# translation of pl.po to Polish
# Piotr Drąg <piotrdrag@gmail.com>, 2009.
#
msgid ""
msgstr ""
"Project-Id-Version: pl\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-09-23 13:59+0100\n"
"PO-Revision-Date: 2009-07-29 17:31+0200\n"
"Last-Translator: Piotr Drąg <piotrdrag@gmail.com>\n"
"Language-Team: Polish <pl@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: fish/alloc.c:39
#, c-format
msgid "use 'alloc file size' to create an image\n"
msgstr "użyj \"alloc plik rozmiar\", aby utworzyć obraz\n"

#: fish/alloc.c:47
#, c-format
msgid "can't allocate or add disks after launching\n"
msgstr "nie przydzielać lub dodawaj dyski po uruchomieniu\n"

#: fish/alloc.c:94 fish/alloc.c:101
#, c-format
msgid "could not parse size specification '%s'\n"
msgstr "nie można przeanalizować określenia rozmiaru \"%s\"\n"

#: fish/cmds.c:33
msgid "Command"
msgstr ""

#: fish/cmds.c:33
msgid "Description"
msgstr ""

#: fish/cmds.c:35 fish/cmds.c:276
msgid "add a CD-ROM disk image to examine"
msgstr ""

#: fish/cmds.c:36 fish/cmds.c:273
msgid "add an image to examine or modify"
msgstr ""

#: fish/cmds.c:37 fish/cmds.c:279
msgid "add a drive in snapshot mode (read-only)"
msgstr ""

#: fish/cmds.c:38 fish/cmds.c:408
#, fuzzy
msgid "close the current Augeas handle"
msgstr "zamyka i ponownie otwiera program obsługi libguestfs"

#: fish/cmds.c:39 fish/cmds.c:414
msgid "define an Augeas node"
msgstr ""

#: fish/cmds.c:40 fish/cmds.c:411
msgid "define an Augeas variable"
msgstr ""

#: fish/cmds.c:41 fish/cmds.c:417
msgid "look up the value of an Augeas path"
msgstr ""

#: fish/cmds.c:42 fish/cmds.c:405
msgid "create a new Augeas handle"
msgstr ""

#: fish/cmds.c:43 fish/cmds.c:423
msgid "insert a sibling Augeas node"
msgstr ""

#: fish/cmds.c:44 fish/cmds.c:438
#, fuzzy
msgid "load files into the tree"
msgstr "modyfikuje plik w obrazie"

#: fish/cmds.c:45 fish/cmds.c:441
msgid "list Augeas nodes under augpath"
msgstr ""

#: fish/cmds.c:46 fish/cmds.c:432
#, fuzzy
msgid "return Augeas nodes which match augpath"
msgstr "{path} nie zgadza się z wzorem augeas"

#: fish/cmds.c:47 fish/cmds.c:429
msgid "move Augeas node"
msgstr ""

#: fish/cmds.c:48 fish/cmds.c:426
msgid "remove an Augeas path"
msgstr ""

#: fish/cmds.c:49 fish/cmds.c:435
msgid "write all pending Augeas changes to disk"
msgstr ""

#: fish/cmds.c:50 fish/cmds.c:420
msgid "set Augeas path to value"
msgstr ""

#: fish/cmds.c:51 fish/cmds.c:549
msgid "flush device buffers"
msgstr ""

#: fish/cmds.c:52 fish/cmds.c:537
msgid "get blocksize of block device"
msgstr ""

#: fish/cmds.c:53 fish/cmds.c:531
msgid "is block device set to read-only"
msgstr ""

#: fish/cmds.c:54 fish/cmds.c:546
msgid "get total size of device in bytes"
msgstr ""

#: fish/cmds.c:55 fish/cmds.c:534
msgid "get sectorsize of block device"
msgstr ""

#: fish/cmds.c:56 fish/cmds.c:543
msgid "get total size of device in 512-byte sectors"
msgstr ""

#: fish/cmds.c:57 fish/cmds.c:552
msgid "reread partition table"
msgstr ""

#: fish/cmds.c:58 fish/cmds.c:540
msgid "set blocksize of block device"
msgstr ""

#: fish/cmds.c:59 fish/cmds.c:525
msgid "set block device to read-only"
msgstr ""

#: fish/cmds.c:60 fish/cmds.c:528
msgid "set block device to read-write"
msgstr ""

#: fish/cmds.c:61 fish/cmds.c:369
msgid "list the contents of a file"
msgstr ""

#: fish/cmds.c:62 fish/cmds.c:561
msgid "compute MD5, SHAx or CRC checksum of file"
msgstr ""

#: fish/cmds.c:63 fish/cmds.c:459
#, fuzzy
msgid "change file mode"
msgstr "add_handle nie powiodło się"

#: fish/cmds.c:64 fish/cmds.c:462
msgid "change file owner and group"
msgstr ""

#: fish/cmds.c:65 fish/cmds.c:507
msgid "run a command from the guest filesystem"
msgstr ""

#: fish/cmds.c:66 fish/cmds.c:510
msgid "run a command, returning lines"
msgstr ""

#: fish/cmds.c:67 fish/cmds.c:282
msgid "add qemu parameters"
msgstr ""

#: fish/cmds.c:68 fish/cmds.c:618
msgid "copy a file"
msgstr ""

#: fish/cmds.c:69 fish/cmds.c:621
msgid "copy a file or directory recursively"
msgstr ""

#: fish/cmds.c:70 fish/cmds.c:585
msgid "debugging and internals"
msgstr ""

#: fish/cmds.c:71 fish/cmds.c:732
msgid "report file system disk space usage"
msgstr ""

#: fish/cmds.c:72 fish/cmds.c:735
msgid "report file system disk space usage (human readable)"
msgstr ""

#: fish/cmds.c:73 fish/cmds.c:630
msgid "return kernel messages"
msgstr ""

#: fish/cmds.c:74 fish/cmds.c:558
msgid "download a file to the local machine"
msgstr ""

#: fish/cmds.c:75 fish/cmds.c:627
msgid "drop kernel page cache, dentries and inodes"
msgstr ""

#: fish/cmds.c:76 fish/cmds.c:738
msgid "estimate file space usage"
msgstr ""

#: fish/cmds.c:77 fish/cmds.c:681
msgid "check an ext2/ext3 filesystem"
msgstr ""

#: fish/cmds.c:78 fish/cmds.c:942
msgid "echo arguments back to the client"
msgstr ""

#: fish/cmds.c:79 fish/cmds.c:80 fish/cmds.c:84 fish/cmds.c:85 fish/cmds.c:105
#: fish/cmds.c:106 fish/cmds.c:252 fish/cmds.c:253 fish/cmds.c:256
#: fish/cmds.c:257 fish/cmds.c:259 fish/cmds.c:260 fish/cmds.c:810
#: fish/cmds.c:813 fish/cmds.c:816 fish/cmds.c:819 fish/cmds.c:822
#: fish/cmds.c:825 fish/cmds.c:828 fish/cmds.c:831 fish/cmds.c:834
#: fish/cmds.c:837 fish/cmds.c:840 fish/cmds.c:843
#, fuzzy
msgid "return lines matching a pattern"
msgstr "{path} nie zgadza się z wzorem augeas"

#: fish/cmds.c:81 fish/cmds.c:636
msgid "test if two files have equal contents"
msgstr ""

#: fish/cmds.c:82 fish/cmds.c:465
msgid "test if file or directory exists"
msgstr ""

#: fish/cmds.c:83 fish/cmds.c:864
msgid "preallocate a file in the guest filesystem"
msgstr ""

#: fish/cmds.c:86 fish/cmds.c:504
msgid "determine file type"
msgstr ""

#: fish/cmds.c:87 fish/cmds.c:678
msgid "find all files and directories"
msgstr ""

#: fish/cmds.c:88 fish/cmds.c:609
msgid "run the filesystem checker"
msgstr ""

#: fish/cmds.c:89 fish/cmds.c:300
msgid "get the additional kernel options"
msgstr ""

#: fish/cmds.c:90 fish/cmds.c:306
msgid "get autosync mode"
msgstr ""

#: fish/cmds.c:91 fish/cmds.c:357
msgid "get direct appliance mode flag"
msgstr ""

#: fish/cmds.c:92 fish/cmds.c:600
msgid "get the ext2/3/4 filesystem label"
msgstr ""

#: fish/cmds.c:93 fish/cmds.c:606
msgid "get the ext2/3/4 filesystem UUID"
msgstr ""

#: fish/cmds.c:94 fish/cmds.c:333
msgid "get memory allocated to the qemu subprocess"
msgstr ""

#: fish/cmds.c:95 fish/cmds.c:294
msgid "get the search path"
msgstr ""

#: fish/cmds.c:96 fish/cmds.c:336
msgid "get PID of qemu subprocess"
msgstr ""

#: fish/cmds.c:97 fish/cmds.c:288
msgid "get the qemu binary"
msgstr ""

#: fish/cmds.c:98 fish/cmds.c:345
msgid "get SELinux enabled flag"
msgstr ""

#: fish/cmds.c:99 fish/cmds.c:327
msgid "get the current state"
msgstr ""

#: fish/cmds.c:100 fish/cmds.c:351
msgid "get command trace enabled flag"
msgstr ""

#: fish/cmds.c:101 fish/cmds.c:312
msgid "get verbose mode"
msgstr ""

#: fish/cmds.c:102 fish/cmds.c:915
msgid "get SELinux security context"
msgstr ""

#: fish/cmds.c:103 fish/cmds.c:126 fish/cmds.c:780 fish/cmds.c:783
msgid "list extended attributes of a file or directory"
msgstr ""

#: fish/cmds.c:104 fish/cmds.c:696
#, fuzzy
msgid "expand a wildcard path"
msgstr "rozwija wieloznaczniki w poleceniach"

#: fish/cmds.c:107 fish/cmds.c:615
msgid "install GRUB"
msgstr ""

#: fish/cmds.c:108 fish/cmds.c:720
msgid "return first 10 lines of a file"
msgstr ""

#: fish/cmds.c:109 fish/cmds.c:723
msgid "return first N lines of a file"
msgstr ""

#: fish/cmds.c:110 fish/cmds.c:645
#, fuzzy
msgid "dump a file in hexadecimal"
msgstr "modyfikuje plik w obrazie"

#: fish/cmds.c:111 fish/cmds.c:741
msgid "list files in an initrd"
msgstr ""

#: fish/cmds.c:112 fish/cmds.c:897
msgid "add an inotify watch"
msgstr ""

#: fish/cmds.c:113 fish/cmds.c:909
#, fuzzy
msgid "close the inotify handle"
msgstr "zamyka i ponownie otwiera program obsługi libguestfs"

#: fish/cmds.c:114 fish/cmds.c:906
msgid "return list of watched files that had events"
msgstr ""

#: fish/cmds.c:115 fish/cmds.c:894
#, fuzzy
msgid "create an inotify handle"
msgstr "remove_handle nie powiodło się"

#: fish/cmds.c:116 fish/cmds.c:903
msgid "return list of inotify events"
msgstr ""

#: fish/cmds.c:117 fish/cmds.c:900
#, fuzzy
msgid "remove an inotify watch"
msgstr "  Punkty montowania:\n"

#: fish/cmds.c:118 fish/cmds.c:324
msgid "is busy processing a command"
msgstr ""

#: fish/cmds.c:119 fish/cmds.c:318
msgid "is in configuration state"
msgstr ""

#: fish/cmds.c:120 fish/cmds.c:121 fish/cmds.c:468 fish/cmds.c:471
msgid "test if file exists"
msgstr ""

#: fish/cmds.c:122 fish/cmds.c:321
msgid "is launching subprocess"
msgstr ""

#: fish/cmds.c:123 fish/cmds.c:315
msgid "is ready to accept commands"
msgstr ""

#: fish/cmds.c:124 fish/cmds.c:270
msgid "kill the qemu subprocess"
msgstr ""

#: fish/cmds.c:125 fish/cmds.c:267
msgid "launch the qemu subprocess"
msgstr ""

#: fish/cmds.c:127 fish/cmds.c:378
msgid "list the block devices"
msgstr ""

#: fish/cmds.c:128 fish/cmds.c:381
msgid "list the partitions"
msgstr ""

#: fish/cmds.c:129 fish/cmds.c:372
msgid "list the files in a directory (long format)"
msgstr ""

#: fish/cmds.c:130 fish/cmds.c:131 fish/cmds.c:849 fish/cmds.c:852
#, fuzzy
msgid "create a hard link"
msgstr "remove_handle nie powiodło się"

#: fish/cmds.c:132 fish/cmds.c:133 fish/cmds.c:855 fish/cmds.c:858
#, fuzzy
msgid "create a symbolic link"
msgstr "  Punkty montowania:\n"

#: fish/cmds.c:134 fish/cmds.c:185 fish/cmds.c:792 fish/cmds.c:795
msgid "remove extended attribute of a file or directory"
msgstr ""

#: fish/cmds.c:135 fish/cmds.c:375
msgid "list the files in a directory"
msgstr ""

#: fish/cmds.c:136 fish/cmds.c:206 fish/cmds.c:786 fish/cmds.c:789
msgid "set extended attribute of a file or directory"
msgstr ""

#: fish/cmds.c:137 fish/cmds.c:516
msgid "get file information for a symbolic link"
msgstr ""

#: fish/cmds.c:138 fish/cmds.c:244 fish/cmds.c:477 fish/cmds.c:480
msgid "create an LVM volume group"
msgstr ""

#: fish/cmds.c:139 fish/cmds.c:501
msgid "remove all LVM LVs, VGs and PVs"
msgstr ""

#: fish/cmds.c:140 fish/cmds.c:588
msgid "remove an LVM logical volume"
msgstr ""

#: fish/cmds.c:141 fish/cmds.c:672
msgid "resize an LVM logical volume"
msgstr ""

#: fish/cmds.c:142 fish/cmds.c:143 fish/cmds.c:390 fish/cmds.c:399
msgid "list the LVM logical volumes (LVs)"
msgstr ""

#: fish/cmds.c:144 fish/cmds.c:453
#, fuzzy
msgid "create a directory"
msgstr "%s: nie można utworzyć folderu tymczasowego"

#: fish/cmds.c:145 fish/cmds.c:456
#, fuzzy
msgid "create a directory and parents"
msgstr "%s: nie można utworzyć folderu tymczasowego"

#: fish/cmds.c:146 fish/cmds.c:708
#, fuzzy
msgid "create a temporary directory"
msgstr "%s: nie można utworzyć folderu tymczasowego"

#: fish/cmds.c:147 fish/cmds.c:148 fish/cmds.c:149 fish/cmds.c:930
#: fish/cmds.c:933 fish/cmds.c:936
msgid "make ext2/3/4 filesystem with external journal"
msgstr ""

#: fish/cmds.c:150 fish/cmds.c:921
msgid "make ext2/3/4 external journal"
msgstr ""

#: fish/cmds.c:151 fish/cmds.c:924
msgid "make ext2/3/4 external journal with label"
msgstr ""

#: fish/cmds.c:152 fish/cmds.c:927
msgid "make ext2/3/4 external journal with UUID"
msgstr ""

#: fish/cmds.c:153 fish/cmds.c:759
msgid "make FIFO (named pipe)"
msgstr ""

#: fish/cmds.c:154 fish/cmds.c:483
#, fuzzy
msgid "make a filesystem"
msgstr "  Systemy plików:\n"

#: fish/cmds.c:155 fish/cmds.c:918
#, fuzzy
msgid "make a filesystem with block size"
msgstr "  Systemy plików:\n"

#: fish/cmds.c:156 fish/cmds.c:801
#, fuzzy
msgid "create a mountpoint"
msgstr "  Punkty montowania:\n"

#: fish/cmds.c:157 fish/cmds.c:756
msgid "make block, character or FIFO devices"
msgstr ""

#: fish/cmds.c:158 fish/cmds.c:762
msgid "make block device node"
msgstr ""

#: fish/cmds.c:159 fish/cmds.c:765
msgid "make char device node"
msgstr ""

#: fish/cmds.c:160 fish/cmds.c:747
msgid "create a swap partition"
msgstr ""

#: fish/cmds.c:161 fish/cmds.c:750
msgid "create a swap partition with a label"
msgstr ""

#: fish/cmds.c:162 fish/cmds.c:753
msgid "create a swap partition with an explicit UUID"
msgstr ""

#: fish/cmds.c:163 fish/cmds.c:891
#, fuzzy
msgid "create a swap file"
msgstr "remove_handle nie powiodło się"

#: fish/cmds.c:164 fish/cmds.c:939
msgid "load a kernel module"
msgstr ""

#: fish/cmds.c:165 fish/cmds.c:360
msgid "mount a guest disk at a position in the filesystem"
msgstr ""

#: fish/cmds.c:166 fish/cmds.c:744
#, fuzzy
msgid "mount a file using the loop device"
msgstr "modyfikuje plik w obrazie"

#: fish/cmds.c:167 fish/cmds.c:579
msgid "mount a guest disk with mount options"
msgstr ""

#: fish/cmds.c:168 fish/cmds.c:576
msgid "mount a guest disk, read-only"
msgstr ""

#: fish/cmds.c:169 fish/cmds.c:582
msgid "mount a guest disk with mount options and vfstype"
msgstr ""

#: fish/cmds.c:170 fish/cmds.c:798
#, fuzzy
msgid "show mountpoints"
msgstr "  Punkty montowania:\n"

#: fish/cmds.c:171 fish/cmds.c:495
#, fuzzy
msgid "show mounted filesystems"
msgstr "nieznany system plików {fs}\n"

#: fish/cmds.c:172 fish/cmds.c:624
#, fuzzy
msgid "move a file"
msgstr "remove_handle nie powiodło się"

#: fish/cmds.c:173 fish/cmds.c:687
msgid "probe NTFS volume"
msgstr ""

#: fish/cmds.c:174 fish/cmds.c:633
msgid "ping the guest daemon"
msgstr ""

#: fish/cmds.c:175 fish/cmds.c:474
msgid "create an LVM physical volume"
msgstr ""

#: fish/cmds.c:176 fish/cmds.c:594
msgid "remove an LVM physical volume"
msgstr ""

#: fish/cmds.c:177 fish/cmds.c:651
msgid "resize an LVM physical volume"
msgstr ""

#: fish/cmds.c:178 fish/cmds.c:179 fish/cmds.c:384 fish/cmds.c:393
msgid "list the LVM physical volumes (PVs)"
msgstr ""

#: fish/cmds.c:180 fish/cmds.c:807
#, fuzzy
msgid "read a file"
msgstr "remove_handle nie powiodło się"

#: fish/cmds.c:181 fish/cmds.c:402
msgid "read file as lines"
msgstr ""

#: fish/cmds.c:182 fish/cmds.c:771
msgid "read directories entries"
msgstr ""

#: fish/cmds.c:183 fish/cmds.c:861
msgid "read the target of a symbolic link"
msgstr ""

#: fish/cmds.c:184 fish/cmds.c:846
msgid "canonicalized absolute pathname"
msgstr ""

#: fish/cmds.c:186 fish/cmds.c:675
msgid "resize an ext2/ext3 filesystem"
msgstr ""

#: fish/cmds.c:187 fish/cmds.c:444
#, fuzzy
msgid "remove a file"
msgstr "remove_handle nie powiodło się"

#: fish/cmds.c:188 fish/cmds.c:450
msgid "remove a file or directory recursively"
msgstr ""

#: fish/cmds.c:189 fish/cmds.c:447
#, fuzzy
msgid "remove a directory"
msgstr "%s: nie można utworzyć folderu tymczasowego"

#: fish/cmds.c:190 fish/cmds.c:804
#, fuzzy
msgid "remove a mountpoint"
msgstr "  Punkty montowania:\n"

#: fish/cmds.c:191 fish/cmds.c:699
msgid "scrub (securely wipe) a device"
msgstr ""

#: fish/cmds.c:192 fish/cmds.c:702
msgid "scrub (securely wipe) a file"
msgstr ""

#: fish/cmds.c:193 fish/cmds.c:705
msgid "scrub (securely wipe) free space"
msgstr ""

#: fish/cmds.c:194 fish/cmds.c:297
msgid "add options to kernel command line"
msgstr ""

#: fish/cmds.c:195 fish/cmds.c:303
msgid "set autosync mode"
msgstr ""

#: fish/cmds.c:196 fish/cmds.c:354
msgid "enable or disable direct appliance mode"
msgstr ""

#: fish/cmds.c:197 fish/cmds.c:597
msgid "set the ext2/3/4 filesystem label"
msgstr ""

#: fish/cmds.c:198 fish/cmds.c:603
msgid "set the ext2/3/4 filesystem UUID"
msgstr ""

#: fish/cmds.c:199 fish/cmds.c:330
msgid "set memory allocated to the qemu subprocess"
msgstr ""

#: fish/cmds.c:200 fish/cmds.c:291
msgid "set the search path"
msgstr ""

#: fish/cmds.c:201 fish/cmds.c:285
msgid "set the qemu binary"
msgstr ""

#: fish/cmds.c:202 fish/cmds.c:342
msgid "set SELinux enabled or disabled at appliance boot"
msgstr ""

#: fish/cmds.c:203 fish/cmds.c:348
msgid "enable or disable command traces"
msgstr ""

#: fish/cmds.c:204 fish/cmds.c:309
msgid "set verbose mode"
msgstr ""

#: fish/cmds.c:205 fish/cmds.c:912
msgid "set SELinux security context"
msgstr ""

#: fish/cmds.c:207 fish/cmds.c:208 fish/cmds.c:486 fish/cmds.c:774
msgid "create partitions on a block device"
msgstr ""

#: fish/cmds.c:209 fish/cmds.c:654
msgid "modify a single partition on a block device"
msgstr ""

#: fish/cmds.c:210 fish/cmds.c:663
msgid "display the disk geometry from the partition table"
msgstr ""

#: fish/cmds.c:211 fish/cmds.c:660
#, fuzzy
msgid "display the kernel geometry"
msgstr "wyświetla wiersz tekstu"

#: fish/cmds.c:212 fish/cmds.c:657
msgid "display the partition table"
msgstr ""

#: fish/cmds.c:213 fish/cmds.c:690
msgid "run a command via the shell"
msgstr ""

#: fish/cmds.c:214 fish/cmds.c:693
msgid "run a command via the shell returning lines"
msgstr ""

#: fish/cmds.c:215 fish/cmds.c:684
msgid "sleep for some seconds"
msgstr ""

#: fish/cmds.c:216 fish/cmds.c:513
msgid "get file information"
msgstr ""

#: fish/cmds.c:217 fish/cmds.c:519
msgid "get file system statistics"
msgstr ""

#: fish/cmds.c:218 fish/cmds.c:219 fish/cmds.c:639 fish/cmds.c:642
msgid "print the printable strings in a file"
msgstr ""

#: fish/cmds.c:220 fish/cmds.c:870
msgid "disable swap on device"
msgstr ""

#: fish/cmds.c:221 fish/cmds.c:876
msgid "disable swap on file"
msgstr ""

#: fish/cmds.c:222 fish/cmds.c:882
msgid "disable swap on labeled swap partition"
msgstr ""

#: fish/cmds.c:223 fish/cmds.c:888
msgid "disable swap on swap partition by UUID"
msgstr ""

#: fish/cmds.c:224 fish/cmds.c:867
msgid "enable swap on device"
msgstr ""

#: fish/cmds.c:225 fish/cmds.c:873
#, fuzzy
msgid "enable swap on file"
msgstr "remove_handle nie powiodło się"

#: fish/cmds.c:226 fish/cmds.c:879
#, fuzzy
msgid "enable swap on labeled swap partition"
msgstr "remove_handle nie powiodło się"

#: fish/cmds.c:227 fish/cmds.c:885
msgid "enable swap on swap partition by UUID"
msgstr ""

#: fish/cmds.c:228 fish/cmds.c:363
msgid "sync disks, writes are flushed through to the disk image"
msgstr ""

#: fish/cmds.c:229 fish/cmds.c:726
msgid "return last 10 lines of a file"
msgstr ""

#: fish/cmds.c:230 fish/cmds.c:729
msgid "return last N lines of a file"
msgstr ""

#: fish/cmds.c:231 fish/cmds.c:564
msgid "unpack tarfile to directory"
msgstr ""

#: fish/cmds.c:232 fish/cmds.c:567
msgid "pack directory into tarfile"
msgstr ""

#: fish/cmds.c:233 fish/cmds.c:570
msgid "unpack compressed tarball to directory"
msgstr ""

#: fish/cmds.c:234 fish/cmds.c:573
msgid "pack directory into compressed tarball"
msgstr ""

#: fish/cmds.c:235 fish/cmds.c:366
msgid "update file timestamps or create a new file"
msgstr ""

#: fish/cmds.c:236 fish/cmds.c:522
msgid "get ext2/ext3/ext4 superblock details"
msgstr ""

#: fish/cmds.c:237 fish/cmds.c:768
msgid "set file mode creation mask (umask)"
msgstr ""

#: fish/cmds.c:238 fish/cmds.c:492
#, fuzzy
msgid "unmount a filesystem"
msgstr "nieznany system plików {fs}\n"

#: fish/cmds.c:239 fish/cmds.c:498
#, fuzzy
msgid "unmount all filesystems"
msgstr "nieznany system plików {fs}\n"

#: fish/cmds.c:240 fish/cmds.c:555
msgid "upload a file from the local machine"
msgstr ""

#: fish/cmds.c:241 fish/cmds.c:339
msgid "get the library version number"
msgstr ""

#: fish/cmds.c:242 fish/cmds.c:669
msgid "activate or deactivate some volume groups"
msgstr ""

#: fish/cmds.c:243 fish/cmds.c:666
msgid "activate or deactivate all volume groups"
msgstr ""

#: fish/cmds.c:245 fish/cmds.c:591
msgid "remove an LVM volume group"
msgstr ""

#: fish/cmds.c:246 fish/cmds.c:247 fish/cmds.c:387 fish/cmds.c:396
msgid "list the LVM volume groups (VGs)"
msgstr ""

#: fish/cmds.c:248 fish/cmds.c:717
msgid "count characters in a file"
msgstr ""

#: fish/cmds.c:249 fish/cmds.c:711
msgid "count lines in a file"
msgstr ""

#: fish/cmds.c:250 fish/cmds.c:714
msgid "count words in a file"
msgstr ""

#: fish/cmds.c:251 fish/cmds.c:489
#, fuzzy
msgid "create a file"
msgstr "remove_handle nie powiodło się"

#: fish/cmds.c:254 fish/cmds.c:612
msgid "write zeroes to the device"
msgstr ""

#: fish/cmds.c:255 fish/cmds.c:648
msgid "zero unused inodes and disk blocks on ext2/3 filesystem"
msgstr ""

#: fish/cmds.c:258 fish/cmds.c:777
msgid "determine file type inside a compressed file"
msgstr ""

#: fish/cmds.c:261
msgid "Use -h <cmd> / help <cmd> to show detailed help for a command."
msgstr ""

#: fish/cmds.c:1190 fish/cmds.c:1202 fish/cmds.c:1215 fish/cmds.c:1229
#: fish/cmds.c:1243 fish/cmds.c:1258 fish/cmds.c:1273 fish/cmds.c:1286
#: fish/cmds.c:1301 fish/cmds.c:1314 fish/cmds.c:1329 fish/cmds.c:1342
#: fish/cmds.c:1356 fish/cmds.c:1369 fish/cmds.c:1384 fish/cmds.c:1397
#: fish/cmds.c:1411 fish/cmds.c:1425 fish/cmds.c:1439 fish/cmds.c:1453
#: fish/cmds.c:1467 fish/cmds.c:1482 fish/cmds.c:1495 fish/cmds.c:1509
#: fish/cmds.c:1523 fish/cmds.c:1539 fish/cmds.c:1552 fish/cmds.c:1567
#: fish/cmds.c:1580 fish/cmds.c:1595 fish/cmds.c:1608 fish/cmds.c:1624
#: fish/cmds.c:1638 fish/cmds.c:1651 fish/cmds.c:1665 fish/cmds.c:1682
#: fish/cmds.c:1699 fish/cmds.c:1715 fish/cmds.c:1730 fish/cmds.c:1745
#: fish/cmds.c:1760 fish/cmds.c:1775 fish/cmds.c:1790 fish/cmds.c:1805
#: fish/cmds.c:1820 fish/cmds.c:1836 fish/cmds.c:1854 fish/cmds.c:1868
#: fish/cmds.c:1882 fish/cmds.c:1901 fish/cmds.c:1920 fish/cmds.c:1938
#: fish/cmds.c:1955 fish/cmds.c:1971 fish/cmds.c:1988 fish/cmds.c:2003
#: fish/cmds.c:2019 fish/cmds.c:2031 fish/cmds.c:2044 fish/cmds.c:2061
#: fish/cmds.c:2075 fish/cmds.c:2089 fish/cmds.c:2103 fish/cmds.c:2117
#: fish/cmds.c:2132 fish/cmds.c:2149 fish/cmds.c:2165 fish/cmds.c:2181
#: fish/cmds.c:2197 fish/cmds.c:2213 fish/cmds.c:2228 fish/cmds.c:2247
#: fish/cmds.c:2264 fish/cmds.c:2283 fish/cmds.c:2305 fish/cmds.c:2321
#: fish/cmds.c:2334 fish/cmds.c:2349 fish/cmds.c:2361 fish/cmds.c:2374
#: fish/cmds.c:2391 fish/cmds.c:2410 fish/cmds.c:2429 fish/cmds.c:2446
#: fish/cmds.c:2463 fish/cmds.c:2480 fish/cmds.c:2497 fish/cmds.c:2511
#: fish/cmds.c:2525 fish/cmds.c:2541 fish/cmds.c:2557 fish/cmds.c:2574
#: fish/cmds.c:2589 fish/cmds.c:2605 fish/cmds.c:2621 fish/cmds.c:2635
#: fish/cmds.c:2650 fish/cmds.c:2666 fish/cmds.c:2682 fish/cmds.c:2701
#: fish/cmds.c:2717 fish/cmds.c:2733 fish/cmds.c:2749 fish/cmds.c:2765
#: fish/cmds.c:2782 fish/cmds.c:2801 fish/cmds.c:2819 fish/cmds.c:2839
#: fish/cmds.c:2853 fish/cmds.c:2867 fish/cmds.c:2882 fish/cmds.c:2897
#: fish/cmds.c:2915 fish/cmds.c:2930 fish/cmds.c:2948 fish/cmds.c:2965
#: fish/cmds.c:2980 fish/cmds.c:2996 fish/cmds.c:3012 fish/cmds.c:3028
#: fish/cmds.c:3043 fish/cmds.c:3056 fish/cmds.c:3071 fish/cmds.c:3085
#: fish/cmds.c:3102 fish/cmds.c:3120 fish/cmds.c:3138 fish/cmds.c:3155
#: fish/cmds.c:3169 fish/cmds.c:3188 fish/cmds.c:3207 fish/cmds.c:3224
#: fish/cmds.c:3241 fish/cmds.c:3258 fish/cmds.c:3273 fish/cmds.c:3291
#: fish/cmds.c:3306 fish/cmds.c:3320 fish/cmds.c:3337 fish/cmds.c:3351
#: fish/cmds.c:3366 fish/cmds.c:3383 fish/cmds.c:3400 fish/cmds.c:3417
#: fish/cmds.c:3434 fish/cmds.c:3448 fish/cmds.c:3462 fish/cmds.c:3476
#: fish/cmds.c:3493 fish/cmds.c:3509 fish/cmds.c:3525 fish/cmds.c:3541
#: fish/cmds.c:3559 fish/cmds.c:3577 fish/cmds.c:3595 fish/cmds.c:3612
#: fish/cmds.c:3627 fish/cmds.c:3643 fish/cmds.c:3659 fish/cmds.c:3677
#: fish/cmds.c:3692 fish/cmds.c:3707 fish/cmds.c:3723 fish/cmds.c:3741
#: fish/cmds.c:3759 fish/cmds.c:3777 fish/cmds.c:3797 fish/cmds.c:3814
#: fish/cmds.c:3830 fish/cmds.c:3848 fish/cmds.c:3866 fish/cmds.c:3884
#: fish/cmds.c:3901 fish/cmds.c:3921 fish/cmds.c:3941 fish/cmds.c:3959
#: fish/cmds.c:3975 fish/cmds.c:3989 fish/cmds.c:4005 fish/cmds.c:4019
#: fish/cmds.c:4034 fish/cmds.c:4052 fish/cmds.c:4071 fish/cmds.c:4090
#: fish/cmds.c:4109 fish/cmds.c:4128 fish/cmds.c:4147 fish/cmds.c:4166
#: fish/cmds.c:4185 fish/cmds.c:4204 fish/cmds.c:4223 fish/cmds.c:4242
#: fish/cmds.c:4261 fish/cmds.c:4279 fish/cmds.c:4297 fish/cmds.c:4313
#: fish/cmds.c:4329 fish/cmds.c:4345 fish/cmds.c:4360 fish/cmds.c:4378
#: fish/cmds.c:4393 fish/cmds.c:4407 fish/cmds.c:4421 fish/cmds.c:4435
#: fish/cmds.c:4449 fish/cmds.c:4463 fish/cmds.c:4477 fish/cmds.c:4491
#: fish/cmds.c:4505 fish/cmds.c:4519 fish/cmds.c:4534 fish/cmds.c:4551
#: fish/cmds.c:4564 fish/cmds.c:4579 fish/cmds.c:4594 fish/cmds.c:4607
#: fish/cmds.c:4620 fish/cmds.c:4638 fish/cmds.c:4655 fish/cmds.c:4672
#: fish/cmds.c:4690 fish/cmds.c:4709 fish/cmds.c:4729 fish/cmds.c:4749
#: fish/cmds.c:4766 fish/cmds.c:4780
#, c-format
msgid "%s should have %d parameter(s)\n"
msgstr ""

#: fish/cmds.c:1191 fish/cmds.c:1203 fish/cmds.c:1216 fish/cmds.c:1230
#: fish/cmds.c:1244 fish/cmds.c:1259 fish/cmds.c:1274 fish/cmds.c:1287
#: fish/cmds.c:1302 fish/cmds.c:1315 fish/cmds.c:1330 fish/cmds.c:1343
#: fish/cmds.c:1357 fish/cmds.c:1370 fish/cmds.c:1385 fish/cmds.c:1398
#: fish/cmds.c:1412 fish/cmds.c:1426 fish/cmds.c:1440 fish/cmds.c:1454
#: fish/cmds.c:1468 fish/cmds.c:1483 fish/cmds.c:1496 fish/cmds.c:1510
#: fish/cmds.c:1524 fish/cmds.c:1540 fish/cmds.c:1553 fish/cmds.c:1568
#: fish/cmds.c:1581 fish/cmds.c:1596 fish/cmds.c:1609 fish/cmds.c:1625
#: fish/cmds.c:1639 fish/cmds.c:1652 fish/cmds.c:1666 fish/cmds.c:1683
#: fish/cmds.c:1700 fish/cmds.c:1716 fish/cmds.c:1731 fish/cmds.c:1746
#: fish/cmds.c:1761 fish/cmds.c:1776 fish/cmds.c:1791 fish/cmds.c:1806
#: fish/cmds.c:1821 fish/cmds.c:1837 fish/cmds.c:1855 fish/cmds.c:1869
#: fish/cmds.c:1883 fish/cmds.c:1902 fish/cmds.c:1921 fish/cmds.c:1939
#: fish/cmds.c:1956 fish/cmds.c:1972 fish/cmds.c:1989 fish/cmds.c:2004
#: fish/cmds.c:2020 fish/cmds.c:2032 fish/cmds.c:2045 fish/cmds.c:2062
#: fish/cmds.c:2076 fish/cmds.c:2090 fish/cmds.c:2104 fish/cmds.c:2118
#: fish/cmds.c:2133 fish/cmds.c:2150 fish/cmds.c:2166 fish/cmds.c:2182
#: fish/cmds.c:2198 fish/cmds.c:2214 fish/cmds.c:2229 fish/cmds.c:2248
#: fish/cmds.c:2265 fish/cmds.c:2284 fish/cmds.c:2306 fish/cmds.c:2322
#: fish/cmds.c:2335 fish/cmds.c:2350 fish/cmds.c:2362 fish/cmds.c:2375
#: fish/cmds.c:2392 fish/cmds.c:2411 fish/cmds.c:2430 fish/cmds.c:2447
#: fish/cmds.c:2464 fish/cmds.c:2481 fish/cmds.c:2498 fish/cmds.c:2512
#: fish/cmds.c:2526 fish/cmds.c:2542 fish/cmds.c:2558 fish/cmds.c:2575
#: fish/cmds.c:2590 fish/cmds.c:2606 fish/cmds.c:2622 fish/cmds.c:2636
#: fish/cmds.c:2651 fish/cmds.c:2667 fish/cmds.c:2683 fish/cmds.c:2702
#: fish/cmds.c:2718 fish/cmds.c:2734 fish/cmds.c:2750 fish/cmds.c:2766
#: fish/cmds.c:2783 fish/cmds.c:2802 fish/cmds.c:2820 fish/cmds.c:2840
#: fish/cmds.c:2854 fish/cmds.c:2868 fish/cmds.c:2883 fish/cmds.c:2898
#: fish/cmds.c:2916 fish/cmds.c:2931 fish/cmds.c:2949 fish/cmds.c:2966
#: fish/cmds.c:2981 fish/cmds.c:2997 fish/cmds.c:3013 fish/cmds.c:3029
#: fish/cmds.c:3044 fish/cmds.c:3057 fish/cmds.c:3072 fish/cmds.c:3086
#: fish/cmds.c:3103 fish/cmds.c:3121 fish/cmds.c:3139 fish/cmds.c:3156
#: fish/cmds.c:3170 fish/cmds.c:3189 fish/cmds.c:3208 fish/cmds.c:3225
#: fish/cmds.c:3242 fish/cmds.c:3259 fish/cmds.c:3274 fish/cmds.c:3292
#: fish/cmds.c:3307 fish/cmds.c:3321 fish/cmds.c:3338 fish/cmds.c:3352
#: fish/cmds.c:3367 fish/cmds.c:3384 fish/cmds.c:3401 fish/cmds.c:3418
#: fish/cmds.c:3435 fish/cmds.c:3449 fish/cmds.c:3463 fish/cmds.c:3477
#: fish/cmds.c:3494 fish/cmds.c:3510 fish/cmds.c:3526 fish/cmds.c:3542
#: fish/cmds.c:3560 fish/cmds.c:3578 fish/cmds.c:3596 fish/cmds.c:3613
#: fish/cmds.c:3628 fish/cmds.c:3644 fish/cmds.c:3660 fish/cmds.c:3678
#: fish/cmds.c:3693 fish/cmds.c:3708 fish/cmds.c:3724 fish/cmds.c:3742
#: fish/cmds.c:3760 fish/cmds.c:3778 fish/cmds.c:3798 fish/cmds.c:3815
#: fish/cmds.c:3831 fish/cmds.c:3849 fish/cmds.c:3867 fish/cmds.c:3885
#: fish/cmds.c:3902 fish/cmds.c:3922 fish/cmds.c:3942 fish/cmds.c:3960
#: fish/cmds.c:3976 fish/cmds.c:3990 fish/cmds.c:4006 fish/cmds.c:4020
#: fish/cmds.c:4035 fish/cmds.c:4053 fish/cmds.c:4072 fish/cmds.c:4091
#: fish/cmds.c:4110 fish/cmds.c:4129 fish/cmds.c:4148 fish/cmds.c:4167
#: fish/cmds.c:4186 fish/cmds.c:4205 fish/cmds.c:4224 fish/cmds.c:4243
#: fish/cmds.c:4262 fish/cmds.c:4280 fish/cmds.c:4298 fish/cmds.c:4314
#: fish/cmds.c:4330 fish/cmds.c:4346 fish/cmds.c:4361 fish/cmds.c:4379
#: fish/cmds.c:4394 fish/cmds.c:4408 fish/cmds.c:4422 fish/cmds.c:4436
#: fish/cmds.c:4450 fish/cmds.c:4464 fish/cmds.c:4478 fish/cmds.c:4492
#: fish/cmds.c:4506 fish/cmds.c:4520 fish/cmds.c:4535 fish/cmds.c:4552
#: fish/cmds.c:4565 fish/cmds.c:4580 fish/cmds.c:4595 fish/cmds.c:4608
#: fish/cmds.c:4621 fish/cmds.c:4639 fish/cmds.c:4656 fish/cmds.c:4673
#: fish/cmds.c:4691 fish/cmds.c:4710 fish/cmds.c:4730 fish/cmds.c:4750
#: fish/cmds.c:4767 fish/cmds.c:4781
#, c-format
msgid "type 'help %s' for help on %s\n"
msgstr ""

#: fish/cmds.c:5475
#, c-format
msgid "%s: unknown command\n"
msgstr ""

#: fish/edit.c:86
#, c-format
msgid "use '%s filename' to edit a file\n"
msgstr "użyj \"%s nazwapliku\", aby zmodyfikować plik\n"

#: fish/fish.c:92
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr ""

#: fish/fish.c:96
#, fuzzy, c-format
msgid ""
"%s: guest filesystem shell\n"
"%s lets you edit virtual machine filesystems\n"
"Copyright (C) 2009 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] cmd [: cmd : cmd ...]\n"
"  %s -i libvirt-domain\n"
"  %s -i disk-image(s)\n"
"or for interactive use:\n"
"  %s\n"
"or from a shell script:\n"
"  %s <<EOF\n"
"  cmd\n"
"  ...\n"
"  EOF\n"
"Options:\n"
"  -h|--cmd-help        List available commands\n"
"  -h|--cmd-help cmd    Display detailed help on 'cmd'\n"
"  -a|--add image       Add image\n"
"  -D|--no-dest-paths   Don't tab-complete paths from guest fs\n"
"  -f|--file file       Read commands from file\n"
"  -i|--inspector       Run virt-inspector to get disk mountpoints\n"
"  --listen             Listen for remote commands\n"
"  -m|--mount dev[:mnt] Mount dev on mnt (if omitted, /)\n"
"  -n|--no-sync         Don't autosync\n"
"  --remote[=pid]       Send commands to remote %s\n"
"  -r|--ro              Mount read-only\n"
"  --selinux            Enable SELinux support\n"
"  -v|--verbose         Verbose messages\n"
"  -x                   Echo each command before executing it\n"
"  -V|--version         Display version and exit\n"
"For more information,  see the manpage %s(1).\n"
msgstr ""
"guestfish: powłoka systemu plików gościa\n"
"guestfish umożliwia modyfikowanie systemów pliku maszyn wirtualnych\n"
"Copyright (C) 2009 Red Hat Inc.\n"
"Użycie:\n"
"  guestfish [--opcje] polecenie [: polecenie : polecenie ...]\n"
"  guestfish -i domena-libvirt\n"
"  guestfish -i obrazy-dysków\n"
"lub dla trybu interaktywnego:\n"
"  guestfish\n"
"lub ze skryptu powłoki:\n"
"  guestfish <<EOF\n"
"  polecenie\n"
"  ...\n"
"  EOF\n"
"Opcje:\n"
"  -h|--cmd-help        Wyświetla listę dostępnych poleceń\n"
"  -h|--cmd-help polecenie Wyświetla szczegółową pomoc o \"poleceniu\"\n"
"  -a|--add image       Dodaje obraz\n"
"  -D|--no-dest-paths   Nie uzupełnia ścieżek z systemu plików gościa za\n"
"                       pomocą Tab\n"
"  -f|--file plik       Odczytuje polecenia z pliku\n"
"  -i|--inspector       Uruchamia virt-inspector, aby uzyskać punkty\n"
"                       montowania dysków\n"
"  --listen             Nasłuchuje zdalnych poleceń\n"
"  -m|--mount dev[:mnt] Montuje dev w mnt (jeśli pominięto, w /)\n"
"  -n|--no-sync         Nie synchronizuje automatycznie\n"
"  --remote[=PID]       Wysyła polecenia do zdalnego guestfish\n"
"  -r|--ro              Montuje w trybie tylko do odczytu\n"
"  -v|--verbose         Wyświetla więcej komunikatów\n"
"  -x                   Wykonuje echo każdego polecenia przed jego\n"
"                       wykonaniem\n"
"  -V|--version         Wyświetla wersję i kończy pracę\n"
"Aby dowiedzieć się więcej, zobacz stronę podręcznika guestfish(1).\n"

#: fish/fish.c:184
#, c-format
msgid "guestfs_create: failed to create handle\n"
msgstr "guestfs_create: utworzenie programu obsługi nie powiodło się\n"

#: fish/fish.c:223
#, fuzzy, c-format
msgid "%s: --listen=PID: PID was not a number: %s\n"
msgstr "guestfish: --listen=PID: PID nie był liczbą: %s\n"

#: fish/fish.c:230
#, fuzzy, c-format
msgid ""
"%s: remote: $GUESTFISH_PID must be set to the PID of the remote process\n"
msgstr ""
"guestfish: zdalnie: $GUESTFISH_PID musi być ustawiony na PID zdalnego "
"procesu\n"

#: fish/fish.c:239
#, fuzzy, c-format
msgid "%s: unknown long option: %s (%d)\n"
msgstr "guestfish: nieznana długa opcja: %s (%d)\n"

#: fish/fish.c:266
#, fuzzy, c-format
msgid "%s: only one -f parameter can be given\n"
msgstr "guestfish: można podać tylko jeden parametr -f\n"

#: fish/fish.c:339
#, fuzzy, c-format
msgid "%s: cannot use -i option with -a, -m, --listen, --remote or --selinux\n"
msgstr "guestfish: nie można użyć opcji -i z -a, -m, --listen lub --remote\n"

#: fish/fish.c:346
#, fuzzy, c-format
msgid "%s: -i requires a libvirt domain or path(s) to disk image(s)\n"
msgstr "guestfish -i wymaga domeny libvirt lub ścieżek do obrazów dysków\n"

#: fish/fish.c:356
#, fuzzy, c-format
msgid "%s: virt-inspector command too long for fixed-size buffer\n"
msgstr ""
"guestfish: polecenie virt-inspector jest za długie dla bufora o stałym "
"rozmiarze\n"

#: fish/fish.c:402
#, fuzzy, c-format
msgid "%s: cannot use --listen and --remote options at the same time\n"
msgstr ""
"guestfish: nie można używać opcji --listen i --remote w tym samym czasie\n"

#: fish/fish.c:410
#, fuzzy, c-format
msgid "%s: extra parameters on the command line with --listen flag\n"
msgstr ""
"guestfish: dodatkowe parametry wiersza poleceń za pomocą flagi --listen\n"

#: fish/fish.c:416
#, fuzzy, c-format
msgid "%s: cannot use --listen and --file options at the same time\n"
msgstr ""
"guestfish: nie można używać opcji --listen i --file w tym samym czasie\n"

#: fish/fish.c:561
#, c-format
msgid ""
"\n"
"Welcome to guestfish, the libguestfs filesystem interactive shell for\n"
"editing virtual machine filesystems.\n"
"\n"
"Type: 'help' for help with commands\n"
"      'quit' to quit the shell\n"
"\n"
msgstr ""
"\n"
"Witaj w guestfish, interaktywnej powłoce systemów plików libguestfs do\n"
"modyfikowania systemów plików maszyn wirtualnych.\n"
"\n"
"Podaj: \"help\", aby uzyskać pomoc o poleceniach\n"
"      \"quit\", aby zakończyć powłokę\n"
"\n"

#: fish/fish.c:641
#, fuzzy, c-format
msgid "%s: unterminated double quote\n"
msgstr "guestfish: niezakończony podwójny cudzysłów\n"

#: fish/fish.c:647 fish/fish.c:664
#, fuzzy, c-format
msgid "%s: command arguments not separated by whitespace\n"
msgstr "guestfish: parametry poleceń nie są oddzielone spacjami\n"

#: fish/fish.c:658
#, fuzzy, c-format
msgid "%s: unterminated single quote\n"
msgstr "guestfish: niezakończony pojedynczy cudzysłów\n"

#: fish/fish.c:713
#, fuzzy, c-format
msgid "%s: internal error parsing string at '%s'\n"
msgstr "guestfish: wewnętrzny błąd analizowania łańcucha \"%s\"\n"

#: fish/fish.c:730
#, fuzzy, c-format
msgid "%s: too many arguments\n"
msgstr "guestfish: za dużo parametrów\n"

#: fish/fish.c:759
#, fuzzy, c-format
msgid "%s: empty command on command line\n"
msgstr "guestfish: puste polecenie wiersza poleceń\n"

#: fish/fish.c:911
msgid "display a list of commands or help on a command"
msgstr "wyświetla listę poleceń lub pomoc polecenia"

#: fish/fish.c:913
msgid "quit guestfish"
msgstr "kończy pracę guestfish"

#: fish/fish.c:916
msgid "allocate an image"
msgstr "przydziela obraz"

#: fish/fish.c:918
msgid "display a line of text"
msgstr "wyświetla wiersz tekstu"

#: fish/fish.c:920
msgid "edit a file in the image"
msgstr "modyfikuje plik w obrazie"

#: fish/fish.c:922
msgid "local change directory"
msgstr "zmienia lokalny folder"

#: fish/fish.c:924
msgid "expand wildcards in command"
msgstr "rozwija wieloznaczniki w poleceniach"

#: fish/fish.c:926
msgid "view a file in the pager"
msgstr "wyświetla plik w pagerze"

#: fish/fish.c:928
msgid "close and reopen libguestfs handle"
msgstr "zamyka i ponownie otwiera program obsługi libguestfs"

#: fish/fish.c:930
msgid "measure time taken to run command"
msgstr "mierzy czas wykonania polecenia"

#: fish/fish.c:942
#, c-format
msgid ""
"alloc - allocate an image\n"
"     alloc <filename> <size>\n"
"\n"
"    This creates an empty (zeroed) file of the given size,\n"
"    and then adds so it can be further examined.\n"
"\n"
"    For more advanced image creation, see qemu-img utility.\n"
"\n"
"    Size can be specified (where <nn> means a number):\n"
"    <nn>             number of kilobytes\n"
"      eg: 1440       standard 3.5\" floppy\n"
"    <nn>K or <nn>KB  number of kilobytes\n"
"    <nn>M or <nn>MB  number of megabytes\n"
"    <nn>G or <nn>GB  number of gigabytes\n"
"    <nn>sects        number of 512 byte sectors\n"
msgstr ""
"alloc - przydziela obraz\n"
"     alloc <nazwapliku> <rozmiar>\n"
"\n"
"    Tworzy pusty (wypełniony zerami) plik o podanym rozmiarze,\n"
"    a następnie dodaje go, aby mógł być dalej badany.\n"
"\n"
"    Aby uzyskać bardziej zaawansowane tworzenie obrazu, zobacz\n"
"    narzędzie qemu-img.\n"
"\n"
"    Można podać rozmiar (gdzie <nn> oznacza liczbę):\n"
"    <nn>              liczba kilobajtów\n"
"      np.: 1440       standardowa dyskietka 3.5\"\n"
"    <nn>K lub <nn>KB  liczba kilobajtów\n"
"    <nn>M lub <nn>MB  liczba megabajtów\n"
"    <nn>G lub <nn>GB  liczba gigabajtów\n"
"    <nn>sektory       liczba 512 bajtowych sektorów\n"

#: fish/fish.c:958
#, c-format
msgid ""
"echo - display a line of text\n"
"     echo [<params> ...]\n"
"\n"
"    This echos the parameters to the terminal.\n"
msgstr ""
"echo - wyświetla wiersz tekstu\n"
"     echo [<parametry> ...]\n"
"\n"
"    Wyświetla ostatnie parametry w terminalu.\n"

#: fish/fish.c:965
#, c-format
msgid ""
"edit - edit a file in the image\n"
"     edit <filename>\n"
"\n"
"    This is used to edit a file.\n"
"\n"
"    It is the equivalent of (and is implemented by)\n"
"    running \"cat\", editing locally, and then \"write-file\".\n"
"\n"
"    Normally it uses $EDITOR, but if you use the aliases\n"
"    \"vi\" or \"emacs\" you will get those editors.\n"
"\n"
"    NOTE: This will not work reliably for large files\n"
"    (> 2 MB) or binary files containing \\0 bytes.\n"
msgstr ""
"edit - modyfikuje plik w obrazie\n"
"     edit <nazwapliku>\n"
"\n"
"    Jest używane do modyfikowania pliku.\n"
"\n"
"    Jest odpowiednikiem (i jest implementowane przez)\n"
"    wykonania polecenia \"cat\", zmodyfikowania lokalnie, a\n"
"    następnie wykonania polecenia \"write-file\".\n"
"\n"
"    Normalnie używa zmiennej $EDITOR, ale jeśli zostanie użyty\n"
"    alias \"vi\" lub \"emacs\", uzyskane zostaną te edytory.\n"
"\n"
"    UWAGA: nie będzie działało poprawnie dla dużych plików\n"
"    (> 2 MB) lub plików binarnych zawierających \\0 bajtów.\n"

#: fish/fish.c:979
#, c-format
msgid ""
"lcd - local change directory\n"
"    lcd <directory>\n"
"\n"
"    Change guestfish's current directory. This command is\n"
"    useful if you want to download files to a particular\n"
"    place.\n"
msgstr ""
"lcd - zmienia lokalny folder\n"
"    lcd <folder>\n"
"\n"
"    Zmienia bieżący folder guestfish. Te polecenie jest\n"
"    przydatne, jeśli chcesz pobrać pliki do konkretnego\n"
"    miejsca.\n"

#: fish/fish.c:986
#, c-format
msgid ""
"glob - expand wildcards in command\n"
"    glob <command> [<args> ...]\n"
"\n"
"    Glob runs <command> with wildcards expanded in any\n"
"    command args.  Note that the command is run repeatedly\n"
"    once for each expanded argument.\n"
msgstr ""
"glob - rozwija wieloznaczniki w poleceniach\n"
"    glob <polecenie> [<parametry> ...]\n"
"\n"
"    Glob wykonuje <polecenie> z wieloznacznikami\n"
"    rozwiniętymi we wszystkie parametry polecenia.\n"
"    Zauważ, że polecenie jest wykonywane raz dla\n"
"    każdego rozwiniętego parametru.\n"

#: fish/fish.c:993
#, c-format
msgid ""
"help - display a list of commands or help on a command\n"
"     help cmd\n"
"     help\n"
msgstr ""
"help - wyświetla listę poleceń lub pomoc polecenia\n"
"     help polecenie\n"
"     help\n"

#: fish/fish.c:998
#, c-format
msgid ""
"more - view a file in the pager\n"
"     more <filename>\n"
"\n"
"    This is used to view a file in the pager.\n"
"\n"
"    It is the equivalent of (and is implemented by)\n"
"    running \"cat\" and using the pager.\n"
"\n"
"    Normally it uses $PAGER, but if you use the alias\n"
"    \"less\" then it always uses \"less\".\n"
"\n"
"    NOTE: This will not work reliably for large files\n"
"    (> 2 MB) or binary files containing \\0 bytes.\n"
msgstr ""
"more - wyświetla plik w pagerze\n"
"     more <nazwapliku>\n"
"\n"
"    Jest używane do wyświetlania pliku w pagerze.\n"
"\n"
"    Jest odpowiednikiem (i jest implementowane przez)\n"
"    wykonania polecenia \"cat\" i używanie pagera.\n"
"\n"
"    Normalnie używa zmiennej $PAGER, ale jeśli zostanie użyty\n"
"    alias \"less\", zawsze będzie używane polecenie \"less\".\n"
"\n"
"    UWAGA: nie będzie działało poprawnie dla dużych plików\n"
"    (> 2 MB) lub plików binarnych zawierających \\0 bajtów.\n"

#: fish/fish.c:1014
#, c-format
msgid ""
"quit - quit guestfish\n"
"     quit\n"
msgstr ""
"quit - kończy pracę guestfish\n"
"     quit\n"

#: fish/fish.c:1017
#, c-format
msgid ""
"reopen - close and reopen the libguestfs handle\n"
"     reopen\n"
"\n"
"Close and reopen the libguestfs handle.  It is not necessary to use\n"
"this normally, because the handle is closed properly when guestfish\n"
"exits.  However this is occasionally useful for testing.\n"
msgstr ""
"reopen - zamyka i ponownie otwiera program obsługi libguestfs\n"
"     reopen\n"
"\n"
"Zamyka i ponownie otwiera program obsługi libguestfs. Zwykle użycie\n"
"tego nie jest wymagane, ponieważ program obsługi jest właściwie\n"
"zamykany, kiedy guestfish kończy działania. Mimo to może być czasem\n"
"przydatne do testowania.\n"

#: fish/fish.c:1024
#, c-format
msgid ""
"time - measure time taken to run command\n"
"    time <command> [<args> ...]\n"
"\n"
"    This runs <command> as usual, and prints the elapsed\n"
"    time afterwards.\n"
msgstr ""
"time - mierzy czas wykonania polecenia\n"
"    time <polecenie> [<parametry> ...]\n"
"\n"
"    Wykonuje <polecenie> i wyświetla czas, jaki upłynął.\n"

#: fish/fish.c:1030
#, c-format
msgid "%s: command not known, use -h to list all commands\n"
msgstr ""
"%s: nieznane polecenie, użyj -h, aby wyświetlić listę wszystkich poleceń\n"

#: fish/fish.c:1186
#, c-format
msgid "Runaway quote in string \"%s\"\n"
msgstr ""

#: fish/glob.c:52
#, c-format
msgid "use 'glob command [args...]'\n"
msgstr "użyj \"glob polecenie [parametry...]\"\n"

#: fish/glob.c:72
#, c-format
msgid "glob: guestfs_glob_expand call failed: %s\n"
msgstr "glob: wywołanie guestfs_glob_expand nie powiodło się: %s\n"

#: fish/lcd.c:34
#, c-format
msgid "use 'lcd directory' to change local directory\n"
msgstr "użyj \"lcd folder\", aby zmienić lokalny folder\n"

#: fish/more.c:40
#, c-format
msgid "use '%s filename' to page a file\n"
msgstr "użyj \"%s nazwapliku\", aby wyświetlić plik\n"

#: fish/rc.c:249
#, c-format
msgid "guestfish: protocol error: could not read 'hello' message\n"
msgstr "guestfish: błąd protokołu: nie można odczytać komunikatu \"hello\"\n"

#: fish/rc.c:254
#, c-format
msgid ""
"guestfish: protocol error: version mismatch, server version '%s' does not "
"match client version '%s'.  The two versions must match exactly.\n"
msgstr ""
"guestfish: błąd protokołu: wersja się nie zgadza, wersja serwera \"%s\" nie "
"zgadza się z wersją klienta \"%s\". Obie wersje muszą się dokładnie "
"zgadzać.\n"

#: fish/rc.c:329 fish/rc.c:343
#, c-format
msgid "guestfish: remote: looks like the server is not running\n"
msgstr "guestfish: zdalnie: wygląda na to, że serwer nie jest uruchomiony\n"

#: fish/rc.c:355 fish/rc.c:369
#, c-format
msgid "guestfish: protocol error: could not send initial greeting to server\n"
msgstr ""
"guestfish: błąd protokołu: nie można wysłać początkowego powitania do "
"serwera\n"

#: fish/rc.c:380
#, c-format
msgid "guestfish: protocol error: could not decode reply from server\n"
msgstr "guestfish: błąd protokołu: nie można dekodować odpowiedzi od serwera\n"

#: fish/reopen.c:36
#, c-format
msgid "'reopen' command takes no parameters\n"
msgstr "polecenie \"reopen\" nie przyjmuje parametrów\n"

#: fish/reopen.c:46
#, c-format
msgid "reopen: guestfs_create: failed to create handle\n"
msgstr "reopen: guestfs_create: utworzenie programu obsługi nie powiodło się\n"

#: fish/time.c:35
#, c-format
msgid "use 'time command [args...]'\n"
msgstr "użyj \"time polecenie [parametry...]\"\n"

#: src/guestfs.c:247
#, c-format
msgid "guestfs_close: called twice on the same handle\n"
msgstr "guestfs_close: wywołano dwa razy w tym samym programie obsługującym\n"

#: src/guestfs.c:350
#, c-format
msgid "libguestfs: error: %s\n"
msgstr "libguestfs: błąd: %s\n"

#: src/guestfs.c:688
msgid "command line cannot be altered after qemu subprocess launched"
msgstr ""
"wiersz poleceń nie może zostać zmieniony po uruchomieniu podprocesu QEMU"

#: src/guestfs.c:702
msgid "guestfs_config: parameter must begin with '-' character"
msgstr "guestfs_config: parametr musi zaczynać się od znaku \"-\""

#: src/guestfs.c:716
#, c-format
msgid "guestfs_config: parameter '%s' isn't allowed"
msgstr "guestfs_config: parametr \"%s\" nie jest dozwolony"

#: src/guestfs.c:736 src/guestfs.c:775 src/guestfs.c:793
msgid "filename cannot contain ',' (comma) character"
msgstr "nazwa pliku nie może zawierać znaku \",\" (przecinka)"

#: src/guestfs.c:874
msgid "you must call guestfs_add_drive before guestfs_launch"
msgstr "należy wywołać guestfs_add_drive przed guestfs_launch"

#: src/guestfs.c:879
msgid "qemu has already been launched"
msgstr "QEMU zostało już uruchomione"

#: src/guestfs.c:887
#, c-format
msgid "%s: cannot create temporary directory"
msgstr "%s: nie można utworzyć folderu tymczasowego"

#: src/guestfs.c:977
#, c-format
msgid "cannot find %s or %s on LIBGUESTFS_PATH (current path = %s)"
msgstr "nie można znaleźć %s lub %s w LIBGUESTFS_PATH (bieżąca ścieżka = %s)"

#: src/guestfs.c:1347
msgid "failed to connect to vmchannel socket"
msgstr "połączenie się z gniazdem kanału maszyny wirtualnej nie powiodło się"

#: src/guestfs.c:1366
#, fuzzy
msgid "guestfs_launch failed, see earlier error messages"
msgstr ""
"guestfs_wait_ready nie powiodło się, zobacz wcześniejsze komunikaty błędów"

#: src/guestfs.c:1376
msgid "qemu launched and contacted daemon, but state != READY"
msgstr ""
"QEMU zostało uruchomione i skontaktowano się z demonem, ale stan != GOTOWY"

#: src/guestfs.c:1462
#, c-format
msgid "external command failed: %s"
msgstr "zewnętrzne polecenie nie powiodło się: %s"

#: src/guestfs.c:1501
#, c-format
msgid ""
"%s: command failed: If qemu is located on a non-standard path, try setting "
"the LIBGUESTFS_QEMU environment variable."
msgstr ""
"%s: polecenie nie powiodło się: jeśli QEMU jest położone w niestandardowej "
"ścieżce, spróbuj ustawienia zmiennej środowiskowej LIBGUESTFS_QEMU."

#: src/guestfs.c:1640
msgid "qemu has not been launched yet"
msgstr "QEMU nie zostało jeszcze uruchomione"

#: src/guestfs.c:1651
msgid "no subprocess to kill"
msgstr "brak podprocesu do zniszczenia"

#: src/guestfs.c:1773
#, c-format
msgid "guestfs_set_busy: called when in state %d != READY"
msgstr "guestfs_set_busy: wywołano, kiedy w stanie %d != GOTOWY"

#: src/guestfs.c:1796
#, c-format
msgid "guestfs_end_busy: called when in state %d"
msgstr "guestfs_end_busy: wywołano, kiedy w stanie %d"

#: src/guestfs.c:1904
#, fuzzy, c-format
msgid ""
"check_for_daemon_cancellation_or_eof: read 0x%x from daemon, expected 0x%x\n"
msgstr ""
"check_for_daemon_cancellation: odczytano 0x%x z demona, oczekiwano 0x%x\n"

#: src/guestfs.c:2062 src/guestfs.c:2116
msgid "unexpected end of file when reading from daemon"
msgstr ""

#: src/guestfs.c:2078
#, c-format
msgid "received magic signature from guestfsd, but in state %d"
msgstr "otrzymano podpis magic z guestfsd, ale w stanie %d"

#: src/guestfs.c:2093
#, c-format
msgid "message length (%u) > maximum possible size (%d)"
msgstr "długość komunikatu (%u) > maksymalny możliwy rozmiar (%d)"

#: src/guestfs.c:2215
#, fuzzy, c-format
msgid "guestfs___send: state %d != BUSY"
msgstr "guestfs__send_sync: stan %d != ZAJĘTY"

#: src/guestfs.c:2237
msgid "xdr_guestfs_message_header failed"
msgstr "xdr_guestfs_message_header nie powiodło się"

#: src/guestfs.c:2246
msgid "dispatch failed to marshal args"
msgstr "rozdzielenie parametrów marszałka nie powiodło się"

#: src/guestfs.c:2376
#, fuzzy, c-format
msgid "send_file_chunk: state %d != READY"
msgstr "send_file_chunk_sync: stan %d != GOTOWY"

#: src/guestfs.c:2392
#, c-format
msgid "xdr_guestfs_chunk failed (buf = %p, buflen = %zu)"
msgstr "xdr_guestfs_chunk nie powiodło się (bufor = %p, długość bufora = %zu)"

#: src/guestfs.c:2516
#, c-format
msgid "%s: error in chunked encoding"
msgstr "%s: błąd w kodowaniu fragmentu"

#: src/guestfs.c:2544
msgid "write to daemon socket"
msgstr "zapisz do gniazda demona"

#: src/guestfs.c:2567
#, fuzzy
msgid "receive_file_data: parse error in reply callback"
msgstr ""
"receive_file_data_sync: błąd analizy w odpowiedzi wywołania zwrotnego\n"

#: src/guestfs.c:2572
msgid "receive_file_data: unexpected flag received when reading file chunks"
msgstr ""

#: src/guestfs.c:2580
msgid "failed to parse file chunk"
msgstr "przeanalizowanie fragmentu pliku nie powiodło się"

#: src/guestfs.c:2589
msgid "file receive cancelled by daemon"
msgstr "otrzymanie pliku zostało anulowane przez demona"

#: test-tool/test-tool.c:59
#, c-format
msgid ""
"libguestfs-test-tool: interactive test tool\n"
"Copyright (C) 2009 Red Hat Inc.\n"
"Usage:\n"
"  libguestfs-test-tool [--options]\n"
"Options:\n"
"  --help         Display usage\n"
"  --helper libguestfs-test-tool-helper\n"
"                 Helper program (default: %s)\n"
"  --qemudir dir  Specify QEMU source directory\n"
"  --qemu qemu    Specify QEMU binary\n"
"  --timeout n\n"
"  -t n           Set launch timeout (default: %d seconds)\n"
msgstr ""
"libguestfs-test-tool: interaktywne narzędzie testowania\n"
"Copyright (C) 2009 Red Hat Inc.\n"
"Użycie:\n"
"  libguestfs-test-tool [--opcje]\n"
"Opcje:\n"
"  --help         Wyświetla użycie\n"
"  --helper libguestfs-test-tool-helper\n"
"                 Program pomocniczy (domyślnie: %s)\n"
"  --qemudir folder Podaje folder źródłowy QEMU\n"
"  --qemu QEMU    Podaje plik binarny QEMU\n"
"  --timeout n\n"
"  -t n           Ustawia czas oczekiwania na uruchomienie\n"
"                 (domyślnie: %d sekundy)\n"

#: test-tool/test-tool.c:111
#, c-format
msgid "libguestfs-test-tool: unknown long option: %s (%d)\n"
msgstr "libguestfs-test-tool: nieznana długa opcja: %s (%d)\n"

#: test-tool/test-tool.c:120
#, c-format
msgid "libguestfs-test-tool: invalid timeout: %s\n"
msgstr "libguestfs-test-tool: nieprawidłowy czas oczekiwania: %s\n"

#: test-tool/test-tool.c:132
#, c-format
msgid "libguestfs-test-tool: unexpected command line option 0x%x\n"
msgstr "libguestfs-test-tool: nieoczekiwana opcja wiersza poleceń 0x%x\n"

#: test-tool/test-tool.c:155
#, c-format
msgid "libguestfs-test-tool: failed to create libguestfs handle\n"
msgstr ""
"libguestfs-test-tool: utworzenie programu obsługi libguestfs nie powiodło "
"się\n"

#: test-tool/test-tool.c:160 test-tool/test-tool.c:166
#, c-format
msgid "libguestfs-test-tool: failed to add drive '%s'\n"
msgstr "libguestfs-test-tool: dodanie napędu \"%s\" nie powiodło się\n"

#: test-tool/test-tool.c:174
#, c-format
msgid "libguestfs-test-tool: guestfs_version failed\n"
msgstr "libguestfs-test-tool: guestfs_version nie powiodło się\n"

#: test-tool/test-tool.c:196
#, c-format
msgid "libguestfs-test-tool: failed to launch appliance\n"
msgstr "libguestfs-test-tool: uruchomienie przyrządu nie powiodło się\n"

#: test-tool/test-tool.c:208
#, c-format
msgid "libguestfs-test-tool: failed to run sfdisk\n"
msgstr "libguestfs-test-tool: wykonanie sfdisk nie powiodło się\n"

#: test-tool/test-tool.c:214
#, c-format
msgid "libguestfs-test-tool: failed to mkfs.ext2\n"
msgstr "libguestfs-test-tool: mkfs.ext2 nie powiodło się\n"

#: test-tool/test-tool.c:220
#, c-format
msgid "libguestfs-test-tool: failed to mount /dev/sda1 on /\n"
msgstr "libguestfs-test-tool: zamontowanie /dev/sda1 w / nie powiodło się\n"

#: test-tool/test-tool.c:226
#, c-format
msgid "libguestfs-test-tool: failed to mkdir /iso\n"
msgstr "libguestfs-test-tool: utworzenie folderu /iso nie powiodło się\n"

#: test-tool/test-tool.c:232
#, c-format
msgid "libguestfs-test-tool: failed to mount /dev/sdb on /iso\n"
msgstr "libguestfs-test-tool: zamontowanie /dev/sdb w /iso nie powiodło się\n"

#: test-tool/test-tool.c:240
#, c-format
msgid "libguestfs-test-tool: could not run helper program, or helper failed\n"
msgstr ""
"libguestfs-test-tool: nie można uruchomić programu pomocniczego lub program "
"nie powiódł się\n"

#: test-tool/test-tool.c:271
#, c-format
msgid ""
"LIBGUESTFS_QEMU environment variable is already set, so\n"
"--qemu/--qemudir options cannot be used.\n"
msgstr ""
"Zmienna środowiskowa LIBGUESTFS_QEMU jest już ustawiona, więc nie można\n"
"użyć opcji --qemu/--qemudir.\n"

#: test-tool/test-tool.c:279
#, c-format
msgid "Binary '%s' does not exist or is not executable\n"
msgstr "Plik binarny \"%s\" nie istnieje lub nie jest wykonywalny\n"

#: test-tool/test-tool.c:293
#, c-format
msgid "%s: does not look like a qemu source directory\n"
msgstr "%s: nie wygląda jak folder źródłowy QEMU\n"

#: test-tool/test-tool.c:342
#, c-format
msgid ""
"Test tool helper program 'libguestfs-test-tool-helper' is not\n"
"available.  Expected to find it in '%s'\n"
"\n"
"Use the --helper option to specify the location of this program.\n"
msgstr ""
"Program pomocniczy narzędzia testowania \"libguestfs-test-tool-helper\" nie\n"
"jest dostępny. Oczekiwano znalezienie go w \"%s\"\n"
"\n"
"Użyj opcji --helper, aby podać położenie tego programu.\n"

#: test-tool/test-tool.c:358
#, c-format
msgid "command failed: %s"
msgstr "polecenie nie powiodło się: %s"

#: test-tool/test-tool.c:366
#, c-format
msgid ""
"Test tool helper program %s\n"
"is not statically linked.  This is a build error when this test tool\n"
"was built.\n"
msgstr ""
"Program pomocniczy narzędzia testowania %s\n"
"nie jest skonsolidowany statycznie. Jest to błąd budowania.\n"

#: test-tool/test-tool.c:400
#, c-format
msgid "mkisofs command failed: %s\n"
msgstr "polecenie mkisofs nie powiodło się: %s\n"

#~ msgid "qemu has finished launching already"
#~ msgstr "QEMU zakończyło już uruchamianie"

#~ msgid "libguestfs-test-tool: failed or timed out in 'wait_ready'\n"
#~ msgstr ""
#~ "libguestfs-test-tool: \"wait_ready\" nie powiodło się lub przekroczyło "
#~ "czas oczekiwania\n"

#~ msgid "guestfish: unexpected command line option 0x%x\n"
#~ msgstr "guestfish: nieoczekiwane polecenie wiersza poleceń 0x%x\n"

#~ msgid "could not watch qemu stdout"
#~ msgstr "nie można obserwować standardowego wyjścia QEMU"

#~ msgid "guestfs_set_ready: called when in state %d != BUSY"
#~ msgstr "guestfs_set_ready: wywołano, kiedy w stanie %d != ZAJĘTY"

#~ msgid "stdout_event: internal error: %d != %d"
#~ msgstr "stdout_event: wewnętrzny błąd: %d != %d"

#~ msgid "sock_read_event: internal error: %d != %d"
#~ msgstr "sock_read_event: wewnętrzny błąd: %d != %d"

#~ msgid "can't decode length word"
#~ msgstr "nie można dekodować długości słowa"

#~ msgid "received magic signature from guestfsd, but msg size is %d"
#~ msgstr "otrzymano podpis magic z guestfsd, ale rozmiar komunikatu to %d"

#~ msgid "state %d != BUSY"
#~ msgstr "stan %d != ZAJĘTY"

#~ msgid "sock_write_event: internal error: %d != %d"
#~ msgstr "sock_write_event: wewnętrzny błąd: %d != %d"

#~ msgid "sock_write_event: state %d != BUSY"
#~ msgstr "sock_write_event: stan %d != ZAJĘTY"

#~ msgid "remove_handle failed"
#~ msgstr "remove_handle nie powiodło się"

#~ msgid "add_handle failed"
#~ msgstr "add_handle nie powiodło się"

#~ msgid "guestfs__send_sync: msg_out should be NULL"
#~ msgstr "guestfs__send_sync: msg_out powinno być PUSTE"

#~ msgid "send failed, see earlier error messages"
#~ msgstr "wysłanie nie powiodło się, zobacz wcześniejsze komunikaty błędów"

#~ msgid "send file chunk failed, see earlier error messages"
#~ msgstr ""
#~ "wysłanie fragmentu pliku nie powiodło się, zobacz wcześniejsze komunikaty "
#~ "błędów"

#~ msgid "receive_file_data_sync: reply callback not called\n"
#~ msgstr ""
#~ "receive_file_data_sync: nie wywołano odpowiedzi wywołania zwrotnego\n"

#~ msgid "fd %d is out of range"
#~ msgstr "fd %d jest spoza zakresu"

#~ msgid "set of events (0x%x) contains unknown events"
#~ msgstr "zestaw zdarzeń (0x%x) zawiera nieznane zdarzenia"

#~ msgid "set of events is empty"
#~ msgstr "zestaw zdarzeń jest pusty"

#~ msgid "fd %d is already registered"
#~ msgstr "fd %d jest już zarejestrowane"

#~ msgid "callback is NULL"
#~ msgstr "wywołanie zwrotne jest PUSTE"

#~ msgid "fd %d was not registered"
#~ msgstr "fd %d nie zostało zarejestrowane"

#~ msgid "select_main_loop_run: this cannot be called recursively"
#~ msgstr "select_main_loop_run: nie może zostać wywołane rekursywnie"

#~ msgid "virt-cat: no image, VM names or filenames to cat given"
#~ msgstr ""
#~ "virt-cat: nie podano obrazu, nazw maszyn wirtualnych lub nazw plików dla "
#~ "cat"

#~ msgid "no root device found in this operating system image"
#~ msgstr "nie znaleziono urządzenia root w tym obrazie systemu operacyjnego"

#~ msgid "multiboot operating systems are not supported by virt-cat"
#~ msgstr "systemy operacyjne multiboot nie są obsługiwane przez virt-cat"

#~ msgid "Virtual Machine"
#~ msgstr "Maszyna wirtualna"

#~ msgid "Filesystem"
#~ msgstr "System plików"

#~ msgid "1K-blocks"
#~ msgstr "Bloki 1K"

#~ msgid "Size"
#~ msgstr "Rozmiar"

#~ msgid "Used"
#~ msgstr "Użyte"

#~ msgid "Available"
#~ msgstr "Dostępne"

#~ msgid "Use%"
#~ msgstr "Użycie%"

#~ msgid "Inodes"
#~ msgstr "I-węzły"

#~ msgid "IUsed"
#~ msgstr "IUżyte"

#~ msgid "IFree"
#~ msgstr "IWolne"

#~ msgid "IUse%"
#~ msgstr "IUżycie%"

#~ msgid "virt-inspector: no image or VM names given"
#~ msgstr "virt-inspector: nie podano nazw obrazu lub maszyny wirtualnej"

#~ msgid "--fish output is only possible with a single OS\n"
#~ msgstr ""
#~ "wyjście --fish jest możliwe tylko za pomocą jednego systemu operacyjnego\n"

#~ msgid "virt-inspector: no YAML support\n"
#~ msgstr "virt-inspector: brak obsługi YAML\n"

#~ msgid "  Mountpoints:\n"
#~ msgstr "  Punkty montowania:\n"

#~ msgid "  Filesystems:\n"
#~ msgstr "  Systemy plików:\n"

#~ msgid "  Modprobe aliases:\n"
#~ msgstr "  Aliasy modprobe:\n"

#~ msgid "  Initrd modules:\n"
#~ msgstr "  Moduły initrd:\n"

#~ msgid "  Applications:\n"
#~ msgstr "  Aplikacje:\n"

#~ msgid "  Kernels:\n"
#~ msgstr "  Jądra:\n"

#~ msgid "  Windows Registry entries:\n"
#~ msgstr "  Wpisy rejestru Windows:\n"

#~ msgid "open_guest: first parameter must be a string or an arrayref"
#~ msgstr "open_guest: pierwszy parametr musi być łańcuchem lub arrayref"

#~ msgid "guest image {imagename} does not exist or is not readable"
#~ msgstr "obraz gościa {imagename} nie istnieje lub jest nieczytelny"

#~ msgid ""
#~ "open_guest: no libvirt support (install Sys::Virt, XML::XPath and XML::"
#~ "XPath::XMLParser)"
#~ msgstr ""
#~ "open_guest: brak obsługi libvirt (zainstaluj Sys::Virt, XML::XPath i XML::"
#~ "XPath::XMLParser)"

#~ msgid "open_guest: too many domains listed on command line"
#~ msgstr "open_guest: za dużo domen w wierszu poleceń"

#~ msgid "open_guest: cannot connect to libvirt"
#~ msgstr "open_guest: nie można połączyć się z libvirt"

#~ msgid "{imagename} is not the name of an inactive libvirt domain\n"
#~ msgstr "{imagename} nie jest nazwą nieaktywnej domeny libvirt\n"

#~ msgid "{imagename} is not the name of a libvirt domain\n"
#~ msgstr "{imagename} nie jest nazwą domeny libvirt\n"

#~ msgid "{imagename} seems to have no disk devices\n"
#~ msgstr "{imagename} wydaje się nie mieć żadnych urządzeń dysków\n"

#~ msgid "resolve_windows_path: path must start with a / character"
#~ msgstr "resolve_windows_path: ścieżka musi zaczynać się od znaku /"

#, fuzzy
#~ msgid "cpio command failed: {error}"
#~ msgstr "polecenie reged nie powiodło się: {errormsg}"

#~ msgid "reged command failed: {errormsg}"
#~ msgstr "polecenie reged nie powiodło się: {errormsg}"

#~ msgid "no output from reged command: {errormsg}"
#~ msgstr "brak wyjście polecenia reged: {errormsg}"

#~ msgid "unknown filesystem label {label}\n"
#~ msgstr "nieznana etykieta systemu plików {label}\n"

#~ msgid "unknown filesystem UUID {uuid}\n"
#~ msgstr "nieznany UUID systemu plików {uuid}\n"

#~ msgid "unknown filesystem {fs}\n"
#~ msgstr "nieznany system plików {fs}\n"

#~ msgid "{path} doesn't match augeas pattern"
#~ msgstr "{path} nie zgadza się z wzorem augeas"

#~ msgid "{filename}: could not read initrd format"
#~ msgstr "{filename}: nie można odczytać formatu initrd"

#~ msgid "virt-v2v: no image or VM names given"
#~ msgstr "virt-v2v: nie podano nazw obrazu lub maszyny wirtualnej"

#~ msgid "multiboot operating systems are not supported by v2v"
#~ msgstr "systemy operacyjne multiboot nie są obsługiwane przez v2v"