemon/guestfsd
- mv $(INITRAMFSIMG) $(INITRAMFSIMG).bak 2>/dev/null; :
- mv $(VMLINUZ) $(VMLINUZ).bak 2>/dev/null; :
- if ! bash make.sh; then rm -f $@; exit 1; fi
+fs_DATA =
+superminfs_DATA = \
+ supermin.d/base.img \
+ supermin.d/daemon.img \
+ supermin.d/init.img \
+ supermin.d/hostfiles
# This used to be a configure-generated file (as is update.sh still).
# However config.status always touches the destination file, which
chmod +x $@-t
mv $@-t $@
-$(INITRAMFSIMG): $(top_builddir)/initramfs/fakeroot.log $(top_builddir)/daemon/guestfsd init update.sh
- rm -f $@
- bash update.sh
- touch $@
-
-kmod.whitelist: kmod.whitelist.in
- grep -v '^[[:space:]]*$$' < $< | grep -v '^#' > $@
-
packagelist: packagelist.in
- cpp -undef -D$(DIST)=1 < $< | \
- grep -v '^[[:space:]]*$$' | grep -v '^#' > $@
-
-# This is for building the supermin appliance. It has to be enabled
-# specifically with './configure --enable-supermin'. You really need
-# to read the README file.
-
-if SUPERMIN
-
-# First we need to decide which files go in and out of the supermin
-# appliance. This decision is made by 'supermin-split.sh'.
-$(SUPERMINFILES): supermin.incfiles
-supermin.incfiles: $(top_builddir)/initramfs/fakeroot.log $(top_builddir)/daemon/guestfsd supermin-split.sh
- rm -f supermin.incfiles $(SUPERMINFILES)
- bash supermin-split.sh
-
-# Second we need to create a supermin appliance with just the included
-# files (leaving out the host files, which we'll add back at runtime).
-$(SUPERMINIMG): supermin.incfiles supermin-make.sh
- rm -f $@
- bash supermin-make.sh
+ cpp -undef -D$(DISTRO)=1 < $< | \
+ grep -v '^[[:space:]]*$$' | grep -v '^#' > $@-t
+ mv $@-t $@
-endif
+excludelist: excludelist.in
+ cpp -undef -D$(DISTRO)=1 < $< | \
+ grep -v '^[[:space:]]*$$' | grep -v '^#' > $@-t
+ mv $@-t $@
-# Extra symlinks needed by the Debian appliance.
-debirf_symlinks = \
- a0_prep-root \
- z0_remove-aptitude \
- z0_remove-locales \
- z1_clean-root
-noinst_DATA = $(debirf_symlinks:%=debian/modules/%)
-$(debirf_symlinks:%=debian/modules/%): stamp-debirf-modules
-stamp-debirf-modules:
- mkdir -p debian/modules
- for f in $(debirf_symlinks); do \
- ln -sf /usr/share/debirf/modules/$$f debian/modules/$$f; \
- done
+supermin.d/base.img supermin.d/hostfiles: stamp-supermin
+stamp-supermin: make.sh packagelist excludelist
+ mkdir -p supermin.d
+ rm -f $@ supermin.d/base.img supermin.d/hostfiles
+ ./make.sh
touch $@
-#----------------------------------------------------------------------
-# Extra rules for testing the appliance.
-
-# Test-boot the appliance.
-
-test-boot: emptydisk
- qemu-system-$(host_cpu) \
- -m 384 \
- -kernel $(VMLINUZ) -initrd $(INITRAMFSIMG) \
- -hda emptydisk
-
-emptydisk:
- rm -f emptydisk
- dd if=/dev/zero of=emptydisk bs=1024 count=1440
- echo 0, | sfdisk -q -C 80 -H 2 -S 18 emptydisk > /dev/null
-
-# This is a more realistic test boot command line which better
-# reflects what the library does.
+supermin.d/daemon.img: ../daemon/guestfsd
+ mkdir -p supermin.d
+ rm -f $@ $@-t
+ mkdir sbin
+ cd sbin && ln ../../daemon/guestfsd
+ echo -e "sbin\nsbin/guestfsd" | cpio --quiet -o -H newc > $@-t
+ rm -r sbin
+ mv $@-t $@
-test-boot-realistic: emptydisk
- qemu-system-$(host_cpu) \
- -m 384 \
- -kernel $(VMLINUZ) -initrd $(INITRAMFSIMG) \
- -hda emptydisk \
- -append "console=ttyS0 guestfs=10.0.2.4:6666 guestfs_rescue=1" \
- -nographic \
- -serial stdio \
- -net channel,6666:unix:/tmp/sock,server,nowait \
- -net user,vlan=0 \
- -net nic,model=virtio,vlan=0
+supermin.d/init.img: init
+ mkdir -p supermin.d
+ rm -f $@ $@-t
+ echo "init" | cpio --quiet -o -H newc > $@-t
+ mv $@-t $@
# Make clean.
-CLEANFILES = $(APPLIANCE_FILES) packagelist kmod.whitelist supermin.incfiles
+CLEANFILES = packagelist excludelist
clean-local:
- rm -rf $(top_builddir)/initramfs
+ rm -rf supermin.d